J. Wiggenraad, A. Michielsen, D. Santoro, F. Lepage, C. Kindervater et al., Finite element methodologies development to simulate the behaviour of composite fuselage structure and correlation with drop test, Air & Space Europe, vol.3, issue.3-4, pp.3-4228, 2001.
DOI : 10.1016/S1290-0958(01)90102-9

M. Mccarthy and J. Wiggenraad, Numerical investigation of a crash test of a composite helicopter subfloor structure, Composite Structures, vol.51, issue.4, pp.345-359, 2001.
DOI : 10.1016/S0263-8223(00)00150-1

G. Farley and R. Jones, Crushing Characteristics of Continuous Fiber-Reinforced Composite Tubes, Journal of Composite Materials, vol.17, issue.1, pp.37-50, 1992.
DOI : 10.1177/002199839002400104

D. Hull, A unified approach to progressive crushing of fibre-reinforced composite tubes, Composites Science and Technology, vol.40, issue.4, pp.377-421, 1991.
DOI : 10.1016/0266-3538(91)90031-J

P. Qiao, J. Davalos, and E. Barbero, Design Optimization of Fiber Reinforced Plastic Composite Shapes, Journal of Composite Materials, vol.27, issue.2, pp.177-196, 1998.
DOI : 10.1177/002199839302700804
URL : http://www.mae.wvu.edu/~barbero/papers/1998/98%20Qiao%20Davalos%20Barbero,%20Design%20Optimization.pdf

P. Feraboli, Development of a Corrugated Test Specimen for Composite Materials Energy Absorption, Journal of Composite Materials, vol.66, issue.11, pp.229-256, 2008.
DOI : 10.1177/002199838902300502

D. Guillon, Etude des mécanismes dabsorption dénergie lors de lécrasement progressif de structures composites base de fibre de carbone, p.271, 2008.

G. Davies and R. Olsson, Impact on composite structures, The Aeronautical Journal, vol.108, issue.1089, pp.541-563, 2004.
DOI : 10.1017/S0001924000000385

M. Joosten, S. Dutton, D. Kelly, and R. Thomson, Experimental and numerical investigation of the crushing response of an open section composite energy absorbing element, Composite Structures, vol.93, issue.2, pp.682-689, 2011.
DOI : 10.1016/j.compstruct.2010.08.011

X. Xiao, Modeling Energy Absorption with a Damage Mechanics Based Composite Material Model, Journal of Composite Materials, vol.28, issue.5, pp.427-444, 2009.
DOI : 10.1016/j.compscitech.2005.05.001

M. Gregor, C. Vaziri, R. Poursartip, A. Xiao, and X. , Simulation of progressive damage development in braided composite tubes under axial compression, Composites A, vol.38, pp.2247-2259, 2007.

H. Israr, S. Rivallant, C. Bouvet, and J. Barrau, Finite element simulation of 0??/90?? CFRP laminated plates subjected to crushing using a free-face-crushing concept, Composites Part A: Applied Science and Manufacturing, vol.62, pp.16-25, 2014.
DOI : 10.1016/j.compositesa.2014.03.014
URL : https://hal.archives-ouvertes.fr/hal-00978464

H. Espinosa, P. Zavattieri, and S. Dwivedi, A finite deformation continuum\discrete model for the description of fragmentation and damage in brittle materials, Journal of the Mechanics and Physics of Solids, vol.46, issue.10, pp.1909-1942, 1998.
DOI : 10.1016/S0022-5096(98)00027-1

S. Guinard, O. Allix, D. Guedra-degeorges, and A. Vinet, A 3D damage analysis of low-velocity impacts on laminated composites, Composites Science and Technology, vol.62, issue.4, pp.585-589, 2002.
DOI : 10.1016/S0266-3538(01)00153-1
URL : https://hal.archives-ouvertes.fr/hal-01745214

