M. Hill, Engineering residual stress in aerospace forgings, Materials Research Proceedings, pp.61-66, 2016.

A. Cox, J. Villain-chastre, S. Turner, and M. Jackson, The Effect of Finish Milling on the Surface Integrity and Subsurface Microstructure in Ti-5Al-5Mo-5V-3Cr, 13th World Conference on Titanium, 2015.
DOI : 10.1016/j.jmatprotec.2008.06.020

E. Aeby-gautier, A. Settefrati, F. Bruneseaux, B. Appolaire, B. Denand et al., Isothermal ????? formation in ?? metastable titanium alloys, Journal of Alloys and Compounds, vol.577, pp.439-443, 2013.
DOI : 10.1016/j.jallcom.2012.02.046
URL : https://hal.archives-ouvertes.fr/hal-01293812

N. Guillemot, C. Lartigue, R. Billardon, and B. Mawussi, Prediction of the endurance limit taking account of the microgeometry after finishing milling, International Journal on Interactive Design and Manufacturing (IJIDeM), vol.27, issue.2, pp.239-249, 2010.
DOI : 10.1177/002199839903300201

A. Souto-lebel, N. Guillemot, C. Lartigue, and R. Billardon, Characterization and influence of defect size distribution induced by ball-end finishing milling on fatigue life, 1st CIRP Conference on Surface Integrity (CSI), pp.343-348, 2011.
DOI : 10.1016/j.proeng.2011.11.123

A. E837-13a, Standard test method for determining residual stresses by the hole-drilling strain-gage method, 2015.

M. Prime, Cross-Sectional Mapping of Residual Stresses by Measuring the Surface Contour After a Cut, Journal of Engineering Materials and Technology, vol.31, issue.2, pp.162-168, 2001.
DOI : 10.1243/03093247V313177

E. C. Reed-reed and J. A. Viens, The Influence of Surface Residual Stress on Fatigue Limit of Titanium, Journal of Engineering for Industry, vol.82, issue.1, pp.82-76, 1960.
DOI : 10.1115/1.3663004

M. E. Fitzpatrick, A. T. Fry, P. Holdway, F. A. Kandil, J. Shackleton et al., Determination of residual stresses by x-ray diffraction -issue 2, pp.1744-3911, 2005.

S. Freour, D. Gloaguen, M. François, R. Guillen, and E. Girard, Determination of the macroscopic elastic constants of a phase embedded in a multiphase polycrystal -application to the beta-phase of Ti17 titanium based alloy, Materials Science Forum, pp.404-407723, 2002.
URL : https://hal.archives-ouvertes.fr/hal-01006729

B. D. Cullity, Elements of X-Ray Diffraction, American Journal of Physics, vol.25, issue.6, p.394, 1957.
DOI : 10.1119/1.1934486

V. Hauk, Structural and Residual Stress Analysis by Non Destructive Methods: Evaluation, Application, Assessment, 1997.

W. Pfeiffer and E. Reisacher, Evaluation of thickness and residual stress of shallow surface regions from diffraction profiles, Materials Research Proceedings, issue.2, pp.317-322, 2016.

F. Lefebvre, M. François, J. Cacot, C. Hemery, P. Le-bec et al., External Reference Samples for Residual Stress Analysis by X-Ray Diffraction, Materials Science Forum, vol.681, pp.215-222, 2011.
DOI : 10.4028/www.scientific.net/MSF.681.215

L. Suominen, T. Rickert, and S. Send, Residual Stress Measurement of Ti-Metal Samples by Means of XRD with Ti and Cu Radiation, Materials Research Proceedings, issue.2, pp.61-66, 2016.

P. Withers, M. Daymondb, and M. W. Johnsonb, The precision of diffraction peak location, Journal of Applied Crystallography, vol.34, issue.6, pp.737-743, 2001.
DOI : 10.1107/S002188980101411X

I. C. Noyan and J. B. Cohen, Residual Stresses: Measurements by Diffraction and Interpretation, 1987.

G. Geandier, P. Renault, E. Le-bourhis, . Ph, D. Goudeau et al., Elastic strain distribution in metallic filmpolymer substrate composites, Appl. Phys. Lett, vol.96, 2010.
URL : https://hal.archives-ouvertes.fr/hal-01537626

G. Geandier, D. Thiaudì-ere, R. N. Randriamazaoro, R. Chiron, S. Djaziri et al., characterization of thin films mechanical response, Review of Scientific Instruments, vol.9, issue.10, p.81, 2010.
DOI : 10.1063/1.1591081
URL : https://hal.archives-ouvertes.fr/hal-00624448

M. Rekik, O. Hubert, L. Daniel, B. Raka, P. Mella et al., Dispositif de mesure du comportement magnéto-mécanique d'un alliage de fer-silicium sous chargement mécanique multiaxial, Congrès Français de Mécanique, 2013.

