M. Abadie, K. Olivier, and . Mendonça, Moisture performance of building materials: From material characterization to building simulation using the Moisture Buffer Value concept, Building and Environment, vol.44, issue.2, pp.388-401, 2009.
DOI : 10.1016/j.buildenv.2008.03.015
URL : https://hal.archives-ouvertes.fr/hal-00355066

F. Aerts, D. Minnen, I. Glorieux, I. Wouters, and F. Descamps, Discrete Occupancy Profiles from Time-Use Data for User Behavior Modeling in Homes, pp.2421-2448, 2013.

J. Carmeliet and D. Derome, Temperature driven inward vapor diffusion under constant and cyclic loading in small-scale wall assemblies: Part 1 experimental investigation, Building and Environment, vol.48, pp.48-56, 2012.
DOI : 10.1016/j.buildenv.2011.08.015

J. Carmeliet, M. D. Wit, and H. Janssen, Hysteresis and Moisture Buffering of Wood, Symposium of Building Physics in the Nordic Countries, pp.55-62, 2005.

S. P. Casey, M. R. Hall, S. C. Tsang, and M. A. Khan, Energetic and hygrothermal analysis of a nano-structured material for rapid-response humidity buffering in closed environments, Building and Environment, vol.60, pp.24-36, 2013.
DOI : 10.1016/j.buildenv.2012.11.007

T. Desta, J. Zerihun, S. Langmans, and . Roels, Experimental data set for validation of heat, air and moisture transport models of building envelopes, Building and Environment, vol.46, issue.5, pp.1038-1084, 2011.
DOI : 10.1016/j.buildenv.2010.11.002

R. Diasty, P. El, I. Fazio, and . Budaiwi, Modelling of indoor air humidity: the dynamic behaviour within an enclosure, Energy and Buildings, vol.19, issue.1, pp.61-73, 1992.
DOI : 10.1016/0378-7788(92)90036-G

R. Djebbar, D. Van-reenen, and M. K. Kumaran, Environmental Boundary Conditions for Long-Term Hygrothermal Calculations, Proceedings for Performance of Exterior Envelopes of Whole Buildings VIII: Integration of Building Envelopes, pp.2-7, 2001.

S. J. Emmerich, A. Persily, and S. Nabinger, Modeling Moisture in Residential Buildings with a Multizone IAQ Program Gaithersbur, MD: National Institute of Standards and Technology, 2002.

E. Standard and E. , Indoor Environmental Input Parameters for Design and Assessment of Energy Performance of Buildings Addressing Indoor Air Quality, Thermal Environment, Lighting and Acoustics. CEN, European Committee for Standardization, 2007.

H. Ge, X. Yang, P. Fazio, and J. Rao, Influence of moisture load profiles on moisture buffering potential and moisture residuals of three groups of hygroscopic materials, Building and Environment, vol.81, pp.162-71, 2014.
DOI : 10.1016/j.buildenv.2014.06.021

K. Ghali, O. Katanani, and M. , Modeling the effect of hygroscopic curtains on relative humidity for spaces air conditioned by DX split air conditioning system, Energy and Buildings, vol.43, issue.9, pp.2093-2100, 2011.
DOI : 10.1016/j.enbuild.2011.04.017

S. Hameury, Moisture buffering capacity of heavy timber structures directly exposed to an indoor climate: a numerical study, Building and Environment, vol.40, issue.10, pp.1400-1412, 2005.
DOI : 10.1016/j.buildenv.2004.10.017

H. Hens, Building Physics ? Heat, Air and Moisture, 2007.
DOI : 10.1002/9783433602379

A. Hukka and H. A. Viitanen, A mathematical model of mould growth on wooden material, Wood Science and Technology, vol.33, issue.6, pp.475-85, 1999.
DOI : 10.1007/s002260050131

T. Isaksson, S. Thelandersson, A. Ekstrand-tobin, and P. Johansson, Critical conditions for onset of mould growth under varying climate conditions, Building and Environment, vol.45, issue.7, pp.1712-1733, 2010.
DOI : 10.1016/j.buildenv.2010.01.023