G. Liu and M. Liu, Smoothed Particle hydrodynamics: a meshfree particle method, p.9812384561, 2003.
DOI : 10.1142/5340
URL : http://www.worldscientific.com/doi/pdf/10.1142/9789812564405_fmatter

J. Limido, C. Espinosa, M. Salan, and J. Lacome, A new approach of high speed cutting modelling: SPH method, Journal de Physique IV (Proceedings), vol.134, issue.4, pp.1195-1200, 2006.
DOI : 10.1051/jp4:2006134182

J. Lacome, J. Limido, and C. Espinosa, SPH formulation with Lagrangian Eulerian adaptive kernel, p.4, 2009.

Y. Michel, C. J. Durin, C. Espinosa, C. Malaise, F. Barrau et al., Hypervelocity impacts on thin brittle targets: Experimental data and SPH simulations, International Journal of Impact Engineering, vol.33, issue.1-12, pp.441-451, 2006.
DOI : 10.1016/j.ijimpeng.2006.09.081
URL : http://oatao.univ-toulouse.fr/2385/1/Espinosa_2385.pdf

G. Johnson, S. Beissel, and R. Stryk, A generalized particle algorithm for high velocity impact computations, Computational Mechanics, vol.25, issue.2-3, pp.245-256, 2000.
DOI : 10.1007/s004660050473

G. Johnson, Numerical algorithms and material models for high-velocity impact computations, International Journal of Impact Engineering, vol.38, issue.6, pp.456-472, 2011.
DOI : 10.1016/j.ijimpeng.2010.10.017

G. Johnson, S. Beissel, and C. Gerlach, A combined particleelement method for high-velocity impact computations, Proceedings of the 12th hypervelocity impact symposium on procedia engineering, 2013.
DOI : 10.1016/j.proeng.2013.05.031
URL : https://doi.org/10.1016/j.proeng.2013.05.031

G. Johnson, Another approach to a hybrid particle-finite element algorithm for high-velocity impact, International Journal of Impact Engineering, vol.38, issue.5, pp.456-472, 2011.
DOI : 10.1016/j.ijimpeng.2011.01.002

D. Sulsky, Z. Chen, and L. Schreyer, A particle method for historydependent materials, Comput Methods Appl Mech Eng, vol.18, pp.179-196, 1994.

D. Sulsky, S. Zhou, and H. Schreyer, Application of a particle-in-cell method to solid mechanics, Computer Physics Communications, vol.87, issue.1-2, pp.236-252, 1995.
DOI : 10.1016/0010-4655(94)00170-7

D. Sulsky and L. Schreyer, MPM simulation of dynamic material failure with a decohesion constitutive model, European Journal of Mechanics - A/Solids, vol.23, issue.3, pp.423-445, 2004.
DOI : 10.1016/j.euromechsol.2004.02.007

Z. Chen and R. Brannon, An evaluation of the Material Point Method, pp.2002-0482, 2002.
DOI : 10.2172/793336

S. Ma, X. Zhang, and X. Qiu, Comparison study of MPM and SPH in modeling hypervelocity impact problems, International Journal of Impact Engineering, vol.36, issue.2, pp.272-282, 2009.
DOI : 10.1016/j.ijimpeng.2008.07.001

S. Bardenhagen, J. Brackbill, and D. Sulsky, The material-point method for granular materials, Computer Methods in Applied Mechanics and Engineering, vol.187, issue.3-4, pp.529-541, 2000.
DOI : 10.1016/S0045-7825(99)00338-2
URL : http://www.math.unm.edu/~sulsky/papers/CMAME.pdf

A. Stomakhin, C. Schroeder, L. Chai, J. Teran, and S. A. , A material point method for snow simulation, ACM Transactions on Graphics, vol.32, issue.4, 2013.
DOI : 10.1145/2461912.2461948
URL : http://hydra.math.ucla.edu/~craig/papers/2013-mpm-snow/paper.pdf

Z. Wieckowski, The material point method in large strain engineering problems, Computer Methods in Applied Mechanics and Engineering, vol.193, issue.39-41, pp.4417-4438, 2004.
DOI : 10.1016/j.cma.2004.01.035

S. Andersen, Material-Point Analysis of Large- Strain Problems: Modelling of Landsildes, 2009.

I. Al-kafaji, Formulation of a Dynamic Material Point Method (MPM) for Geomechanical Problems, D93 Dr, Ing. Dissertation, 2013.

