J. Besson, Continuum Models of Ductile Fracture: A Review, International Journal of Damage Mechanics, vol.121, issue.1, pp.3-52, 2010.
DOI : 10.1016/S0013-7944(00)00055-2
URL : https://hal.archives-ouvertes.fr/hal-00550957

A. Benzerga and J. Leblond, Ductile Fracture by Void Growth to Coalescence, Adv. Appl. Mech, vol.44, pp.169-305, 2010.
DOI : 10.1016/S0065-2156(10)44003-X

A. Pineau, A. Benzerga, and T. Pardoen, Failure of metals I: Brittle and ductile fracture, Acta Materialia, vol.107, pp.424-483, 2016.
DOI : 10.1016/j.actamat.2015.12.034
URL : https://hal.archives-ouvertes.fr/hal-01308255

N. Thomas, S. Basu, and A. Benzerga, On fracture loci of ductile materials under non-proportional loading, International Journal of Mechanical Sciences, vol.117, pp.135-151, 2016.
DOI : 10.1016/j.ijmecsci.2016.08.007

J. Lemaitre and R. Desmorat, Engineering Damage Mechanics, 2005.

L. Kachanov, Time of the rupture process under creep conditions

Y. Rabotnov, On the Equations of State for Creep, pp.307-315, 1963.

J. Lemaitre, A Course on Damage Mechanics, 1992.

A. Gurson, Continuum Theory of Ductile Rupture by Void Nucleation and Growth: Part I -Yield Criterion and Flow Rules for Porous Ductile Media, ASME J. Eng. Mat. Techn, pp.99-101, 1977.

]. A. Needleman and V. Tvergaard, An analysis of ductile rupture in notched bars, Journal of the Mechanics and Physics of Solids, vol.32, issue.6, pp.475-461, 1984.
DOI : 10.1016/0022-5096(84)90031-0

E. Maire, A. Fazekas, L. Salvo, R. Dendievel, S. Youssef et al., X-ray tomography applied to the characterization of cellular materials. Related finite element modeling problems, Composites Science and Technology, vol.63, issue.16, pp.2431-2443, 2003.
DOI : 10.1016/S0266-3538(03)00276-8
URL : https://hal.archives-ouvertes.fr/hal-00475150

L. Salvo, P. Cloetens, E. Maire, S. Zabler, J. J. Blandin et al., X-ray micro-tomography 485 an attractive characterisation technique in materials science
DOI : 10.1016/s0168-583x(02)01689-0

E. Maire and P. J. Withers, Quantitative X-ray tomography, International Materials Reviews, vol.42, issue.3, pp.1-43, 2014.
DOI : 10.1016/j.jnucmat.2011.03.051
URL : https://hal.archives-ouvertes.fr/hal-01538208

L. Babout, E. Maire, and R. Fougères, Damage initiation in model metallic materials: X-ray tomography and modelling, Acta Materialia, vol.52, issue.8, pp.2475-2487, 2004.
DOI : 10.1016/j.actamat.2004.02.001
URL : https://hal.archives-ouvertes.fr/hal-00474482

P. Bouchard, L. Bourgeon, H. Lachapele, E. Maire, C. Verdu et al., On the influence of particles distribution and reverse loading on damage mechanisms of ductile steel alloys, Mat. Sci. Eng, pp.495-496, 2008.

T. Ueda, L. Helfen, and T. F. Morgeneyer, In situ laminography study of threedimensional individual void shape evolution at crack initiation and comparison with Gurson-Tvergaard-Needleman-type simulations, Acta Mat, pp.78-254, 2014.
URL : https://hal.archives-ouvertes.fr/hal-01056836

]. F. Hannard, T. Pardoen, E. Maire, C. L. Bourlot, R. Mokso et al., Characterization and micromechanical modelling of microstructural heterogeneity effects on ductile fracture of 6xxx aluminium alloys, Acta Materialia, vol.103, pp.500-558, 2016.
DOI : 10.1016/j.actamat.2015.10.008
URL : https://hal.archives-ouvertes.fr/hal-01523721

