G. Minke, Building with Earth: Design and Technology of a Sustainable Architecture, 2009.

F. Pacheco-torgal and S. Jalali, Earth construction: Lessons from the past for future eco-efficient construction, Construction and Building Materials, vol.29, 2012.
DOI : 10.1016/j.conbuildmat.2011.10.054

H. Danso, B. Martinson, M. Ali, and C. Mant, Performance characteristics of enhanced soil blocks: a quantitative review, Building Research & Information, vol.4, issue.2, 2015.
DOI : 10.1016/j.conbuildmat.2006.08.022

D. Samri, Analyse physique et caractérisation hygrothermique des matériaux de construction: approche expérimentale et modélisation numérique Ecole Nationale des Travaux Publics de l'Etat, 2008.

Y. A. Oumeziane, Evaluation des performances hygrothermiques d'une paroi par simulation numérique: application aux parois en béton de chanvre, INSA de Rennes, 2013.

F. Mcgregor, A. Heath, A. Shea, and M. Lawrence, The moisture buffering capacity of unfired clay masonry, Building and Environment, vol.82, pp.599-607, 2014.
DOI : 10.1016/j.buildenv.2014.09.027

H. Cagnon, J. E. Aubert, M. Coutand, and C. Magniont, Hygrothermal properties of earth bricks, Energy Build, pp.208-217, 2014.

P. Maillard and J. E. Aubert, Effects of the anisotropy of extruded earth bricks on their hygrothermal properties, Construction and Building Materials, vol.63, pp.56-61, 2014.
DOI : 10.1016/j.conbuildmat.2014.04.001

S. Liuzzi, M. R. Hall, P. Stefanizzi, and S. P. Casey, Hygrothermal behaviour and relative humidity buffering of unfired and hydrated lime-stabilised clay composites in a Mediterranean climate, Building and Environment, vol.61, pp.82-92, 2013.
DOI : 10.1016/j.buildenv.2012.12.006

D. Allinson and M. Hall, Hygrothermal analysis of a stabilised rammed earth test building in the UK, Energy Build, pp.845-852, 2010.

S. Goodhew and R. Griffiths, Sustainable earth walls to meet the building regulations, Energy Build, pp.451-459, 2005.

A. Bouguerra, A. Ledhem, F. De-barquin, R. M. Dheilly, and M. Queneudec, Effect of microstructure on the mechanical and thermal properties of lightweight concrete prepared from clay, cement, and wood aggregates, Cement and Concrete Research, vol.28, issue.8, pp.28-1179, 1998.
DOI : 10.1016/S0008-8846(98)00075-1

K. Rim, A. Ledhem, O. Douzane, R. M. Dheilly, and M. Queneudec, Influence of the proportion of wood on the thermal and mechanical performances of clay-cement-wood composites, Cement and Concrete Composites, vol.21, issue.4, pp.269-276, 1999.
DOI : 10.1016/S0958-9465(99)00008-6

A. Ledhem, R. M. Dheilly, M. L. Benmalek, and M. Quéneudec, Properties of wood-based composites formulated with aggregate industry waste, Construction and Building Materials, vol.14, issue.6-7, pp.341-350, 2000.
DOI : 10.1016/S0950-0618(00)00037-4

T. Ashour, H. Wieland, H. Georg, F. Bockisch, and W. Wu, The influence of natural reinforcement fibres on insulation values of earth plaster for straw bale buildings, Materials & Design, vol.31, issue.10, pp.4676-4685, 2010.
DOI : 10.1016/j.matdes.2010.05.026

T. Ashour, H. Georg, and W. Wu, An experimental investigation on equilibrium moisture content of earth plaster with natural reinforcement fibres for straw bale buildings, Applied Thermal Engineering, vol.31, issue.2-3, pp.293-303, 2011.
DOI : 10.1016/j.applthermaleng.2010.09.009

J. Pinto, A. Paiva, H. Varum, A. Costa, D. Cruz et al., Corn's cob as a potential ecological thermal insulation material, Energy Build, pp.43-1985, 2011.
DOI : 10.1016/j.enbuild.2011.04.004

P. Faria, T. Santos, and J. E. Aubert, Characterization of an earth plaster ? A contribution to the increased use of these eco-efficient plasters, J Mater Civ Eng

Y. Millogo, J. Morel, J. Aubert, and K. Ghavami, Experimental analysis of Pressed Adobe Blocks reinforced with Hibiscus cannabinus fibers, Construction and Building Materials, vol.52, 2014.
DOI : 10.1016/j.conbuildmat.2013.10.094

Y. Millogo, J. Aubert, E. Hamard, and J. Morel, How Properties of Kenaf Fibers from Burkina Faso Contribute to the Reinforcement of Earth Blocks, Materials, vol.14, issue.5, pp.2332-2345, 2015.
DOI : 10.1680/gein.4.0103
URL : https://hal.archives-ouvertes.fr/hal-01597452

