N. F. Kushchevskaya, Finely divided Fe-Co-Ni powders made by a thermomechanical method Powder Metall, Met. Ceram, vol.35, pp.3-4, 1996.

V. Baco-carles, . Ph, . Combes, . Ph, A. Tailhades et al., New method to prepare iron particles with different morphologies: a way to get high green strength metal compacts, Powder Metallurgy, vol.8, issue.4, pp.33-38, 2002.
DOI : 10.1016/S0040-6031(99)00133-1

P. Mollard, A. Collomb, J. Devenyi, A. Rousset, and J. Paris, A contribution to the investigation of fine-particle solid solutions between cubic iron sesquioxide ??Fe<inf>2</inf>O<inf>3</inf>and cobalt ferrite CoFe<inf>2</inf>O<inf>4</inf>, IEEE Transactions on Magnetics, vol.11, issue.3, pp.894-900, 1975.
DOI : 10.1109/TMAG.1975.1058769

J. K. Bartley, C. L. Xu, R. Lloyd, D. I. Enache, D. W. Knight et al., Simple method to synthesize high surface area magnesium oxide and its use as a heterogeneous base catalyst, Applied Catalysis B: Environmental, vol.128, pp.362-382, 2016.
DOI : 10.1016/j.apcatb.2012.03.036

Y. C. Ye, Y. T. Zhao, L. L. Ni, K. D. Jiang, G. X. Tong et al., Facile synthesis of unique NiO nanostructures for efficiently catalytic conversion of CH4 at low temperature, Appl. Catal. B, vol.128, pp.31-38, 2012.

X. M. Ma, N. Campbell, L. Madec, M. A. Rankin, L. M. Croll et al., Novel nanoporous MnOx (x = similar to 1.75) sorbent for the removal of SO2 and NH3 made from MnC2O4 2H2O, J. Colloid Interface Sci, pp.465-323, 2016.

. Fontaine, Elaboration of metallic compacts with high porosity for mechanical supports of SOFC, Solid State Sci, vol.11, issue.2, pp.444-450, 2009.
URL : https://hal.archives-ouvertes.fr/hal-00425042

R. Xu, J. Wang, Q. Li, X. Xu, G. Sun et al., Porous cobalt oxide (Co3O4) nanorods: Facile syntheses, optical property and application in lithium-ion batteries, Journal of Solid State Chemistry, vol.182, issue.11, pp.3177-3182, 2009.
DOI : 10.1016/j.jssc.2009.08.033

X. Yao, X. Xin, Y. Zhang, and X. Xu, Co3O4 nanowires as high capacity anode materials for lithium ion batteries, Journal of Alloys and Compounds, vol.521, pp.95-100, 2012.
DOI : 10.1016/j.jallcom.2012.01.047

. Ph, V. Tailhades, A. Carles, and . Rousset, Method of preparing metal powders, metal powders prepared in this way and compacts that include these powders US Patent 6, p.750, 2002.

R. J. Deffeyes and W. R. Tyler, Acicular metallic powders produced from the organometallic salts US Patent 4, p.917, 1977.

T. Ph, M. Brieu, P. Mollard, A. Rousset, and Y. Chassaigne, High performances boron doped -Fe2O3 particles prepared from oxalic precursorss, IEEE Trans. Magn, vol.26, issue.1, pp.63-65, 1990.

V. Baco, I. Pasquet, V. Laurent, and A. Gabriel, Preparation and electrical properties of dense micro-cermets made of nickel ferrite and metallic copper, Solid State Sciences, vol.11, issue.8, pp.1503-1506, 2009.
DOI : 10.1016/j.solidstatesciences.2009.05.016
URL : https://hal.archives-ouvertes.fr/hal-00457357

K. Kiryukhina, H. Le-trong, J. Tailhades-ph-lacaze, V. Baco, M. Gougeon et al., Silver oxalate-based solders: New materials for high thermal conductivity microjoining, Scripta Materialia, vol.68, issue.8, pp.68-623, 2013.
DOI : 10.1016/j.scriptamat.2012.12.018
URL : https://hal.archives-ouvertes.fr/hal-00832138

