S. Larsson, A. Johan, and . Kjellander, Path planning for laser scanning with an industrial robot, Robotics and Autonomous Systems, vol.56, issue.7, pp.615-624, 2008.
DOI : 10.1016/j.robot.2007.10.006

A. Bernard and M. Véron, Visibility theory applied to automatic control of 3D complex parts using plane laser sensors, CIRP Annals-Manufacturing Technology, pp.113-118, 2000.

F. Xi and C. Shu, CAD-based path planning for 3-D line laser scanning, Computer-Aided Design, vol.31, issue.7, pp.31-473, 1999.
DOI : 10.1016/S0010-4485(99)00044-5
URL : http://www.scs.carleton.ca/~c_shu/Publications/scanpath_cad99.pdf

H. Elmaraghy and X. Yang, Computer-aided planning of laser scanning of complex geometries , CIRP Annals-Manufacturing Technology, pp.411-414, 2003.

W. Derigent, E. Chapotot, G. Ris, S. Remy, and A. Bernard, 3D Digitizing Strategy Planning Approach Based on a CAD Model, Journal of Computing and Information Science in Engineering, vol.32, issue.1, pp.10-19, 2007.
DOI : 10.1016/S0010-4485(99)00103-7

K. Lee and H. Park, Automated inspection planning of free-form shape parts by laser scanning, Robotics and Computer-Integrated Manufacturing, pp.201-210, 2000.
DOI : 10.1016/s0736-5845(99)00060-5

F. Prieto, H. Redarce, R. Lepage, and P. Boulanger, Range image accuracy improvement by acquisition planning, Proceedings of the 12th conference on vision interface (VI99), Trois Rivieres, pp.18-21, 1999.

Y. Quinsat and L. Sabourin, Optimal selection of machining direction for three-axis milling of sculptured parts, International Journal of Advanced Manufacturing Technologie, vol.27, pp.1-12, 2006.
DOI : 10.1007/s00170-006-0515-5
URL : https://hal.archives-ouvertes.fr/hal-01154044

M. Mahmud, D. Joannic, M. Roy, A. Isheil, and J. Fontaine, 3D part inspection path planning of a laser scanner with control on the uncertainty, Computer-Aided Design, vol.43, issue.4, pp.345-355, 2011.
DOI : 10.1016/j.cad.2010.12.014
URL : https://hal.archives-ouvertes.fr/hal-00786785

C. Yang and F. Ciarallo, Optimized sensor placement for active visual inspection, Journal of Robotic Systems, vol.19, issue.1, pp.1-15, 2001.
DOI : 10.1016/S0167-8655(98)00006-3
URL : http://onlinelibrary.wiley.com/doi/10.1002/1097-4563(200101)18:1<1::AID-ROB1>3.0.CO;2-O/pdf

C. Lartigue, Y. Quinsat, C. Mehdi-souzani, A. Zuquete-guaratoand, and S. Tabibian, Voxel-based Path Planning for 3D Scanning of Mechanical Parts, Computer-Aided Design and Applications, vol.15, issue.2, pp.220-227, 2014.
DOI : 10.1016/S0010-4485(99)00044-5
URL : https://hal.archives-ouvertes.fr/hal-01092685

R. Martins, G. Garca-bermejo, Z. Casanova, and R. P. Gonzalez, , pp.15-837, 2005.

S. Son, H. Park, and K. Lee, Automated laser scanning system for reverse engineering and inspection, International Journal of Machine Tools and Manufacture, vol.42, issue.8, pp.889-897, 2002.
DOI : 10.1016/S0890-6955(02)00030-5

A. Mavrinac, X. Chen, and J. Alarcon-herrera, Semiautomatic Model-Based View Planning for Active Triangulation 3-D Inspection Systems, IEEE/ASME Transactions on Mechatronics, vol.20, issue.2, pp.799-811, 2015.
DOI : 10.1109/TMECH.2014.2318729

R. Raffaeli, M. Mengoni, and M. Germani, Context Dependent Automatic View Planning: The Inspection of Mechanical Components, Computer-Aided Design and Applications, vol.31, issue.3, pp.111-127, 2013.
DOI : 10.1016/j.precisioneng.2008.10.002

Q. Wu, J. Lu, W. Zou, and D. Xu, Path planning for surface inspection on a robotbased scanning system, IEEE International Conference on Mechatronics and Automation (ICMA), pp.2284-2289, 2015.

