G. Allaire, Conception optimale de structures, Mathématiques & Applications, vol.58

. Springer-verlag, , 2007.

G. Allaire, Numerical analysis and optimization. Numerical Mathematics and Scientific Computation, 2007.
URL : https://hal.archives-ouvertes.fr/hal-01242950

G. Allaire, C. Dapogny, G. Delgado, and G. Michailidis, Multi-phase structural optimization via a level set method, ESAIM Control Optim. Calc. Var, vol.20, issue.2, pp.576-611, 2014.
URL : https://hal.archives-ouvertes.fr/hal-00839464

G. Allaire, C. Dapogny, R. Estevez, A. Faure, and G. Michailidis, Structural optimization under overhang constraints imposed by additive manufacturing technologies, J. Comput. Phys, vol.351, pp.295-328, 2017.
URL : https://hal.archives-ouvertes.fr/hal-01523009

G. Allaire, C. Dapogny, A. Faure, and G. Michailidis, Shape optimization of a layer by layer mechanical constraint for additive manufacturing, C. R. Math. Acad. Sci, vol.355, issue.6, pp.699-717, 2017.
URL : https://hal.archives-ouvertes.fr/hal-01536668

G. Allaire and L. Jakabcin, Taking into account thermal residual stresses in topology optimization of structures built by additive manufacturing. M3AS, to appear
URL : https://hal.archives-ouvertes.fr/hal-01666081

G. Allaire and F. Jouve, A level-set method for vibration and multiple loads structural optimization, Computer methods in applied mechanics and engineering, vol.194, issue.30, pp.3269-3290, 2005.

G. Allaire, F. Jouve, and G. Michailidis, Molding direction constraints in structural optimization via a level-set method, Variational analysis and aerospace engineering, vol.116, pp.1-39, 2016.
URL : https://hal.archives-ouvertes.fr/hal-01242945

G. Allaire, F. Jouve, and G. Michailidis, Thickness control in structural optimization via a level set method, Struct. Multidiscip. Optim, vol.53, issue.6, pp.1349-1382, 2016.
URL : https://hal.archives-ouvertes.fr/hal-00985000

G. Allaire, F. Jouve, and A. Toader, Structural optimization using sensitivity analysis and a level-set method, J. Comput. Phys, vol.194, issue.1, pp.363-393, 2004.

C. Barlier and A. Bernard, Fabrication additive-Du Prototypage Rapidè a l'impression 3D

P. Dunod, , 2016.

M. P. Bendsøe and O. Sigmund, Topology Optimization, 2004.

E. G. Birgin and J. M. Martínez, Practical augmented Lagrangian methods for constrained optimization, Fundamentals of Algorithms. Society for Industrial and Applied Mathematics (SIAM), vol.10, 2014.
DOI : 10.1137/1.9781611973365

M. Bruggi, N. Parolini, F. Regazzoni, and M. Verani, Finite element approximation of an evolutionary topology optimization problem, Additive Manufacturing, vol.12, pp.60-70, 2017.
DOI : 10.7712/100016.2067.7766
URL : https://files.eccomasproceedia.org/papers/eccomas-congress-2016/7766.pdf?mtime=20170308163436

C. Bui, C. Dapogny, and P. Frey, An accurate anisotropic adaptation method for solving the level set advection equation, Internat. J. Numer. Methods Fluids, vol.70, issue.7, pp.899-922, 2012.
DOI : 10.1002/fld.2730

S. Cacace, E. Cristiani, and L. Rocchi, A level set based method for fixing overhangs in 3D printing, Appl. Math. Model, vol.44, pp.446-455, 2017.

F. Calignano, Design optimization of supports for overhanging structures in aluminium and titanium alloys by selective laser melting, Materials & Design, vol.64, pp.203-213, 2014.

J. Céa, Conception optimale ou identification de formes: calcul rapide de la dérivée directionnelle de la fonction cô ut, RAIRO Modél. Math. Anal. Numér, vol.20, issue.3, pp.371-402, 1986.

C. Dapogny and P. Frey, Computation of the signed distance function to a discrete contour on adapted triangulation, Calcolo, vol.49, issue.3, pp.193-219, 2012.

J. Dumas, J. Hergel, and S. Lefebvre, Bridging the gap: Automated steady scaffoldings for 3d printing, ACM Trans. Graph, vol.33, issue.4, pp.1-98, 2014.
URL : https://hal.archives-ouvertes.fr/hal-01100737

M. Gan and C. Wong, Practical support structures for selective laser melting, Journal of Materials Processing Technology, vol.238, pp.474-484, 2016.
DOI : 10.1016/j.jmatprotec.2016.08.006

N. Gardan and A. Schneider, Topological optimization of internal patterns and support in additive manufacturing, Journal of Manufacturing Systems, vol.37, pp.417-425, 2015.

