E. Maire, On the Application of X-ray Microtomography in the Field of Materials Science, Advanced Engineering Materials, vol.3, issue.8, pp.539-546, 2001.
DOI : 10.1002/1527-2648(200108)3:8<539::AID-ADEM539>3.0.CO;2-6
URL : https://hal.archives-ouvertes.fr/hal-00475297

L. Salvo, P. Cloetens, E. Maire, S. Zabler, J. J. Blandin et al., X-ray micro-tomography an attractive characterisation technique in materials science. Nuclear instruments and methods in physics research section B: Beam interactions with materials and atoms, pp.273-286, 2003.
URL : https://hal.archives-ouvertes.fr/hal-00475146

J. Desrues, G. Viggiani, and P. Bésuelle, Advances in X-ray Tomography for Geomaterials, 2006.
DOI : 10.1002/9780470612187

L. Salvo, M. Suéry, A. Marmottant, N. Limodin, and D. Bernard, 3D imaging in material science: Application of X-ray tomography, Comptes Rendus Physique, vol.11, issue.9-10, pp.641-649, 2010.
DOI : 10.1016/j.crhy.2010.12.003
URL : https://hal.archives-ouvertes.fr/hal-00569350

E. Maire, C. Le-bourlot, J. Adrien, A. Mortensen, and R. Mokso, 20??Hz X-ray tomography during an in situ tensile test, International Journal of Fracture, vol.101, issue.9, pp.3-12, 2016.
DOI : 10.1088/1742-6596/463/1/012025
URL : https://hal.archives-ouvertes.fr/hal-01538199

J. Desrues, R. Chambon, M. Mokni, and F. Mazerolle, Void ratio evolution inside shear bands in triaxial sand specimens studied by computed tomography, G??otechnique, vol.46, issue.3, pp.529-546, 1996.
DOI : 10.1680/geot.1996.46.3.529

A. Guvenilir, T. M. Breunig, J. H. Kinney, and S. R. Stock, Direct observation of crack opening as a function of applied load in the interior of a notched tensile sample of Al???Li 2090, Acta Materialia, vol.45, issue.5, pp.451977-1987, 1997.
DOI : 10.1016/S1359-6454(96)00311-4

F. Beckmann, R. Grupp, A. Haibel, M. Huppmann, M. Nöthe et al., -Situ Synchrotron X-Ray Microtomography Studies of Microstructure and Damage Evolution in Engineering Materials, pp.9939-950, 2007.

E. Maire and P. J. Withers, Quantitative X-ray tomography, International Materials Reviews, vol.42, issue.3, pp.1-43, 2014.
DOI : 10.1016/j.jnucmat.2011.03.051
URL : https://hal.archives-ouvertes.fr/hal-01538208

M. Mostafavi, D. M. Collins, B. Cai, R. Bradley, R. C. Atwood et al., Yield behavior beneath hardness indentations in ductile metals, measured by three-dimensional computed X-ray tomography and digital volume correlation, Acta Materialia, vol.82, pp.468-482, 2015.
DOI : 10.1016/j.actamat.2014.08.046

B. Rahmani, E. Ghossein, I. Villemure, and M. Levesque, In-situ mechanical properties identification of 3D particulate composites using the Virtual Fields Method, International Journal of Solids and Structures, vol.51, issue.18, pp.513076-3086, 2014.
DOI : 10.1016/j.ijsolstr.2014.05.006

A. Bouterf, J. Adrien, E. Maire, X. Brajer, F. Hild et al., Failure Mechanisms of Plasterboard in Nail Pull Test Determined by X-ray Microtomography and Digital Volume Correlation, Experimental Mechanics, vol.50, issue.5, pp.1427-1437, 2016.
DOI : 10.1111/str.12101
URL : https://hal.archives-ouvertes.fr/hal-01383905

F. Hild, A. Bouterf, L. Chamoin, H. Leclerc, F. Mathieu et al., Z. Tomi?evi?, and S. Roux. Toward 4D Mechanical Correlation. Advanced Modeling and Simulation in Engineering Sciences, vol.3, issue.1, p.26, 2016.