C. Landron, O. Bouaziz, E. Maire, and J. Adrien, Characterization and modeling of void nucleation by interface decohesion in dual phase steels, Scripta Materialia, vol.63, issue.10, pp.973-976, 2010.
DOI : 10.1016/j.scriptamat.2010.07.021
URL : https://hal.archives-ouvertes.fr/hal-00523143

M. Shakoor, A. Buljac, J. Neggers, F. Hild, T. Morgeneyer et al., On the choice of boundary conditions for micromechanical simulations based on 3D??imaging, International Journal of Solids and Structures, vol.112, pp.83-96, 2017.
DOI : 10.1016/j.ijsolstr.2017.02.018
URL : https://hal.archives-ouvertes.fr/hal-01471645

F. Fritzen, S. Forest, T. Boehlke, D. Kondo, and T. Kanit, Computational homogenization of elasto-plastic porous metals, International Journal of Plasticity, vol.29, pp.102-119, 2012.
DOI : 10.1016/j.ijplas.2011.08.005
URL : https://hal.archives-ouvertes.fr/hal-00645498

C. Zhang, B. Bajaj, and . Sohn, 3D finite element meshing from imaging data, Computer Methods in Applied Mechanics and Engineering, vol.194, issue.48-49, pp.54548-54597, 2005.
DOI : 10.1016/j.cma.2004.11.026
URL : http://europepmc.org/articles/pmc2748876?pdf=render

P. Young, T. Beresford-west, S. Coward, B. Notarberardino, B. Walker et al., Abdul-Aziz, An efficient approach to converting three-dimensional image data into highly accurate computational models, Phil. Trans. A, vol.366, pp.550-3155, 1878.

S. Osher and J. Sethian, Fronts propagating with curvature-dependent speed: Algorithms based on Hamilton-Jacobi formulations, Journal of Computational Physics, vol.79, issue.1, pp.12-49, 1988.
DOI : 10.1016/0021-9991(88)90002-2

N. Sukumar, D. Chopp, N. Moës, and T. Belytschko, Modeling holes and inclu- 555 sions by level sets in the extended finite-element method

E. Roux, M. Bernacki, and P. Bouchard, A level-set and anisotropic adaptive remeshing strategy for the modeling of void growth under large plastic strain, Computational Materials Science, vol.68, pp.32-46
DOI : 10.1016/j.commatsci.2012.10.004
URL : https://hal.archives-ouvertes.fr/hal-00756435

]. Quan, T. Toulorge, E. Marchandise, J. Remacle, and G. Bricteux, Anisotropic mesh adaptation with optimal convergence for finite elements using embedded geometries, Computer Methods in Applied Mechanics and Engineering, vol.268, pp.560-268, 2014.
DOI : 10.1016/j.cma.2013.09.007

M. Shakoor, B. Scholtes, P. Bouchard, and M. Bernacki, An efficient and par- 565 allel level set reinitialization method -Application to micromechanics and microstructural evolutions, Appl. Math. Modell, vol.39, pp.23-24, 2015.

J. Buffì-ere, E. Maire, P. Cloetens, G. Lormand, and R. Fougères, Characterization of internal damage in a MMCp using X-ray synchrotron phase contrast microtomography, Acta Materialia, vol.47, issue.5, pp.1613-1625, 1999.
DOI : 10.1016/S1359-6454(99)00024-5

J. Buffì-ere, E. Maire, J. Adrien, J. Masse, and E. Boller, In Situ Experiments with X ray Tomography: an Attractive Tool for Experimental Mechanics, Experimental Mechanics, vol.17, issue.2, pp.289-305, 2010.
DOI : 10.1016/j.crme.2008.06.006

B. Bay, T. Smith, M. Fyhrie, and . Saad, Digital volume correlation: Three-dimensional strain mapping using X-ray tomography, Experimental Mechanics, vol.27, issue.10???12, pp.39-217, 1999.
DOI : 10.2118/22943-PA