C. Isetti, L. Laurenti, and A. Ponticello, Predicting vapour content of the indoor air and latent loads for air-conditioned environments: Effect of moisture storage capacity of the walls, Energy and Buildings, vol.12, issue.2, pp.141-189, 1988.
DOI : 10.1016/0378-7788(88)90076-X

H. Janssen and S. Roels, Qualitative and quantitative assessment of interior moisture buffering by enclosures, Energy and Buildings, vol.41, issue.4, pp.382-94, 2009.
DOI : 10.1016/j.enbuild.2008.11.007

A. Janssens and M. De-paepe, Effect of Moisture Inertia Models on the Predicted Indoor Humidity in a Room, Proceedings of the 26th AIVC Conference, pp.287-94, 2005.

P. Johansson, S. Pallin, and M. Shahriari, Risk Assessment Model Applied on Building Physics: Statistical Data Acquisition and Stochastic Modeling of Indoor Moisture Supply in Swedish Multi-Family Dwellings, IEA Annex 55 RAP-RETRO, 2010.

P. Johansson, A. Ekstrand-tobin, T. Svensson, and G. Bok, Laboratory study to determine the critical moisture level for mould growth on building materials, International Biodeterioration & Biodegradation, vol.73, pp.23-32, 2012.
DOI : 10.1016/j.ibiod.2012.05.014

A. Kalagasidis, P. Sasic, . Weitzmann, R. Toke-rammer-nielsen, C. Peuhkuri et al., The International Building Physics Toolbox in Simulink, Energy and Buildings, vol.39, issue.6, pp.665-74, 2007.
DOI : 10.1016/j.enbuild.2006.10.007

T. Kalamees, Indoor Humidity Loads and Moisture Production in Lightweight Timber-frame Detached Houses, Journal of Building Physics, vol.29, issue.3, pp.219-265, 2006.
DOI : 10.1520/MNL10152M

A. Karagiozis and M. Salonvaara, Hygrothermal system-performance of a whole building, Building and Environment, vol.36, issue.6, pp.779-87, 2001.
DOI : 10.1016/S0360-1323(00)00063-9

J. Kwiatkowski, M. Woloszyn, and J. Roux, Modelling of hysteresis influence on mass transfer in building materials, Building and Environment, vol.44, issue.3, pp.633-675, 2009.
DOI : 10.1016/j.buildenv.2008.05.006

M. Labat, M. Woloszyn, G. Garnier, A. Piot, and J. Roux, Simulation of Coupled Heat, Air and Moisture Transfers in an Experimental House Exposed to Natural Climate, Proceedings of BS2013: 13th Conference of International Building Performance Simulation Association, 2013.
URL : https://hal.archives-ouvertes.fr/hal-00985568

M. Labat, M. Woloszyn, G. Garnier, and J. J. Roux, Assessment of the air change rate of airtight buildings under natural conditions using the tracer gas technique. Comparison with numerical modelling, Building and Environment, vol.60, pp.37-44, 2013.
DOI : 10.1016/j.buildenv.2012.10.010
URL : https://hal.archives-ouvertes.fr/hal-00985227

M. Labat, M. Woloszyn, G. Garnier, and J. J. Roux, Dynamic coupling between vapour and heat transfer in wall assemblies: Analysis of measurements achieved under real climate, Building and Environment, vol.87, pp.129-170, 2015.
DOI : 10.1016/j.buildenv.2015.01.022
URL : https://hal.archives-ouvertes.fr/hal-01236296

M. Labat, M. Woloszyn, G. Garnier, G. Rusaouen, and J. J. Roux, Impact of direct solar irradiance on heat transfer behind an open-jointed ventilated cladding: Experimental and numerical investigations, Solar Energy, vol.86, issue.9, pp.2549-60, 2012.
DOI : 10.1016/j.solener.2012.05.030

E. Latif, M. Anca-ciupala, S. Tucker, D. Wijeyesekera, and . Newport, Hygrothermal performance of wood-hemp insulation in timber frame wall panels with and without a vapour barrier, Building and Environment, vol.92, pp.122-156, 2015.
DOI : 10.1016/j.buildenv.2015.04.025

