B. Laub and E. Venkatapathy, Thermal Protection System Technology and facility Needs for Demanding Future Planetary Missions Workshop on Planetary Probe Atmospheric Entry and Descent Trajectory Analysis and Science, Procs. Intl ESA Confs. Procs. SP-544, pp.239-247, 2004.

M. Dauchier and J. Cavalier, Matériaux composites phénoliques ablatifs

G. Sykes, Decomposition characteristics of a char-forming phenolic polymer used for ablative composites, 1967.

Y. Kanno, Development of ablative material for planetary entry, Procs. 9 th International Conference on Composite Materials VI ? Composites: Properties and Applications, pp.120-124, 1993.

M. Gregori, E. Barros, P. Filho, G. Pardini, L. Costa et al., Ablative and mechanical properties of quartz phenolic composites, Journal of Aerospace Technology and Management, vol.1, issue.1, pp.63-68, 2009.
DOI : 10.5028/jatm.2009.01016368

M. Sohn and X. Hu, Mode II delamination toughness of carbon-fibre/epoxy composites with chopped Kevlar fibre reinforcement, Composites Science and Technology, vol.52, issue.3, pp.52-439, 1994.
DOI : 10.1016/0266-3538(94)90179-1

E. Greenhalgh and M. Hiley, The assessment of novel materials and processes for the impact tolerant design of stiffened composite aerospace structures, Composites Part A: Applied Science and Manufacturing, vol.34, issue.2, pp.34-151, 2003.
DOI : 10.1016/S1359-835X(02)00188-4

R. Kumar, R. Vinod, G. Renjith, S. , R. G. Jana et al., Thermo-structural analysis of composite structures, Materials Science and Engineering: A, vol.412, issue.1-2, pp.412-413, 2005.
DOI : 10.1016/j.msea.2005.08.065

G. Vignoles, G. Bresson, C. Lorrette, and A. Ahmadi-sénichault, Measurement of the thermal diffusivity of a silica fiber bundle using a laser and an IR camera, Journal of Physics: Conference Series, vol.395, p.12079
DOI : 10.1088/1742-6596/395/1/012079
URL : https://hal.archives-ouvertes.fr/hal-01202129

A. Degiovanni, Diffusivité thermique et méthode flash, Rev. Gén. Therm, pp.185-420, 1977.

W. Parker, J. Jenkins, C. Butter, and G. Abbot, Flash Method of Determining Thermal Diffusivity, Heat Capacity, and Thermal Conductivity, Journal of Applied Physics, vol.32, issue.9, pp.32-1679, 1961.
DOI : 10.1063/1.1728417

M. Gustavsson, E. Karawacki, and S. Gustafsson, Thermal conductivity, thermal diffusivity, and specific heat of thin samples from transient measurements with hot disk sensors, Review of Scientific Instruments, vol.23, issue.12, pp.65-3856, 1994.
DOI : 10.1088/0022-3727/12/9/003

M. Gustavsson and S. Gustafsson, On the Use of Transient Plane Source Sensors for Studying Materials with Direction Dependent Properties, Procs. Thermal Conductivity 26-Thermal Expansion 14, Joint conferences 2001, pp.367-377, 2005.

E. Maire, J. Buffière, L. Salvo, J. Blandin, W. Ludwig et al., On the Application of X-ray Microtomography in the Field of Materials Science, Advanced Engineering Materials, vol.3, issue.8, pp.3-539, 2001.
DOI : 10.1002/1527-2648(200108)3:8<539::AID-ADEM539>3.0.CO;2-6
URL : https://hal.archives-ouvertes.fr/hal-00475297

G. Herman, Image reconstruction from projections, 1980.
DOI : 10.1006/rtim.1995.1002

L. Feldkamp, L. Davis, and J. Kress, Practical cone-beam algorithm, Journal of the Optical Society of America A, vol.1, issue.6, pp.612-619
DOI : 10.1364/JOSAA.1.000612
URL : http://www.engineering.uiowa.edu/~mchen/reconstruction/practical feldkamp.pdf

G. Vignoles, O. Coindreau, A. Ahmadi, and D. Bernard, Assessment of geometrical and transport properties of a fibrous C/C composite preform as digitized by x-ray computerized microtomography: Part II. Heat and gas transport properties, Journal of Materials Research, vol.61, issue.06, pp.221537-1550, 2007.
DOI : 10.1016/j.ces.2006.04.025

J. Lux, A. Ahmadi, C. Gobbé, and C. Delisée, Macroscopic thermal properties of real fibrous materials: Volume averaging method and 3D image analysis, International Journal of Heat and Mass Transfer, vol.49, issue.11-12, pp.49-60, 2006.
DOI : 10.1016/j.ijheatmasstransfer.2005.09.038
URL : https://hal.archives-ouvertes.fr/hal-00312654

M. Bamford, M. Florian, G. Vignoles, J. Batsale, A. Cairo et al., Global and local characterization of the thermal diffusivities of SiCf/SiC composites with infrared thermography and flash method, Composites Science and Technology, vol.69, issue.7-8, pp.69-76, 2009.
DOI : 10.1016/j.compscitech.2009.02.004
URL : https://hal.archives-ouvertes.fr/hal-00410358

M. Bamford, J. Batsale, and O. Fudym, Nodal and modal strategies for longitudinal thermal diffusivity profile estimation: Application to the non destructive evaluation of SiC/SiC composites under uniaxial tensile tests, Infrared Physics & Technology, vol.52, issue.1, pp.52-53, 2009.
DOI : 10.1016/j.infrared.2008.01.002

J. Mottram and R. Taylor, Thermal conductivity of fibre-phenolic resin composites. Part I: Thermal diffusivity measurements, Composites Science and Technology, vol.29, issue.3, pp.29-189
DOI : 10.1016/0266-3538(87)90070-4

M. Garnett and J. , Colors in metal glasses and in metallic films, Philos Trans R Soc Lond, vol.203, pp.2083-2092, 1904.

D. Hasselmann and L. Johnson, Effective Thermal Conductivity of Composites with Interfacial Thermal Barrier Resistance, Journal of Composite Materials, vol.24, issue.6, pp.508-515, 1987.
DOI : 10.1063/1.1735816

W. Perrins, D. Mckenzie, and R. Mcphedran, Transport Properties of Regular Arrays of Cylinders, Proc R Soc Lond A, pp.207-225, 1979.
DOI : 10.1098/rspa.1979.0160

O. Coindreau and G. Vignoles, Assessment of structural and transport properties in fibrous C/C composite preforms as digitized by X-ray CMT. Part I : Image acquisition and geometrical properties, J Mater Res, issue.9, pp.20-2328, 2005.
URL : https://hal.archives-ouvertes.fr/hal-00407504