J. Khedari, P. Watsanasathaporn, and J. Hirunlabh, Development of fibre-based soil???cement block with low thermal conductivity, Cement and Concrete Composites, vol.27, issue.1, pp.111-116, 2005.
DOI : 10.1016/j.cemconcomp.2004.02.042

H. Bal, Y. Jannot, S. Gaye, and F. Demeurie, Measurement and modelisation of the thermal conductivity of a wet composite porous medium: Laterite based bricks with millet waste additive, Construction and Building Materials, vol.41, pp.586-593, 2013.
DOI : 10.1016/j.conbuildmat.2012.12.032
URL : https://hal.archives-ouvertes.fr/hal-01430700

P. Meukam, A. Noumowe, Y. Jannot, and R. Duval, Thermophysical and mechanical characterization of stabilized clay bricks for building thermal insulation, Materials and Structures, vol.4, issue.2, pp.453-460, 2003.
DOI : 10.1016/0950-0618(90)90006-M

M. Maddison, T. Mauring, K. Kirsimäe, and Ü. Mander, The humidity buffer capacity of clay???sand plaster filled with phytomass from treatment wetlands, Building and Environment, vol.44, issue.9, 2009.
DOI : 10.1016/j.buildenv.2008.12.008

V. Cérézo, Propriétés mécaniques, thermiques et acoustiques d'un matériau à base de particules végétales: approche expérimentale et modélisation théorique, Ecole Nationale des Travaux Publics de l'Etat, 2005.

S. Roels and H. Janssen, A Comparison of the Nordtest and Japanese Test Methods for the, Moisture Buffering Performance of Building Materials, J. Build. Phys, vol.30, pp.137-161, 2006.

F. Mcgregor, A. Heath, E. Fodde, and A. Shea, Conditions affecting the moisture buffering measurement performed on compressed earth blocks, Building and Environment, vol.75, 2014.
DOI : 10.1016/j.buildenv.2014.01.009

S. Hameury, Moisture buffering capacity of heavy timber structures directly exposed to an indoor climate: a numerical study, Building and Environment, vol.40, issue.10, pp.1400-1412, 2005.
DOI : 10.1016/j.buildenv.2004.10.017

X. Yang, P. Fazio, H. Ge, and J. Rao, Evaluation of moisture buffering capacity of interior surface materials and furniture in a full-scale experimental investigation, Building and Environment, vol.47, 2012.
DOI : 10.1016/j.buildenv.2011.07.025

H. Zhang, H. Yoshino, and K. Hasegawa, Assessing the moisture buffering performance of hygroscopic material by using experimental method, Building and Environment, vol.48, pp.27-34, 2012.
DOI : 10.1016/j.buildenv.2011.08.012

M. Woloszyn, T. Kalamees, M. Olivier-abadie, M. Steeman, and A. Kalagasidis, The effect of combining a relative-humidity-sensitive ventilation system with the moisture-buffering capacity of materials on indoor climate and energy efficiency of buildings, Building and Environment, vol.44, issue.3, pp.515-524, 2009.
DOI : 10.1016/j.buildenv.2008.04.017
URL : https://hal.archives-ouvertes.fr/hal-00395970

Y. Li, P. Fazio, and J. Rao, An investigation of moisture buffering performance of wood paneling at room level and its buffering effect on a test room, Building and Environment, vol.47, 2012.
DOI : 10.1016/j.buildenv.2011.07.021

H. Janssen and S. Roels, Qualitative and quantitative assessment of interior moisture buffering by enclosures, Energy Build, pp.382-394, 2009.

X. Lu, Estimation of indoor moisture generation rate from measurement in buildings, Building and Environment, vol.38, issue.5, pp.665-675, 2003.
DOI : 10.1016/S0360-1323(02)00237-8

T. Kalamees, Indoor Humidity Loads and Moisture Production in Lightweight Timber-frame Detached Houses, Journal of Building Physics, vol.29, issue.3, pp.219-246, 2006.
DOI : 10.1520/MNL10152M

M. Rahim, O. Douzane, A. D. Tran-le, G. Promis, B. Laidoudi et al., Characterization of flax lime and hemp lime concretes: Hygric properties and moisture buffer capacity, Energy and Buildings, vol.88, pp.91-99, 2015.
DOI : 10.1016/j.enbuild.2014.11.043

N. M. Ramos, J. M. Delgado, and V. P. De-freitas, Influence of finishing coatings on hygroscopic moisture buffering in building elements, Construction and Building Materials, vol.24, issue.12, 2010.
DOI : 10.1016/j.conbuildmat.2010.05.017

M. Labat, M. Woloszyn, G. Garnier, and J. J. Roux, Dynamic coupling between vapour and heat transfer in wall assemblies: Analysis of measurements achieved under real climate, Building and Environment, vol.87, 2015.
DOI : 10.1016/j.buildenv.2015.01.022
URL : https://hal.archives-ouvertes.fr/hal-01236296

J. Carmeliet and D. Derome, Temperature driven inward vapor diffusion under constant and cyclic loading in small-scale wall assemblies: Part 2 heat-moisture transport simulations, Building and Environment, vol.47, 2012.
DOI : 10.1016/j.buildenv.2011.07.028

A. Piot, M. Woloszyn, J. Brau, and C. Abele, Experimental wooden frame house for the validation of whole building heat and moisture transfer numerical models, Energy Build, pp.1322-1328, 2011.

