W. Frazier, Metal Additive Manufacturing: A Review, Journal of Materials Engineering and Performance, vol.35, issue.2, pp.1917-1928, 2014.
DOI : 10.1007/s11663-004-0104-7

G. Kannan and D. Rajendran, A review on status of research in metal additive manufacturing Advances in 3D printing & additive manufacturing technologies, pp.95-100, 2017.

R. Rashid, S. Masood, and D. Ruan, Effect of scan strategy on density and metallurgical properties of 17-4PH parts printed by Selective Laser Melting (SLM), Journal of Materials Processing Technology, vol.249, pp.502-511, 2017.
DOI : 10.1016/j.jmatprotec.2017.06.023

C. Guo, W. Ge, and F. Lin, Effects of scanning parameters on material deposition during Electron Beam Selective Melting of Ti-6Al-4V powder, Journal of Materials Processing Technology, vol.217, pp.148-157, 2015.
DOI : 10.1016/j.jmatprotec.2014.11.010

D. Ding, Z. Pan, and D. Cuiuri, Wire-feed additive manufacturing of metal components: technologies, developments and future interests, The International Journal of Advanced Manufacturing Technology, vol.79, issue.1-4, pp.465-481, 2015.
DOI : 10.1016/S0308-0161(02)00024-8

S. Thompson, L. Bian, and N. Shamsaei, An overview of Direct Laser Deposition for additive manufacturing; Part I: Transport phenomena, modeling and diagnostics, Additive Manufacturing, vol.8, pp.36-62, 2015.
DOI : 10.1016/j.addma.2015.07.001

S. Jhavar, N. Jain, and C. Paul, Development of micro-plasma transferred arc (??-PTA) wire deposition process for additive layer manufacturing applications, Journal of Materials Processing Technology, vol.214, issue.5, pp.1102-1110, 2014.
DOI : 10.1016/j.jmatprotec.2013.12.016

J. Lin, Y. Lv, and Y. Liu, Microstructural evolution and mechanical property of Ti-6Al-4V wall deposited by continuous plasma arc additive manufacturing without post heat treatment, Journal of the Mechanical Behavior of Biomedical Materials, vol.69, pp.19-29, 2017.
DOI : 10.1016/j.jmbbm.2016.12.015

H. Geng, J. Li, and J. Xiong, Optimization of wire feed for GTAW based additive manufacturing, Journal of Materials Processing Technology, vol.243, pp.40-47, 2017.
DOI : 10.1016/j.jmatprotec.2016.11.027

S. Williams, F. Martina, and A. Addison, Wire + Arc Additive Manufacturing, Materials Science and Technology, vol.10, issue.12, pp.641-647, 2016.
DOI : 10.1364/OE.14.010435
URL : http://www.tandfonline.com/doi/pdf/10.1179/1743284715Y.0000000073?needAccess=true

S. Williams and M. F. , Wire+arc additive manufacturing vs. traditional machining from solid: a cost comparison, Welding Engineering and Laser Processing Centre, 2015.
DOI : 10.1179/1743284715y.0000000073
URL : http://www.tandfonline.com/doi/pdf/10.1179/1743284715Y.0000000073?needAccess=true

P. Wang, S. Hu, and J. Shen, Characterization the contribution and limitation of the characteristic processing parameters in cold metal transfer deposition of an Al alloy, Journal of Materials Processing Technology, vol.245, pp.122-133, 2017.
DOI : 10.1016/j.jmatprotec.2017.02.019

J. Feng, H. Zhang, and P. He, The CMT short-circuiting metal transfer process and its use in thin aluminium sheets welding, Materials & Design, vol.30, issue.5, pp.1850-1852, 2009.
DOI : 10.1016/j.matdes.2008.07.015

C. Pickin, S. Williams, and M. Lunt, Characterisation of the cold metal transfer (CMT) process and its application for low dilution cladding, Journal of Materials Processing Technology, vol.211, issue.3, pp.496-502, 2011.
DOI : 10.1016/j.jmatprotec.2010.11.005

B. Mezrag, F. Deschaux-beaume, and M. Benachour, Control of mass and heat transfer for steel/aluminium joining using Cold Metal Transfer process, Science and Technology of Welding and Joining, vol.61, issue.3, pp.189-198, 2015.
DOI : 10.1016/j.jmatprotec.2010.11.005
URL : https://hal.archives-ouvertes.fr/hal-01289341

J. Pang, S. Hu, and J. Shen, Arc characteristics and metal transfer behavior of CMT + P welding process, Journal of Materials Processing Technology, vol.238, pp.212-217, 2016.
DOI : 10.1016/j.jmatprotec.2016.07.033

J. Gu, B. Cong, and J. Ding, Wire + arc additive manufacturing of aluminium. Proceedings of Solid Freeform Fabrication Symposium, p.451, 2014.

M. Chen, D. Zhang, and C. Wu, Current waveform effects on CMT welding of mild steel, Journal of Materials Processing Technology, vol.243, pp.395-404, 2017.
DOI : 10.1016/j.jmatprotec.2017.01.004

S. Hu, H. Zhang, and Z. Wanga, The arc characteristics of cold metal transfer welding with AZ31 magnesium alloy wire, Journal of Manufacturing Processes, vol.24, pp.298-306, 2016.
DOI : 10.1016/j.jmapro.2016.10.001

C. Baoqiang, O. Ruijie, and Q. Bojin, Influence of cold metal transfer process and its heat input on weld bead geometry and porosity of aluminum-copper alloy welds, Rare Met Mater Eng, vol.45, pp.606-611, 2016.

N. Kumar, S. Vendan, and N. Shanmugam, Investigations on the parametric effects of cold metal transfer process on the microstructural aspects in AA6061, Journal of Alloys and Compounds, vol.658, pp.255-264, 2016.
DOI : 10.1016/j.jallcom.2015.10.166

B. Gungor, E. Kaluc, and E. Taban, Mechanical and microstructural properties of robotic Cold Metal Transfer (CMT) welded 5083-H111 and 6082-T651 aluminum alloys, Materials & Design (1980-2015), vol.54, pp.207-211, 2014.
DOI : 10.1016/j.matdes.2013.08.018

F. Lu, H. Wang, and A. Murphy, Analysis of energy flow in gas metal arc welding processes through self-consistent three-dimensional process simulation, International Journal of Heat and Mass Transfer, vol.68, pp.215-223, 2014.
DOI : 10.1016/j.ijheatmasstransfer.2013.09.021