A. Buljac, V. Trejo-navas, M. Shakoor, A. Bouterf, J. Neggers et al., On the calibration of elastoplastic parameters at the microscale via X-ray microtomography and digital volume correlation for the simulation of ductile damage, European Journal of Mechanics - A/Solids, vol.72, pp.287-297, 2018.
DOI : 10.1016/j.euromechsol.2018.04.010
URL : https://hal.archives-ouvertes.fr/hal-01767392

H. Zhang, H. Toda, P. C. Qu, Y. Sakaguchi, M. Kobayashi et al., Three-dimensional fatigue crack growth behavior in an aluminum alloy investigated with in situ high-resolution synchrotron X-ray microtomography, Acta Materialia, vol.57, issue.11, pp.573287-3300, 2009.
DOI : 10.1016/j.actamat.2009.03.036

H. Toda, E. Maire, S. Yamauchi, H. Tsuruta, T. Hiramatsu et al., In situ observation of ductile fracture using X-ray tomography technique, Acta Materialia, vol.59, issue.5, pp.1995-2008, 2011.
DOI : 10.1016/j.actamat.2010.11.065
URL : https://hal.archives-ouvertes.fr/hal-01538235

H. Leclerc, S. Roux, and F. Hild, Projection Savings in CT-based Digital Volume Correlation, Experimental Mechanics, vol.47, issue.1, pp.275-287, 2015.
DOI : 10.1177/0309324712441435
URL : https://hal.archives-ouvertes.fr/hal-01166750

M. H. Khalili, S. Brisard, M. Bornert, P. Aimedieu, J. Pereira et al., Discrete Digital Projections Correlation: A Reconstruction-Free Method to Quantify Local Kinematics in Granular Media by X-ray Tomography, Experimental Mechanics, vol.13, issue.2, pp.1-12, 2017.
DOI : 10.1007/978-3-662-05088-0
URL : https://hal.archives-ouvertes.fr/hal-01474701

T. Taillandier-thomas, C. Jailin, S. Roux, and F. Hild, Measurement of 3D displacement fields from few tomographic projections, Proc. SPIE 9896, Optics, Photonics and Digital Technologies for Imaging Applications IV, volume 9896OL (DOI: 10.1117/12.2227904). International Society for Optics and Photonics, 2016.
URL : https://hal.archives-ouvertes.fr/hal-01800794

T. Taillandier-thomas, S. Roux, and F. Hild, Soft Route to 4D Tomography, Physical Review Letters, vol.4, issue.2, p.25501, 2016.
DOI : 10.1051/meca/2012025

C. Jailin, A. Bouterf, M. Poncelet, and S. Roux, In situ ?? CT-scan Mechanical Tests: Fast 4D Mechanical Identification, Experimental Mechanics, vol.43, issue.9, pp.1327-1340, 2017.
DOI : 10.1016/0956-7151(95)00036-U
URL : https://hal.archives-ouvertes.fr/hal-01576727

F. Chinesta, A. Ammar, and E. Cueto, Recent Advances and New Challenges in the Use of the Proper Generalized Decomposition for Solving Multidimensional Models, Archives of Computational Methods in Engineering, vol.190, issue.1, pp.327-350, 2010.
DOI : 10.1016/S0045-7825(01)00215-8
URL : https://hal.archives-ouvertes.fr/hal-01007235

P. Ladevèze, Nonlinear computational structural mechanics: new approaches and nonincremental methods of calculation, 2012.
DOI : 10.1007/978-1-4612-1432-8

M. Vitse, Model-order reduction for the parametric analysis of damage in reinforced concrete structures, 2016.
URL : https://hal.archives-ouvertes.fr/tel-01468261

J. C. Passieux and J. N. Périé, High resolution digital image correlation using proper generalized decomposition: PGD-DIC, International Journal for Numerical Methods in Engineering, vol.49, issue.2, pp.531-550, 2012.
DOI : 10.1007/978-1-4612-1432-8
URL : https://hal.archives-ouvertes.fr/hal-00708541

L. A. Gomes-perini, J. C. Passieux, and J. N. Périé, A Multigrid PGD-based Algorithm for Volumetric Displacement Fields Measurements, Strain, vol.46, issue.21, pp.355-367, 2014.
DOI : 10.1007/s00466-010-0496-y
URL : https://hal.archives-ouvertes.fr/hal-01015904

C. Jailin, A. Buljac, A. Bouterf, M. Poncelet, F. Hild et al., CT using space-time regularized projection-based DVC and model reduction, Measurement Science and Technology, vol.29, issue.2, p.24003, 2018.
DOI : 10.1088/1361-6501/aa9818

C. Jailin, M. Etxegarai, E. Tudisco, S. H. Hall, and S. Roux, Fast tracking of imbibition using time-resolved neutron tomography, 2017.