Y. Mualem, A conceptual model of hysteresis, Water Resources Research, vol.7, issue.4, pp.514-520, 1974.
DOI : 10.1029/WR007i004p00914

J. Carmeliet, M. De-wit, and H. Janssen, Hysteresis and moisture buffering of wood, Symp. Build. Phys. Nord. Ctries, pp.55-62, 2005.

J. Kwiatkowski, M. Woloszyn, and J. Roux, Modelling of hysteresis influence on mass transfer in building materials, Building and Environment, vol.44, issue.3, 2009.
DOI : 10.1016/j.buildenv.2008.05.006

Y. A. Oumeziane, M. Bart, S. Moissette, and C. Lanos, Hysteretic Behaviour and Moisture Buffering of Hemp Concrete, Transp. Porous Media, pp.515-533, 2014.

O. F. Osanyintola and C. J. Simonson, Moisture buffering capacity of hygroscopic building materials: Experimental facilities and energy impact, Energy and Buildings, vol.38, issue.10, pp.1270-1282, 2006.
DOI : 10.1016/j.enbuild.2006.03.026

T. Z. Desta, J. Langmans, and S. Roels, Experimental data set for validation of heat, air and moisture transport models of building envelopes, Building and Environment, vol.46, issue.5, pp.1038-1046, 2011.
DOI : 10.1016/j.buildenv.2010.11.002

N. En and . Iso, 12664 Thermal performance of building materials and products ? Determination of thermal resistance by means of guarded hot plate and heat flow meter methods ? Dry and moist products of medium and low thermal resistance, 2001.

T. M. Dinh, Contribution to the development of precast hempcrete using innovative pozzolanic binder, 2014.

N. En and . Iso, 12570 Hygrothermal performance of building materials and products -Measurement of the moisture content by the hot air heating method, 2000.

N. En and . Iso, 12571 Hygrothermal performance of building materials and products ? Determination of hygroscopic sorption properties, 2013.

N. En and . Iso, 12572 Hygrothermal performance of building materials and products ? Determination of water vapour transmission properties, 2001.

R. Walker and S. Pavía, Moisture transfer and thermal properties of hemp???lime concretes, Construction and Building Materials, vol.64, pp.270-276, 2014.
DOI : 10.1016/j.conbuildmat.2014.04.081

M. Jerman, M. Keppert, J. Výborný, and R. ?erný, Hygric, thermal and durability properties of autoclaved aerated concrete, Construction and Building Materials, vol.41, pp.41-352, 2013.
DOI : 10.1016/j.conbuildmat.2012.12.036

J. J. Del-coz-díaz, F. P. Álvarez-rabanal, P. J. García-nieto, J. Domínguez-hernández, B. R. Soria et al., Hygrothermal properties of lightweight concrete: Experiments and numerical fitting study, Construction and Building Materials, vol.40, pp.40-543, 2013.
DOI : 10.1016/j.conbuildmat.2012.11.045

F. Collet, J. Chamoin, S. Pretot, and C. Lanos, Comparison of the hygric behaviour of three hemp concretes, Energy Build, pp.294-303, 2013.

S. Roels, P. Talukdar, C. James, and C. J. Simonson, Reliability of material data measurements for hygroscopic buffering, International Journal of Heat and Mass Transfer, vol.53, issue.23-24, pp.5355-5363, 2010.
DOI : 10.1016/j.ijheatmasstransfer.2010.07.020

J. Chamoin, Optimisation des propriétés (physiques, mécaniques et hydriques) de bétons de chanvre par la maîtrise de la formulation, INSA de Rennes, 2013.

A. Evrard, Sorption behaviour of Lime-Hemp Concrete and its relation to indoor comfort and energy demand Passive Low Energy Archit, Proc. 23rd Conf, pp.53-57, 2006.

G. Scheffler, Hygric performance of internal insulation with light-weight autoclaved aerated concrete, 2011.

J. Laverge, X. Pattyn, and A. , Janssens, Performance assessment of residential mechanical exhaust ventilation systems dimensioned in accordance with Belgian, and ASHRAE standards, 2013.

A. S. Kalagasidis, P. Weitzmann, T. R. Nielsen, R. Peuhkuri, C. Hagentoft et al., The International Building Physics Toolbox in Simulink, Energy Build, pp.39-665, 2007.