G. Dusserre, F. Schmidt, G. Dour, and G. Bernhart, Thermo-mechanical stresses in cast steel dies during glass pressing process, J. Mater. Process. Tech, pp.484-491, 2005.
URL : https://hal.archives-ouvertes.fr/hal-01788416

K. Pöting, Future trends in hollow glass production, Proceedings of the Colloquium on Modelling of Glass Forming Processes, pp.9-16, 1998.

J. Linhart and S. Linhart, Temperature measurement in the glass melt, Glass Technol, vol.43, issue.5, pp.198-202, 2002.

H. Rawson, Heat transfer modelling of the parison forming in glass manufacturing, Glass Technol, vol.39, pp.97-98, 1997.

D. Höhne, B. Pitschel, M. Merkwitz, and R. Lobig, Measurement and mathematical modeling of the heat transfer in the glass forming process, in consideration of the heat transfer coefficients and radiation influences, Glass Sci. Technol, vol.76, pp.309-317, 2003.

K. Storck, D. Loyd, and B. Augustsson, Heat transfer modelling of the parison forming in glass manufacturing, Glass Technol, vol.39, pp.210-216, 1998.

T. Loulou, R. Abou-khachfe, and J. P. Bardon, Estimation de la résistance thermique de contact durant la solidification du verre, Int. J. Therm. Sci, vol.38, pp.984-998, 1999.

R. Abou-khachfe, Estimation de la résistance thermique de contact entre un métal et une pastille de verre, Master's thesis, 1997.

R. Viskanta and J. Lim, Analysis of heat transfer during glass forming, Glass Sci. Technol, vol.74, pp.341-352, 2001.

S. K. Pchelyakov and Y. A. Guloyan, Heat transfer at the glass mould interface, Glass Ceram, vol.42, pp.400-403, 1985.

G. Keijts and K. Van-der-werff, Heat transfer in glass container production during the final blow, Glass Technol, vol.42, pp.104-108, 2001.

S. V. Tarakanov, V. K. Leko, and O. V. Mazurin, Some problems of precise measurements of heat transfer coefficients in glass melts. I: Measurements of effective conductivity, Glass Sci. Technol, vol.68, pp.301-311, 1995.

B. Sawaf, M. N. Ozisik, and Y. Jarny, An inverse analysis to estimate linearly temperature dependent thermal conductivity components and heat capacity of an orthotropic medium, Int. J. Heat Mass Transfer, vol.38, pp.3005-3010, 1995.

R. Abou-khachfe and Y. Jarny, Résolution numérique d'un problème d'estimation de source thermodépendante dans un domaine bidimensionnel, Congrès SFT99, 1999.

R. Abou-khachfe and Y. Jarny, Determination of heat sources and heat transfer coefficient for two-dimensional heat flow: Numerical and experimental study, Int. J. Heat Mass Transfer, vol.44, pp.1309-1322, 2001.

D. Maillet, S. André, J. C. Batsale, A. Degiovanni, and C. Moyne, Thermal Quadrupoles-Solving the Heat Equation through Integral Transforms, 2000.

P. Moreau, S. Grégoire, and D. Lochegnies, Méthodologie expérimentale pour la détermination du coefficient de transfert thermique à l'interface verre/outil, Verre, vol.9, pp.24-27, 2003.

R. Abou-khachfe and Y. Jarny, Numerical solution of 2-d nonlinear heat conduction problems using finite-element techniques, Numer. Heat Transfer B-Fund, vol.37, pp.45-68, 2000.

Y. Jarny, M. N. Ozisik, and J. P. Bardon, A general optimization method using adjoint equation for solving multidimensional inverse heat conduction, Int. J. Heat Mass. Transfer, vol.34, pp.2911-2919, 1991.

J. V. Beck and K. J. Arnold, Parameter Estimation in Engineering and Science, 1977.

R. Abou-khachfe, Résolution numérique de problèmes inverses 2D non linéaires de conduction de la chaleur par la méthode des éléments finis et l'algorithme du gradient conjugué-Validation expérimentale, 2000.

D. A. Mcgraw, Transfer of heat in glass during forming, J. Am. Ceram. Soc, vol.44, pp.353-363, 1961.

E. Brauns, J. Patyn, E. Wiersema, and A. Skerath, Finite element calculation of thermomechanical stresses in candidate ceramic components for press and blow moulds, Glass Technol, vol.40, pp.58-64, 1999.

S. P. Jones, P. Basnett, and G. C. Parker, BGIRA research report n ? 29, 1966.

G. Dour, M. Dargusch, C. Davidson, and A. Nef, Development of a nonintrusive heat transfer coefficient gauge and its application to high pressure die casting: Effect of the process parameters, J. Mater. Process. Tech, vol.169, pp.223-233, 2005.
URL : https://hal.archives-ouvertes.fr/hal-01851436

S. Broucaret, A. Michrafy, and G. Dour, Heat transfer and thermo-mechanical stresses in a gravity casting die: Influence of process parameters, J. Mater. Process. Tech, vol.110, pp.211-217, 2001.
URL : https://hal.archives-ouvertes.fr/hal-01718087

G. Dour, M. Dargusch, and C. Davidson, Recommendations and guidelines for the performance of accurate heat transfer measurements in rapid forming processes, Int. J. Heat Mass Transfer, vol.49, pp.1773-1789, 2006.
URL : https://hal.archives-ouvertes.fr/hal-01847812

H. Hamasaiid, Etude des phénomènes thermiques à l'interface pièce/outil en fonderie, 2007.

G. Dour, Thermal stresses and distortion in die casting processes: a new normalized approach, Modelling Simul. Mater. Sci. Eng, vol.9, pp.399-413, 2001.
URL : https://hal.archives-ouvertes.fr/hal-01703127

P. Manns, W. Döll, and G. Kleer, Glass in contact with mould materials for container production, Glass Sci. Technol, vol.68, pp.389-399, 1995.