A. Ashfak, K. A. Rasheed, and J. A. Jaleel, Modeling, simulation and experimental validation of Magneto-Rheological damper, International Conference on Advanced Nanomaterials & Emerging Engineering Technologies, pp.267-274, 2013.
DOI : 10.1109/ICANMEET.2013.6609289

S. Aubouet, Modélisation et commande de suspensions semiactives soben, 2010.

A. R. Bhise, R. G. Desai, M. R. Yerrawar, A. Mitra, and R. Arakerimath, Comparison Between Passive And Semi-Active Suspension System Using Matlab/Simulink, IOSR Journal of Mechanical and Civil Engineering, vol.13, issue.04, pp.1-6, 2016.
DOI : 10.9790/1684-1304010106

E. C. Bingham, Rheology. I. The nature of fluid flow, Journal of Chemical Education, vol.6, issue.6, p.1113, 1929.
DOI : 10.1021/ed006p1113

R. B. Bird, G. Dai, and B. J. Yarusso, The Rheology and Flow of Viscoplastic Materials, Reviews in Chemical Engineering, vol.1, issue.1, pp.1-70, 1983.
DOI : 10.1515/revce-1983-0102

R. Bonnecaze and J. Brady, Dynamic simulation of an electrorheological fluid, The Journal of Chemical Physics, vol.96, issue.3, pp.2183-2202, 1992.
DOI : 10.1021/la00091a003

S. Choi, Y. Choi, E. Chang, S. Han, and C. Kim, Control characteristics of a continuously variable ER damper, Mechatronics, vol.8, issue.2, pp.143-161, 1998.
DOI : 10.1016/S0957-4158(97)00019-6

S. Choi, H. Lee, and E. Chang, Field test results of a semi-active ER suspension system associated with skyhook controller, Mechatronics, vol.11, issue.3, pp.345-353, 2001.
DOI : 10.1016/S0957-4158(00)00022-2

S. Choi and S. Han, H??? control of electrorheological suspension system subjected to parameter uncertainties, Mechatronics, vol.13, issue.7, pp.639-657, 2003.
DOI : 10.1016/S0957-4158(02)00035-1

S. Choi and Y. Han, Vibration control of electrorheological seat suspension with human-body model using sliding mode control, Journal of Sound and Vibration, vol.303, issue.1-2, pp.391-404, 2007.
DOI : 10.1016/j.jsv.2007.01.027

S. Choi, S. Lee, and Y. Park, A HYSTERESIS MODEL FOR THE FIELD-DEPENDENT DAMPING FORCE OF A MAGNETORHEOLOGICAL DAMPER, Journal of Sound and Vibration, vol.245, issue.2, pp.375-383, 2001.
DOI : 10.1006/jsvi.2000.3539

J. De, J. Lozoya-santos, R. Morales-menendez, R. Ramirez-mendoza, J. C. Tudon-martinez et al., Magnetorheological damperan experimental study, pp.1213-1232, 2012.

J. Dominy and D. Bulman, An Active Suspension for a Formula One Grand Prix Racing Car, Journal of Dynamic Systems, Measurement, and Control, vol.107, issue.1, pp.73-79, 1985.
DOI : 10.1115/1.3140710

S. Dyke, B. Spencer-jr, M. Sain, and J. Carlson, Modeling and control of magnetorheological dampers for seismic response reduction, Smart Materials and Structures, vol.5, issue.5, p.565, 1996.
DOI : 10.1088/0964-1726/5/5/006

R. Ehrgott and S. Masri, Structural control applications of an electrorheological device, Proc., Int. Workshop on Struct. Control, USC Publ. No. CE-9311, pp.115-129, 1994.

D. Gamota and F. Filisko, Dynamic mechanical studies of electrorheological materials: Moderate frequencies, Journal of Rheology, vol.35, issue.3, pp.399-425, 1991.
DOI : 10.1122/1.550221

L. Gaul and R. Nitsche, FRICTION CONTROL FOR VIBRATION SUPPRESSION, Mechanical Systems and Signal Processing, vol.14, issue.2, pp.139-150, 2000.
DOI : 10.1006/mssp.1999.1285

H. P. Gavin, Multi-Duct ER Dampers, Journal of Intelligent Material Systems and Structures, vol.12, issue.5, pp.353-366, 2001.
DOI : 10.1106/9UYN-Y1V9-013F-Y28L

T. D. Gillespie, Vehicle dynamics, 1997.

D. Hernández-alcántara, J. C. Tudón-martínez, L. Amézquita-brooks, C. A. Vivas-lópez, and R. Morales-menéndez, Modeling, diagnosis and estimation of actuator faults in vehicle suspensions, Control Engineering Practice, vol.49, pp.173-186
DOI : 10.1016/j.conengprac.2015.12.002

T. C. Jordan and M. T. Shaw, Electrorheology, IEEE Transactions on Electrical Insulation, vol.24, issue.5, pp.849-878, 1989.
DOI : 10.1109/14.42162

Y. Kakinuma, T. Yakoh, T. Aoyama, H. Anzai, and K. Isobe, Development of gel-structured electro-rheological fluids and their application to mechanical damper elements, The 8th IEEE International Workshop on Advanced Motion Control, 2004. AMC '04., pp.541-545, 2004.
DOI : 10.1109/AMC.2004.1297926

G. M. Kamath and N. M. Wereley, A nonlinear viscoelastic - plastic model for electrorheological fluids, Smart Materials and Structures, vol.6, issue.3, p.351, 1997.
DOI : 10.1088/0964-1726/6/3/012

M. Kamelreiter, W. Kemmetmüller, and A. Kugi, Digitally controlled electrorheological valves and their application in vehicle dampers, Mechatronics, vol.22, issue.5, pp.629-638, 2012.
DOI : 10.1016/j.mechatronics.2012.02.002