J. Laverge, X. Pattyn, A. Janssens, and A. Standards, Performance assessment of residential mechanical exhaust ventilation systems dimensioned in accordance with Belgian, British, Dutch, French and ASHRAE standards, Building and Environment, vol.59, pp.177-86, 2013.
DOI : 10.1016/j.buildenv.2012.08.018

Y. Li, P. Fazio, and J. Rao, An investigation of moisture buffering performance of wood paneling at room level and its buffering effect on a test room, Building and Environment, vol.47, pp.205-221, 2012.
DOI : 10.1016/j.buildenv.2011.07.021

Y. Li and A. Delsante, Natural ventilation induced by combined wind and thermal forces, Building and Environment, vol.36, issue.1, pp.59-71, 2001.
DOI : 10.1016/S0360-1323(99)00070-0

X. Lu, Estimation of indoor moisture generation rate from measurement in buildings, Building and Environment, vol.38, issue.5, pp.665-75, 2003.
DOI : 10.1016/S0360-1323(02)00237-8

Y. Mualem, A conceptual model of hysteresis, Water Resources Research, vol.7, issue.4, pp.514-534, 1974.
DOI : 10.1029/WR007i004p00914

T. Ojanen, H. Viitanen, R. Peuhkuri, K. Lähdesmäki, J. Vinha et al., Mold Growth Modeling of Building Structures Using Sensitivity Classes of Materials, Proceedings Building XI, 2010.

J. A. Orosa and A. Baaliña, Improving PAQ and comfort conditions in Spanish office buildings with passive climate control, Building and Environment, vol.44, issue.3, 2009.
DOI : 10.1016/j.buildenv.2008.04.013

O. F. Osanyintola and C. J. Simonson, Moisture buffering capacity of hygroscopic building materials: Experimental facilities and energy impact, Energy and Buildings, vol.38, issue.10, pp.1270-82, 2006.
DOI : 10.1016/j.enbuild.2006.03.026

J. Page, D. Robinson, N. Morel, and J. Scartezzini, A generalised stochastic model for the simulation of occupant presence, Energy and Buildings, vol.40, issue.2, pp.83-98, 2008.
DOI : 10.1016/j.enbuild.2007.01.018

W. Parys, D. Saelens, and H. Hens, Coupling of dynamic building simulation with stochastic modelling of occupant behaviour in offices ??? a review-based integrated methodology, Journal of Building Performance Simulation, vol.4, issue.4, pp.339-58, 2011.
DOI : 10.1016/j.enbuild.2008.11.013

A. Piot, M. Woloszyn, J. Brau, and C. Abele, Experimental wooden frame house for the validation of whole building heat and moisture transfer numerical models, Energy and Buildings, vol.43, issue.6, pp.1322-1350, 2011.
DOI : 10.1016/j.enbuild.2011.01.008
URL : https://hal.archives-ouvertes.fr/hal-01025211

P. Plathner and M. Woloszyn, Interzonal air and moisture transport in a test house: experiment and modelling, Building and Environment, vol.37, issue.2, pp.189-99, 2002.
DOI : 10.1016/S0360-1323(00)00096-2

M. Qin, G. Walton, R. Belarbi, and F. Allard, Simulation of whole building coupled hygrothermal-airflow transfer in different climates, Energy Conversion and Management, vol.52, issue.2, pp.1470-78, 2011.
DOI : 10.1016/j.enconman.2010.10.010
URL : https://hal.archives-ouvertes.fr/hal-00548182

N. M. Ramos, J. M. Delgado, and V. P. De-freitas, Influence of finishing coatings on hygroscopic moisture buffering in building elements, Construction and Building Materials, vol.24, issue.12, pp.2590-97, 2010.
DOI : 10.1016/j.conbuildmat.2010.05.017

S. Roels and H. Janssen, A Comparison of the Nordtest and Japanese Test Methods for the Moisture Buffering Performance of Building Materials, Journal of Building Physics, vol.12, issue.2, pp.137-61, 2006.
DOI : 10.1177/1097196304044397

M. Salonvaara, A. Karagiozis, and . Holm, Stochastic Building Envelope modeling?The Influence of Material Properties, 2001.