R. Ambati, X. Pan, H. Yuan, and X. Zhang, Application of material point methods for cutting process simulations, Computational Materials Science, vol.57, pp.102-110, 2012.
DOI : 10.1016/j.commatsci.2011.06.018

J. Limido, C. Espinosa, M. Salan, C. Mabru, R. Chieragatti et al., Metal cutting modelling SPH approach, International Journal of Machining and Machinability of Materials, vol.9, issue.3/4, pp.177-196, 2011.
DOI : 10.1504/IJMMM.2011.039645

H. Schreyer, D. Sulsky, and S. Zhou, Modeling delamination as a strong discontinuity with the material point method, Computer Methods in Applied Mechanics and Engineering, vol.191, issue.23-24, pp.2483-2507, 2002.
DOI : 10.1016/S0045-7825(01)00409-1

J. Nairn, Material point method calculations with explicit cracks, Comput Model Eng Sci, vol.4, issue.6, pp.649-663, 2003.

J. Nairn, Analytical and numerical modeling of R curves for cracks with bridging zones, International Journal of Fracture, vol.72, issue.8, pp.167-181, 2009.
DOI : 10.1115/1.3601206
URL : http://www.cof.orst.edu/cof/wse/faculty/Nairn/papers/JBridging.pdf

Y. Guo and J. Nairn, Three-dimensional dynamic fracture analysis using the material point method, Comput Model Eng Sci, vol.1, issue.1, pp.11-25, 2006.

F. Li, J. Pan, and C. Sinka, Modelling brittle impact failure of disc particles using material point method, International Journal of Impact Engineering, vol.38, issue.7, pp.653-660, 2011.
DOI : 10.1016/j.ijimpeng.2011.02.004
URL : https://hal.archives-ouvertes.fr/hal-00820518/document

I. Babuska, U. Banerjee, J. Osborn, and Q. Zhang, Effect of numerical integration on meshless methods, Computer Methods in Applied Mechanics and Engineering, vol.198, issue.37-40, pp.2886-2897, 2009.
DOI : 10.1016/j.cma.2009.04.008

B. Banerjee, Material point method simulations of fragmenting cylinders, 17th ASCE engineering mechanics conference, 2004.

B. Banerjee, J. Guilkey, T. Harman, J. Schmidt, and P. Mcmurtry, Simulation of impact and fragmentation with the material point method, computational physics, 11th international conference on fracture 2005, 2009.

T. Borvik, L. Olovsson, A. Hanssen, K. Dharmasena, H. Hansson et al., A discrete particle approach to simulate the combined effect of blast and sand impact loading of steel plates, Journal of the Mechanics and Physics of Solids, vol.59, issue.5, pp.940-958, 2011.
DOI : 10.1016/j.jmps.2011.03.004

H. Wadley, T. Borvik, L. Olovsson, J. Wetzel, K. Dharmasena et al., Deformation and fracture of impulsively loaded sandwich panels, Journal of the Mechanics and Physics of Solids, vol.61, issue.2, pp.674-699, 2013.
DOI : 10.1016/j.jmps.2012.07.007
URL : https://dash.harvard.edu/bitstream/handle/1/10169555/Wadley_DeformationFracture.pdf?sequence=1

Z. Hashin, Failure Criteria for Unidirectional Fiber Composites, Journal of Applied Mechanics, vol.47, issue.2, pp.329-334, 1980.
DOI : 10.1115/1.3153664

C. Davila, P. Camanho, and C. Rose, Failure Criteria for FRP Laminates, Journal of Composite Materials, vol.39, issue.4, pp.323-345, 2005.
DOI : 10.2514/3.10255

J. Brewer, A. Matzenmiller, J. Lubliner, and T. Taylor, Failure of graphite/epoxy induced by delamination , PhD Massachusetts Institute of Technology, Cambridge 48 A constitutive model for anisotropic damage in fiber-composites, Mech Mater, vol.20, issue.2, pp.125-152, 1988.