Y. Kim, R. Langari, and S. Hurlebaus, Semiactive nonlinear control of a building with a magnetorheological damper system, Mechanical Systems and Signal Processing, vol.23, issue.2, pp.300-315, 2009.
DOI : 10.1016/j.ymssp.2008.06.006

L. Ljung, System identification. In: Signal analysis and prediction, pp.163-173, 1998.
URL : https://hal.archives-ouvertes.fr/hal-00777543

N. Makris, S. A. Burton, and D. P. Taylor, Electrorheological damper with annular ducts for seismic protection applications, Smart Materials and Structures, vol.5, issue.5, p.551, 1996.
DOI : 10.1088/0964-1726/5/5/005

D. W. Marquardt, An Algorithm for Least-Squares Estimation of Nonlinear Parameters, Journal of the Society for Industrial and Applied Mathematics, vol.11, issue.2, pp.431-441, 1963.
DOI : 10.1137/0111030

S. A. Martins and L. A. Aguirre, Sufficient conditions for rate-independent hysteresis in autoregressive identified models, Mechanical Systems and Signal Processing, vol.75, pp.607-617, 2016.
DOI : 10.1016/j.ymssp.2015.12.031

N. H. Mcclamroch and H. Gavin, Closed loop structural control using electrorheological dampers, Proceedings of 1995 American Control Conference, ACC'95, pp.4173-4177, 1995.
DOI : 10.1109/ACC.1995.532717

H. Metered, P. Bonello, and S. Oyadiji, The experimental identification of magnetorheological dampers and evaluation of their controllers. Mechanical systems and signal processing, pp.976-994, 2010.

T. Nakamura, N. Saga, and M. Nakazawa, Variable viscous control of a homogeneous ER fluid device considering its dynamic characteristics, Mechatronics, vol.14, issue.1, pp.55-68, 2004.
DOI : 10.1016/S0957-4158(02)00095-8

N. Mohamed, N. A. Mohd-nor, M. J. Mukhlis, and R. Z. , Compromising vehicle handling and passenger ride comfort using er-damper, Mechanics, vol.54, issue.4, pp.50-54, 2016.

C. A. Papadopoulos, Brakes and clutches using ER fluids, Mechatronics, vol.8, issue.7, pp.719-726, 1998.
DOI : 10.1016/S0957-4158(98)00026-9

D. Peel and W. Bullough, Prediction of Electro-Rheological Valve Performance in Steady Flow, Proceedings of the Institution of Mechanical Engineers, pp.253-266, 1994.
DOI : 10.1017/CBO9780511666346

D. Purdy and D. Bulman, An experimental and theoretical investigation into the design of an active suspension system for a racing car, Proceedings of the Institution of Mechanical Engineers, pp.161-173, 1997.
DOI : 10.1115/1.2896426

M. S. Reineh and M. Pelosi, Physical modeling and simulation analysis of an advanced automotive racing shock absorber using the 1d simulation tool amesim, SAE International Journal of Passenger Cars- Mechanical Systems, vol.6, pp.2013-2014, 2013.

D. Sammier, O. Sename, and L. Dugard, Skyhook and H8 Control of Semi-active Suspensions: Some Practical Aspects, Vehicle System Dynamics, vol.39, issue.4, pp.279-308, 2003.
DOI : 10.1076/vesd.39.4.279.14149

S. M. Savaresi, C. Poussot-vassal, C. Spelta, O. Sename, and L. Dugard, Semi-active suspension control design for vehicles, 2010.
URL : https://hal.archives-ouvertes.fr/hal-00537826

S. Jr, B. Dyke, S. Sain, M. Carlson, and J. , Phenomenological model for magnetorheological dampers, Journal of engineering mechanics, vol.123, issue.3, pp.230-238, 1997.

R. Stanway, J. Sproston, and N. Stevens, Non-linear identification of an electrorheological vibration damper, In: IFAC Identification and System Parameter Estimation, vol.7, pp.195-200, 1985.

R. Stanway, J. Sproston, and N. Stevens, Non-linear modelling of an electro-rheological vibration damper, Journal of Electrostatics, vol.20, issue.2, pp.167-184, 1987.
DOI : 10.1016/0304-3886(87)90056-8

W. Sun, J. Li, Y. Zhao, and H. Gao, Vibration control for active seat suspension systems via dynamic output feedback with limited frequency characteristic, Mechatronics, vol.21, issue.1, pp.250-260, 2011.
DOI : 10.1016/j.mechatronics.2010.11.001

C. Vivas-lopez, D. H. Alcántara, M. Q. Nguyen, S. Fergani, G. Buche et al., INOVE: Integrated approach for observation and control of vehicle dynamics, 2010.

C. Vivas-lopez, D. H. Alcántara, M. Q. Nguyen, S. Fergani, G. Buche et al., INOVE: a testbench for the analysis and control of automotive vertical dynamics, 14th International Conference on Vehicle System Dynamics, Identification and Anomalies, 2014.
URL : https://hal.archives-ouvertes.fr/hal-01226502

M. Witters and J. Swevers, Black-box model identification for a continuously variable, electro-hydraulic semi-active damper, Mechanical Systems and Signal Processing, vol.24, issue.1, pp.4-18, 2010.
DOI : 10.1016/j.ymssp.2009.03.013

T. Yakoh and T. Aoyama, Application of electro-rheological fluids to flexible mount and damper devices, 2000 26th Annual Conference of the IEEE Industrial Electronics Society. IECON 2000. 2000 IEEE International Conference on Industrial Electronics, Control and Instrumentation. 21st Century Technologies and Industrial Opportunities (Cat. No.00CH37141), pp.1815-1820, 2000.
DOI : 10.1109/IECON.2000.972551