A. Buljac, C. Jailin, A. Mendoza, J. Neggers, T. Taillandier-thomas et al., Digital Volume Correlation: Review of Progress and Challenges, Experimental Mechanics, vol.21, issue.11, pp.661-708, 2018.
DOI : 10.1016/S0262-8856(03)00137-9
URL : https://hal.archives-ouvertes.fr/hal-01980039

H. Don and . Johnson, Signal-to-noise ratio, Scholarpedia, vol.1, issue.12, p.2088, 2006.

S. Roux, F. Hild, P. Viot, and D. Bernard, Three-dimensional image correlation from X-ray computed tomography of solid foam, Composites Part A: Applied Science and Manufacturing, vol.39, issue.8, pp.1253-1265, 2008.
DOI : 10.1016/j.compositesa.2007.11.011
URL : https://hal.archives-ouvertes.fr/hal-00198126

H. Leclerc, J. Périé, S. Roux, and F. Hild, Voxel-Scale Digital Volume Correlation, Experimental Mechanics, vol.22, issue.9, pp.479-490, 2011.
DOI : 10.1179/174328406X114135
URL : https://hal.archives-ouvertes.fr/hal-00521193

J. Lachambre, J. Réthoré, A. Weck, and J. Buffière, Extraction of stress intensity factors for 3D small fatigue cracks using digital volume correlation and X-ray tomography, International Journal of Fatigue, vol.71, pp.3-10, 2015.
DOI : 10.1016/j.ijfatigue.2014.03.022
URL : https://hal.archives-ouvertes.fr/hal-01537225

T. Taillandier-thomas, S. Roux, T. F. Morgeneyer, and F. Hild, Localized strain field measurement on laminography data with mechanical regularization. Nuclear Instruments and Methods in Physics Research Section B: Beam Interactions with, Materials and Atoms, vol.324, pp.70-79, 2014.
DOI : 10.1016/j.nimb.2013.09.033
URL : https://hal.archives-ouvertes.fr/hal-00956440

A. Bouterf, S. Roux, F. Hild, J. Adrien, E. Maire et al., Digital Volume Correlation Applied to X-ray Tomography Images from Spherical Indentation Tests on Lightweight Gypsum, Strain, vol.196, issue.2, pp.444-453, 2014.
DOI : 10.1016/j.cma.2007.06.019
URL : https://hal.archives-ouvertes.fr/hal-01068402

A. Nouy, A priori model reduction through Proper Generalized Decomposition for solving time-dependent partial differential equations, Computer Methods in Applied Mechanics and Engineering, vol.199, issue.23-24, pp.1991603-1626, 2010.
DOI : 10.1016/j.cma.2010.01.009
URL : https://hal.archives-ouvertes.fr/hal-00455635

T. H. Cormen, Introduction to algorithms, 2009.

G. Besnard, S. Guérard, S. Roux, and F. Hild, A space???time approach in digital image correlation: Movie-DIC, Optics and Lasers in Engineering, vol.49, issue.1, pp.71-81, 2011.
DOI : 10.1016/j.optlaseng.2010.08.012
URL : https://hal.archives-ouvertes.fr/hal-00521203

G. Besnard, H. Leclerc, F. Hild, S. Roux, and N. Swiergiel, Analysis of image series through global digital image correlation, The Journal of Strain Analysis for Engineering Design, vol.13, issue.4, pp.214-228, 2012.
DOI : 10.1007/s11340-008-9148-y
URL : https://hal.archives-ouvertes.fr/hal-00694332

Z. Tomi?evi?, J. Kodvanj, and F. Hild, Characterization of the nonlinear behavior of nodular graphite cast??iron via inverse identification???Analysis of uniaxial tests, European Journal of Mechanics - A/Solids, vol.59, pp.140-154, 2016.
DOI : 10.1016/j.euromechsol.2016.02.010

J. Buffière, E. Maire, J. Adrien, J. Masse, and E. Boller, In Situ Experiments with X ray Tomography: an Attractive Tool for Experimental Mechanics, Experimental Mechanics, vol.17, issue.2, pp.289-305, 2010.
DOI : 10.1016/j.crme.2008.06.006

G. T. Herman, Correction for beam hardening in computed tomography, Physics in Medicine and Biology, vol.24, issue.1, p.81, 1979.
DOI : 10.1088/0031-9155/24/1/008

W. Van-aarle, W. J. Palenstijn, J. De-beenhouwer, T. Altantzis, S. Bals et al., The ASTRA Toolbox: A platform for advanced algorithm development in electron tomography, Ultramicroscopy, vol.157, pp.35-47, 2015.
DOI : 10.1016/j.ultramic.2015.05.002

L. A. Feldkamp, L. C. Davis, and J. W. Kress, Practical cone-beam algorithm, Journal of the Optical Society of America A, vol.1, issue.6, pp.612-619, 1984.
DOI : 10.1364/JOSAA.1.000612
URL : http://www.engineering.uiowa.edu/~mchen/reconstruction/practical feldkamp.pdf

C. Jailin, A. Buljac, A. Bouterf, F. Hild, and S. Roux, Fast 4D tensile test monitored via X-CT: Elastoplastic identification from radiographs

M. Grédiac and F. Hild, Full-Field Measurements and Identification in Solid Mechanics, p.2012
DOI : 10.1002/9781118578469