C. J. Simonson, M. Salonvaara, and T. Ojanen, Moisture Content of Indoor Air and Structures in Buildings with Vapor Permeable Envelopes Performance of Exterior Envelopes of Whole Buildings VIII, p.141, 2001.

C. J. Simonson, M. Salonvaara, and T. Ojanen, The effect of structures on indoor humidity - possibility to improve comfort and perceived air quality, Indoor Air, vol.1, issue.4, pp.243-51, 2002.
DOI : 10.1111/j.1600-0668.1999.t01-1-00003.x

M. Steeman, A. Janssens, and M. De-paepe, Performance evaluation of indirect evaporative cooling using whole-building hygrothermal simulations, Applied Thermal Engineering, vol.29, issue.14-15, pp.14-15, 2009.
DOI : 10.1016/j.applthermaleng.2009.02.004
URL : https://hal.archives-ouvertes.fr/hal-00556849

A. Tenwolde and I. Walker, Interior Moisture Design Loads for Residences, Proc. Thermal Performance of Exterior Envelopes of Buildings VIII. ASHRAE, 2001.

J. Van-den-bulcke, I. De-windt, N. Defoirdt, J. D. Smet, and J. Van-acker, Moisture dynamics and fungal susceptibility of plywood, International Biodeterioration & Biodegradation, vol.65, issue.5, pp.708-724, 2011.
DOI : 10.1016/j.ibiod.2010.12.015

E. Vereecken and S. Roels, Review of mould prediction models and their influence on mould risk evaluation, Building and Environment, vol.51, pp.296-310, 2012.
DOI : 10.1016/j.buildenv.2011.11.003

E. Vereecken, S. Roels, and H. Janssen, In situ determination of the moisture buffer potential of room enclosures, Journal of Building Physics, vol.105, issue.3, pp.223-269, 2011.
DOI : 10.1177/1097196304044397

I. S. Walker and M. H. Sherman, Humidity Implications for Meeting Residential Ventilation Requirements, 2007.

P. Wolkoff and S. K. Kjaergaard, The dichotomy of relative humidity on indoor air quality, Environment International, vol.33, issue.6, pp.850-57, 2007.
DOI : 10.1016/j.envint.2007.04.004

M. Woloszyn, T. Kalamees, M. Olivier-abadie, M. Steeman, and A. S. Kalagasidis, The effect of combining a relative-humidity-sensitive ventilation system with the moisture-buffering capacity of materials on indoor climate and energy efficiency of buildings, Building and Environment, vol.44, issue.3, pp.515-539, 2009.
DOI : 10.1016/j.buildenv.2008.04.017
URL : https://hal.archives-ouvertes.fr/hal-00395970

M. Woloszyn and C. Rode, Tools for performance simulation of heat, air and moisture conditions of whole buildings, Building Simulation, vol.2, issue.112, pp.5-24, 2008.
DOI : 10.1002/bapi.200710028
URL : https://hal.archives-ouvertes.fr/hal-00353433

X. Yang, P. Fazio, H. Ge, and J. Rao, Evaluation of moisture buffering capacity of interior surface materials and furniture in a full-scale experimental investigation, Building and Environment, vol.47, pp.188-96, 2012.
DOI : 10.1016/j.buildenv.2011.07.025

H. Yoshino, T. Mitamura, and K. Hasegawa, Moisture buffering and effect of ventilation rate and volume rate of hygrothermal materials in a single room under steady state exterior conditions, Building and Environment, vol.44, issue.7, pp.1418-1443, 2009.
DOI : 10.1016/j.buildenv.2008.09.007

H. Zhang, H. Yoshino, and K. Hasegawa, Assessing the moisture buffering performance of hygroscopic material by using experimental method, Building and Environment, vol.48, pp.27-34, 2012.
DOI : 10.1016/j.buildenv.2011.08.012