I. Gibson, D. Rosen, and B. Stucker, Additive Manufacturing Technologies, 2015.

F. Hecht, New development in FreeFem++, J. Numer. Math, vol.20, issue.3-4, pp.251-265, 2012.
URL : https://hal.archives-ouvertes.fr/hal-01476313

A. Henrot and M. Pierre, Variation et optimisation de formes, Mathématiques & Applications, vol.48
DOI : 10.1007/3-540-37689-5

. Springer, , 2005.

K. Hu, S. Jin, and C. C. Wang, Support slimming for single material based additive manufacturing, Computer-Aided Design, vol.65, pp.1-10, 2015.
DOI : 10.1016/j.cad.2015.03.001

X. Huang, C. Ye, S. Wu, K. Guo, and J. Mo, Sloping wall structure support generation for fused deposition modeling, The International Journal of Advanced Manufacturing Technology, vol.42, issue.11, p.1074, 2008.
DOI : 10.1007/s00170-008-1675-2

A. Hussein, L. Hao, C. Yan, R. Everson, and P. Young, Advanced lattice support structures for metal additive manufacturing, Journal of Materials Processing Technology, vol.213, issue.7, pp.1019-1026, 2013.
DOI : 10.1016/j.jmatprotec.2013.01.020

Y. Kuo, C. Cheng, Y. Lin, and C. San, Support structure design in additive manufacturing based on topology optimization, Struct. Multidiscip. Optim, vol.57, issue.1, pp.183-195, 2018.
DOI : 10.1007/s00158-017-1743-z

Y. Kuo, C. Cheng, Y. Lin, and C. San, Support structure design in additive manufacturing based on topology optimization, Struct. Multidiscip. Optim, vol.57, issue.1, pp.183-195, 2018.

M. Langelaar, Topology optimization of 3d self-supporting structures for additive manufacturing, Additive Manufacturing, vol.12, pp.60-70, 2016.

M. Langelaar, Combined optimization of part topology, support structure layout and build orientation for additive manufacturing. Structural and Multidisciplinary Optimization, 2018.
DOI : 10.1007/s00158-017-1877-z
URL : https://link.springer.com/content/pdf/10.1007%2Fs00158-017-1877-z.pdf

M. Leary, L. Merli, F. Torti, M. Mazur, and M. Brandt, Optimal topology for additive manufacture: A method for enabling additive manufacture of support-free optimal structures, Materials & Design, vol.63, pp.678-690, 2014.

F. Mezzadri, V. Bouriakov, and X. Qian, Topology optimization of self-supporting support structures for additive manufacturing, vol.21, pp.666-682, 2018.

G. Michailidis, Manufacturing Constraints and Multi-Phase Shape and Topology Optimization via a Level-Set Method, 2014.
URL : https://hal.archives-ouvertes.fr/pastel-00937306

A. M. Mirzendehdel and K. Suresh, Support structure constrained topology optimization for additive manufacturing, Computer-Aided Design, vol.81, pp.1-13, 2016.
DOI : 10.1016/j.cad.2016.08.006

H. D. Morgan, J. A. Cherry, S. Jonnalagadda, D. Ewing, and J. Sienz, Part orientation optimisation for the additive layer manufacture of metal components, The International Journal of Advanced Manufacturing Technology, vol.86, issue.5, pp.1679-1687, 2016.

K. Mumtaz, P. Vora, and N. Hopkinson, A method to eliminate anchors/supports from directly laser melted metal powder bed processes, Proc. Solid Freeform Fabrication Symposium, pp.54-64, 2011.

S. Osher and R. Fedkiw, Level set methods and dynamic implicit surfaces, Applied Mathematical Sciences, vol.153, 2003.
DOI : 10.1115/1.1760520

O. Pironneau, Optimal shape design for elliptic systems, Springer Series in Computational Physics, 1984.
DOI : 10.1007/bfb0006123

J. A. Sethian, Level set methods and fast marching methods, Cambridge Monographs on Applied and Computational Mathematics, vol.3, 1999.

G. Strano, L. Hao, R. M. Everson, and K. E. Evans, A new approach to the design and optimisation of support structures in additive manufacturing, The International Journal of Advanced Manufacturing Technology, vol.66, issue.9, pp.1247-1254, 2013.

J. Vanek, J. A. Galicia, and B. Benes, Clever support: Efficient support structure generation for digital fabrication, Computer Graphics Forum, vol.33, issue.5, pp.117-125, 2014.
DOI : 10.1111/cgf.12437
URL : http://hpcg.purdue.edu/bbenes/papers/Vanek14SGP.pdf

L. Vese and T. Chan, A multiphase level set framework for image segmentation using the mumford and shah model, Int. J. Comput. Vision, vol.50, issue.3, pp.271-293, 2002.

M. Y. Wang and X. Wang, Color" level sets: a multi-phase method for structural topology optimization with multiple materials, Comput. Methods Appl. Mech. Engrg, vol.193, issue.6-8, pp.469-496, 2004.
DOI : 10.1016/j.cma.2003.10.008

X. Zhang, X. Le, A. Panotopoulou, E. Whiting, and C. C. Wang, Perceptual models of preference in 3d printing direction, ACM Trans. Graph, vol.34, issue.6, 2015.