I. Pasquet, L. Presmanes, and C. Bonningue, Patterned ferrimagnetic thin films of spinel ferrites obtained directly by laser irradiation, Applied Surface Science, vol.283, pp.283-289, 2013.
DOI : 10.1016/j.apsusc.2013.05.160
URL : https://hal.archives-ouvertes.fr/hal-00863291

B. Kang, S. Han, J. Kim, S. H. Ko, and M. Yang, One-Step Fabrication of Copper Electrode by Laser-Induced Direct Local Reduction and Agglomeration of Copper Oxide Nanoparticle, The Journal of Physical Chemistry C, vol.115, issue.48, pp.23664-23670, 2011.
DOI : 10.1021/jp205281a

S. Han, S. Hong, J. Yeo, D. Kim, B. Kang et al., Nanorecycling: Monolithic Integration of Copper and Copper Oxide Nanowire Network Electrode through Selective Reversible Photothermochemical Reduction, Advanced Materials, vol.9, issue.41, pp.27-6397, 2015.
DOI : 10.1002/smll.201202824

T. Chartier, C. Dupas, M. Lasgorceix, J. Brie, E. Champion et al., Additive manufacturing to produce complex 3D ceramic parts, J. Ceram. Sci. Tech, pp.6-95, 2015.
URL : https://hal.archives-ouvertes.fr/hal-01278658

M. Singlard, A. Aimable, M. Lejeune, C. Dossou-yovo, M. Poncelet et al., Aqueous suspensions of glass silicate dielectric powders for ink-jet printing applications, Powder Technology, vol.266, pp.303-311, 2014.
DOI : 10.1016/j.powtec.2014.06.044
URL : https://hal.archives-ouvertes.fr/hal-01108406

R. Deyrieux, C. Berro, and A. Peneloux, Contribution à l'étude des oxalates de certains métaux bivalents, Bull. Soc. Chim. Fr, pp.25-34, 1973.

I. Sandu, L. Presmanes, and P. Alphonse, Nanostructured cobalt manganese ferrite thin films for gas sensor application, Thin Solid Films, vol.495, issue.1-2, pp.130-133, 2006.
DOI : 10.1016/j.tsf.2005.08.318
URL : https://hal.archives-ouvertes.fr/hal-00474866

G. Sakai, N. Matsunaga, K. Shimanoe, and N. Yamazoe, Theory of gas-diffusion controlled sensitivity for thin film semiconductor gas sensor, Sensors and Actuators B: Chemical, vol.80, issue.2, pp.125-131, 2001.
DOI : 10.1016/S0925-4005(01)00890-5

T. T. Kodas, M. J. Hampden-smith, K. Atanassova, K. Kunze, H. Van-heudsen et al., Low viscosity precursor compositions and methods for the deposition of conductive electronic features Patent, 2003.

C. Lin, Y. Bai, and R. Zhang, Ink and method of forming electrical traces using the same Patent, pp.291230-291231, 2009.

S. Hirano, T. Yogo, K. Kikuta, E. Asai, K. Sugiyama et al., Preparation and Phase Separation Behavior of (Co,Fe)3O4 Films, Journal of the American Ceramic Society, vol.233, issue.11, pp.76-1788, 1993.
DOI : 10.1111/j.1151-2916.1993.tb06648.x

W. H. Meiklejohn, Exchange Anisotropy in the Iron???Iron Oxide System, Journal of Applied Physics, vol.1, issue.3, pp.454-455, 1958.
DOI : 10.1103/PhysRev.105.904

J. Nogués, I. K. Schuller, J. Exchange-biais, and . Mag, Exchange bias, Journal of Magnetism and Magnetic Materials, vol.192, issue.2, pp.203-232, 1999.
DOI : 10.1016/S0304-8853(98)00266-2