J. Xiao, B. Gama, J. Gillespie, and . Jr, Progressive damage and delamination in plain weave S-2 glass/SC-15 composites under quasi-static punch-shear loading, Composite Structures, vol.78, issue.2, pp.182-196, 2007.
DOI : 10.1016/j.compstruct.2005.09.001

M. Ilyas, Damage modeling of carbon epoxy laminated composites submitted to impact loading, 2010.

M. Ilyas, C. Espinosa, F. Lachaud, L. Michel, and M. Salan, Modeling aeronautical composite laminates behavior under impact using a saturation damage and delamination continuous material model, Key Eng Mater, vol.452453, pp.639-672, 2011.
DOI : 10.4028/www.scientific.net/kem.452-453.369
URL : http://oatao.univ-toulouse.fr/4267/1/Espinosa_4267.pdf

S. Didierjean, tude du comportement des matriaux composites carbone/poxy en environnement hygrothermique, 2004.

L. Michel, S. Garcia, Y. Chen, C. Espinosa, and F. Lachaud, Experimental and Numerical Investigation of Delamination in Curved-Beam Multidirectional Laminated Composite Specimen, Key Engineering Materials, vol.577, issue.578, pp.577-578, 2013.
DOI : 10.4028/www.scientific.net/KEM.577-578.389

L. Olovsson, A. Hanssen, T. Borvik, and M. Langseth, A particlebased approach to close-range blast loading, Eur J Mech A, vol.29, 2010.
DOI : 10.1016/j.euromechsol.2009.06.003
URL : https://hal.archives-ouvertes.fr/hal-00509237

P. Cundall and O. Strack, A discrete numerical model for granular assemblies, G??otechnique, vol.29, issue.1, pp.47-65, 1979.
DOI : 10.1680/geot.1979.29.1.47

C. Salot, P. Gotteland, and P. Villard, Influence of relative density on granular materials behavior: DEM simulations of triaxial tests, Granular Matter, vol.8, issue.12, pp.221-236, 2009.
DOI : 10.1680/geot.1997.47.2.319

C. Chen, E. Ch, L. Michel, and F. Lachaud, A numerical approach for analyzing post-impact behavior of composite laminate plate under in plane compression, 15th European conference on composite materials, 2012.

E. Ch, L. Michel, and F. Lachaud, Modélisation numérique de linitiation et de la propagation des dommages lors du dépliage de cornières composites aéronautiques Comparaison des prévisions théoriques, NAFEMS Congres, 2012.

F. Lachaud, C. Espinosa, L. Michel, and M. Salan, Impacts on fuselages: a trial in using numerical simulation to predict residual strength. Workshop Dynamic failure of composites and sandwich structures Toulouse, 2011.
URL : https://hal.archives-ouvertes.fr/hal-02191639

F. Briche, Etude du comportement mécanique des matériaux composites stratifiés sous impact basse vitesse Application au fuselage de lA350, 2009.

P. Prombut, Caractérisation de la propagation de délaminage des stratifiés composites multidirectionnels, 2007.

S. Pinho, L. Iannucci, and P. Robinson, Formulation and implementation of decohesion elements in an explicit finite element code, Composites Part A: Applied Science and Manufacturing, vol.37, issue.5, pp.778-789, 2006.
DOI : 10.1016/j.compositesa.2005.06.007

M. Ilyas, E. Ch, F. Lachaud, and M. Salan, Dynamic delamination using cohesive finite elements, In: 9th international DYMAT conference, 2009.