T. Koutecky, D. Palousek, and J. Brandejs, Sensor planning system for fringe projection scanning of sheet metal parts, Measurement, vol.94, pp.60-70, 2016.
DOI : 10.1016/j.measurement.2016.07.067

C. Mineo, S. G. Pierce, P. I. Nicholson, and I. Cooper, Robotic path planning for non-destructive testing ??? A custom MATLAB toolbox approach, Robotics and Computer-Integrated Manufacturing, vol.37, pp.1-12, 2016.
DOI : 10.1016/j.rcim.2015.05.003

M. Andulkar, S. Chiddarwar, and A. Marathe, Novel integrated offline trajectory generation approach for robot assisted spray painting operation, Journal of Manufacturing Systems, vol.37, pp.201-216, 2015.
DOI : 10.1016/j.jmsy.2015.03.006

P. Atkar, D. Conner, A. Greenfield, H. Choset, and A. Rizzi, Uniform coverage of simple surfaces embedded in R3 for auto-body painting, pp.383-398, 2004.

C. Tournier and E. Duc, A Surface Based Approach for Constant Scallop HeightTool-Path Generation, The International Journal of Advanced Manufacturing Technology, vol.19, issue.5, pp.318-324, 2002.
DOI : 10.1007/s001700200019
URL : https://hal.archives-ouvertes.fr/hal-01076666/file/Tournier_Duc_IJAMT2001_Isoscallop3X.pdf

A. Can and A. Unuvar, A novel iso-scallop tool-path generation for efficient five-axis machining of free-form surfaces, The International Journal of Advanced Manufacturing Technology, vol.118, issue.7, pp.1083-1098, 2010.
DOI : 10.1007/978-3-642-59223-2

W. Li, Z. Yin, Y. Huang, T. Wu, and Y. Xiong, Tool path generation for triangular meshes using least-squares conformal map, International Journal of Production Research, vol.49, issue.12, pp.3653-3667, 2011.
DOI : 10.1007/s0017010180461

J. Zhao, Q. Zou, L. Li, and B. Zhou, Tool path planning based on conformal parameterization for meshes, Chinese Journal of Aeronautics, vol.28, issue.5, pp.1555-1563, 2015.
DOI : 10.1016/j.cja.2015.06.005
URL : https://doi.org/10.1016/j.cja.2015.06.005

S. Haker, S. Angenent, A. R. Tannerai, R. Kikinis, G. Sapiro et al., Conformal surface parameterization for texture mapping, IEEE Transactions on Visualization and Computer Graphics, vol.6, issue.2, pp.181-189, 2000.
DOI : 10.1109/2945.856998
URL : http://www.ima.umn.edu/preprints/apr99/1611.pdf

B. Lévy, S. Petitjean, N. Ray, and J. Maillot, Least squares conformal maps for automatic texture atlas generation, ACM Trans. Graph, vol.21, issue.3, pp.362-371, 2002.

K. Hormann, B. Lévy, and A. Sheffer, Mesh parameterization: Theory and practice, ACM SIGGRAPPH, course notes, 2007.
DOI : 10.1145/1508044.1508091
URL : https://hal.archives-ouvertes.fr/inria-00186795

C. Mehdi-souzani, Y. Quinsat, C. Lartigue, and P. Bourdet, A knowledge database of qualified digitizing systems for the selection of the best system according to the application, CIRP Journal of Manufacturing Science and Technology, vol.13, pp.15-23, 2016.
DOI : 10.1016/j.cirpj.2015.12.002
URL : https://hal.archives-ouvertes.fr/hal-01255312

M. Phan, Y. Quinsat, and C. Lartigue, Simulation of Laser-Sensor Digitizing for On-Machine Part Inspection, Advances on Mechanics, Design Engineering and Manufacturing, Part of the series Lecture Notes in Mechanical Engineering pp, pp.301-311, 2016.