Nafion-Based Fully Passive Solid-State Conductive Bridging RF Switch - Archive ouverte HAL Accéder directement au contenu
Article Dans Une Revue IEEE Microwave and Wireless Components Letters Année : 2017

Nafion-Based Fully Passive Solid-State Conductive Bridging RF Switch

Résumé

This letter reports the design and development of a Conductive Bridging RF-Switch with simple fabrication steps without the use of any clean room technologies. The reported device is a fully passive shunt mode RF-Switch on a Co-Planar Waveguide (CPW) transmission line, which operates in the DC to 3GHz range. This particular topology is chosen in contemplation to limitations imposed by the chosen realization process. The device is based on a Metal-Insulator (electrolyte)-Metal (MIM) structure, with Copper-Nafion ®-Aluminum switching layers. S21 switching between-1dB (RF-On) and-16dB (RF-Off) is demonstrated till 3GHz by the device. DC pulses in the range 18V/0.5mA and-20V/0.1A are used respectively to SET and RESET the switch, and the instantaneous power consumed for SET and RESET is respectively 1.7µW and 3mW. The SET and RESET state DC resistance of the switch are observed as 2Ω and 2MΩ subsequently. The model is initially simulated using commercial FEM based Electromagnetic modeling tool and validated experimentally.

Mots clés

Fichier principal
Vignette du fichier
Nafion Based Fully Passive Solid State Conductive Bridging RF Switch - Preprint.pdf (452.98 Ko) Télécharger le fichier
Origine : Fichiers produits par l'(les) auteur(s)
Loading...

Dates et versions

hal-01753194 , version 1 (13-01-2020)

Identifiants

Citer

Jayakrishnan Methapettyparambu Purushothama, Arnaud Vena, Afaf Meghit, Brice Sorli, Etienne Perret. Nafion-Based Fully Passive Solid-State Conductive Bridging RF Switch. IEEE Microwave and Wireless Components Letters, 2017, 27 (12), pp.1104 - 1106. ⟨10.1109/lmwc.2017.2764741⟩. ⟨hal-01753194⟩
69 Consultations
157 Téléchargements

Altmetric

Partager

Gmail Facebook X LinkedIn More