T. Smith, M. Bay, and . Rashid, Digital volume correlation including rotational degrees of freedom during minimization, Experimental Mechanics, vol.48, issue.10, pp.272-278, 2002.
DOI : 10.1117/12.7976778

M. Bornert, J. Chaix, P. Doumalin, J. Dupré, T. Fournel et al., Mesure tridimensionnelle de champs cinématiques par imagerie volumique pour l'analyse des matériaux et des structures, Inst. Mes. Métrol, vol.4, pp.43-88, 2004.

E. Verhulp, B. Van-rietbergen, and R. Huiskes, A three-dimensional digital image correlation technique for strain measurements in microstructures, Journal of Biomechanics, vol.37, issue.9, pp.1313-1320, 2004.
DOI : 10.1016/j.jbiomech.2003.12.036

S. Roux, F. Hild, P. Viot, and D. Bernard, Three-dimensional image correlation from X-ray computed tomography of solid foam, Composites Part A: Applied Science and Manufacturing, vol.39, issue.8, pp.1253-1265, 2008.
DOI : 10.1016/j.compositesa.2007.11.011
URL : https://hal.archives-ouvertes.fr/hal-01006730

J. Rannou, N. Limodin, J. Réthoré, A. Gravouil, W. Ludwig et al., Three dimensional experimental and numerical multiscale analysis of a fatigue crack, Computer Methods in Applied Mechanics and Engineering, vol.199, issue.21-22
DOI : 10.1016/j.cma.2009.09.013
URL : https://hal.archives-ouvertes.fr/hal-00430486

A. Bouterf, J. Adrien, E. Maire, X. Brajer, F. Hild et al., Identification of the crushing behavior of brittle foam: From indentation to oedometric tests, Journal of the Mechanics and Physics of Solids, vol.98, pp.181-200, 2017.
DOI : 10.1016/j.jmps.2016.09.011

A. Buljac, M. Shakoor, M. Bernacki, P. Bouchard, T. Morgeneyer et al., Numerical validation framework for micromechanical simulations based on synchrotron 3D imaging, Computational Mechanics, vol.45, issue.48???49, pp.2017-419
DOI : 10.1016/j.euromechsol.2013.11.006
URL : https://hal.archives-ouvertes.fr/hal-01480980

M. Dong, C. Prioul, and D. François, Damage effect on the fracture toughness of nodular cast iron: Part I. Damage characterization and plastic flow stress modeling, Metallurgical and Materials Transactions A, vol.37, issue.1, pp.2245-2254, 1997.
DOI : 10.2320/matertrans1960.20.569

K. Zhang, J. Bai, and D. François, Ductile fracture of materials with high void volumefraction, International Journal of Solids and Structures, vol.36, issue.23, pp.3407-3425, 1999.
DOI : 10.1016/S0020-7683(98)00157-7

N. Bonora and A. Ruggiero, Micromechanical modeling of ductile cast iron incorporating damage. Part I: Ferritic ductile cast iron, International Journal of Solids and Structures, vol.42, issue.5-6, pp.610-652, 2005.
DOI : 10.1016/j.ijsolstr.2004.07.025

G. Hütter, L. Zybell, and M. Kuna, Micromechanisms of fracture in nodular cast iron: From experimental findings towards modeling strategies ??? A review, Engineering Fracture Mechanics, vol.144, pp.118-141, 2015.
DOI : 10.1016/j.engfracmech.2015.06.042

Z. Tomi?evi´tomi?evi´c, J. Kodvanj, and F. Hild, Characterization of the nonlinear behavior of nodular graphite cast??iron via inverse identification???Analysis of uniaxial tests, European Journal of Mechanics - A/Solids, vol.59, pp.140-154, 2016.
DOI : 10.1016/j.euromechsol.2016.02.010

H. Leclerc, J. Périé, S. Roux, and F. Hild, Voxel-Scale Digital Volume Correlation, Experimental Mechanics, vol.22, issue.9, pp.479-490, 2011.
DOI : 10.1179/174328406X114135
URL : https://hal.archives-ouvertes.fr/hal-00521193

H. Leclerc, J. Périé, F. Hild, and S. Roux, Digital volume correlation: what are the limits to the spatial resolution?, Mechanics & Industry, vol.63, issue.6, pp.361-371, 2012.
DOI : 10.1177/0309324711409999
URL : https://hal.archives-ouvertes.fr/hal-00848721

A. Bouterf, S. Roux, F. Hild, J. Adrien, and E. Maire, Digital Volume Correlation Applied to X-ray Tomography Images from Spherical Indentation Tests on Lightweight Gypsum, Strain, vol.196, issue.2, pp.444-453, 2014.
DOI : 10.1016/j.cma.2007.06.019
URL : https://hal.archives-ouvertes.fr/hal-01068402

A. Buljac, T. Taillandier-thomas, L. Helfen, T. Morgeneyer, and F. Hild, Evaluation of measurement uncertainties of digital volume correlation applied to laminography data, The Journal of Strain Analysis for Engineering Design, vol.63, issue.5, pp.49-65, 2018.
DOI : 10.1111/j.1365-2818.2006.01706.x
URL : https://hal.archives-ouvertes.fr/hal-01674568

N. Limodin, J. Réthoré, J. Adrien, J. Buffì-ere, F. Hild et al., Analysis and Artifact Correction for Volume Correlation Measurements Using Tomographic Images from a Laboratory X-ray Source, Experimental Mechanics, vol.47, issue.3, pp.959-970, 2011.
DOI : 10.1016/j.optlaseng.2008.10.015
URL : https://hal.archives-ouvertes.fr/hal-00521190

E. Roux, M. Shakoor, M. Bernacki, P. Bouchard, M. Shakoor et al., A new finite element approach for modelling ductile damage void nucleation and growth analysis of loading path effect on damage mechanisms, Model A new body-fitted immersed volume method for the modeling of ductile fracture at the microscale: Analysis of void clusters and stress state effects on coalescence, Simul. Mat. Sci. Eng. Eng. Fract. Mech, vol.22, issue.147, pp.398-417, 2015.

M. Shakoor, P. Bouchard, and M. Bernacki, An adaptive level-set method with enhanced volume conservation for simulations in multiphase domains, International Journal for Numerical Methods in Engineering, vol.5, issue.1, pp.555-576, 2017.
DOI : 10.1007/s12289-011-1030-2
URL : https://hal.archives-ouvertes.fr/hal-01327907

D. Boffi, F. Brezzi, L. Demkowicz, R. Durán, R. Falk et al., Mixed Finite Elements, Compatibility Conditions, and Applications Metal Forming Analysis, Lecture Notes in Mathematics, vol.193967, p.645, 2001.
DOI : 10.1007/978-3-540-78319-0

P. Ludwik, Elemente der technologischen Mechanik, 1909.
DOI : 10.1007/978-3-662-40293-1

A. Tarantola, Inverse Problems Theory. Methods for Data Fitting and 650

J. Mottershead, M. Link, and M. , The sensitivity method in finite element model updating: A tutorial, Mechanical Systems and Signal Processing, vol.25, issue.7, pp.2275-2296, 2011.
DOI : 10.1016/j.ymssp.2010.10.012

J. Collins, G. Hart, T. Hasselman, and B. Kennedy, Statistical identification of structures, 14th Structures, Structural Dynamics, and Materials Conference, pp.185-190, 1974.
DOI : 10.2514/6.1973-339

E. Pagnacco, A. Caro-bretelle, and P. Ienny, Parameter Identification from Mechanical Field Measurements using Finite Element Model Updating Strategies, pp.2012-247
DOI : 10.4028/www.scientific.net/AMM.7-8.73