M. A. Sutton, J. J. Orteu, and H. Schreier, Image correlation for shape, motion and deformation measurements: Basic Concepts, Theory and Applications, 2009.
URL : https://hal.archives-ouvertes.fr/hal-01729219

S. Djaziri, P. O. Renault, F. Hild, E. Le-bourhis, P. Goudeau et al., Combined synchrotron X-ray and image-correlation analyses of biaxially deformed W/Cu nanocomposite thin films on Kapton, Journal of Applied Crystallography, vol.157, issue.236, pp.1071-1079, 2011.
DOI : 10.1016/S0257-8972(02)00154-8

S. Djaziri, D. Faurie, E. Le-bourhis, . Ph, P. O. Goudeau et al., Deformation modes of nanostructured thin film under controlled biaxial deformation, Thin Solid Films, vol.530, pp.30-34, 2013.
DOI : 10.1016/j.tsf.2012.05.051
URL : https://hal.archives-ouvertes.fr/hal-00947392

F. Hild and S. Roux, Digital Image Correlation: from Displacement Measurement to Identification of Elastic Properties - a Review, Strain, vol.334, issue.Srie I, pp.69-80, 2006.
DOI : 10.1016/j.crme.2005.11.002
URL : https://hal.archives-ouvertes.fr/hal-00013816

S. Roux and F. Hild, Stress intensity factor measurements from digital image correlation: post-processing and integrated approaches, International Journal of Fracture, vol.40, issue.1, pp.1-4141, 2006.
DOI : 10.1117/12.7976778
URL : https://hal.archives-ouvertes.fr/hal-00013818

H. Leclerc, J. N. Périé, S. Roux, and F. Hild, Integrated Digital Image Correlation for the Identification of Mechanical Properties, LNCS, vol.44, issue.13, pp.161-171, 2009.
DOI : 10.1016/j.ijsolstr.2006.11.024

J. Réthoré, A fully integrated noise robust strategy for the identification of constitutive laws from digital images, International Journal for Numerical Methods in Engineering, vol.199, issue.21-22, pp.631-660, 2010.
DOI : 10.1002/nme.2908

J. Réthoré, T. Muhibullah, M. Elguedj, P. Coret, A. Chaudet et al., Robust identification of elasto-plastic constitutive law parameters from digital images using 3D kinematics, International Journal of Solids and Structures, vol.50, issue.1, pp.73-85, 2013.
DOI : 10.1016/j.ijsolstr.2012.09.002

B. Beaubier, J. E. Dufour, F. Hild, S. Roux, S. Lavernhe-taillard et al., CAD-Based Calibration of a 3D DIC System, Exp. Mech, vol.54, issue.3, pp.329-341, 2014.
DOI : 10.1007/978-1-4614-4235-6_32
URL : https://hal.archives-ouvertes.fr/hal-00727879

J. Dufour, B. Beaubier, F. Hild, and S. Roux, CAD-based Displacement Measurements with Stereo-DIC, Experimental Mechanics, vol.13, issue.9, pp.1657-1668, 2015.
DOI : 10.1177/0309324715592530
URL : https://hal.archives-ouvertes.fr/hal-01198947

J. Dufour, F. Hild, and S. Roux, Shape, displacement and mechanical properties from isogeometric multiview stereocorrelation, The Journal of Strain Analysis for Engineering Design, vol.50, issue.7, pp.470-487, 2015.
DOI : 10.1007/s00138-013-0495-z
URL : https://hal.archives-ouvertes.fr/hal-01198921

F. Hild, A. Bouterf, L. Chamoin, F. Mathieu, J. Neggers et al., Toward 4D mechanical correlation, Advanced Modeling and Simulation in Engineering Sciences, vol.51, issue.2, pp.1-26, 2016.
DOI : 10.1177/0309324715614759
URL : https://hal.archives-ouvertes.fr/hal-01310582

R. Boyer and R. Briggs, The Use of ?? Titanium Alloys in the Aerospace Industry, Journal of Materials Engineering and Performance, vol.14, issue.6, pp.681-685, 2005.
DOI : 10.1361/105994905X75448

J. Lu, Handbook of measurement of residual stresses. Society for Experimental Mechanics, 1996.

B. Voillot, F. Hild, J. L. Lebrun, and R. Billardon, Evaluation Via XRD of Residual Stresses Due to Mechanical Treatment of Ti5553 Alloy, 13th World Conference on Titanium, 2015.
DOI : 10.1007/s10704-006-6631-2
URL : https://hal.archives-ouvertes.fr/hal-01674783

T. Duval, P. Villechaise, and S. Andrieu, Mechanical Properties and Strain Mechanisms Analysis in Ti5553 Titanium Alloy. The Minerals, Metals & Materials Society, 2011.

B. Voillot, P. Aimedieu, P. Mella, J. L. Lebrun, and F. Hild, Evaluation des contraintes residuelles induites par traitements mecaniques dans un alliage de titane bi-phase par trois methodes de depouillement differentes, Congrès Mécamat, 2015.

M. Bertin, F. Hild, S. Roux, F. Mathieu, H. Leclerc et al., Integrated digital image correlation applied to elastoplastic identification in a biaxial experiment, The Journal of Strain Analysis for Engineering Design, vol.51, issue.2, pp.118-131, 2016.
DOI : 10.1007/s11340-012-9603-7
URL : https://hal.archives-ouvertes.fr/hal-01303519

C. Leyens and M. Peters, Titanium and titanium alloys: fundamentals and applications, 2003.
DOI : 10.1002/3527602119

S. Fréour, D. Gloaguen, M. François, and R. Guillen, Influence of a two-phase microstructure on XEC and XRD stress analysis, Revue de M??tallurgie, vol.100, issue.12, pp.1185-1191, 2003.
DOI : 10.1051/metal:2003187

G. Bruno and B. D. Dunn, Surface and Bulk Residual Stress in Ti6Al4V Welded Aerospace Tanks, Journal of Pressure Vessel Technology, vol.93, issue.349, pp.284-292, 2004.
DOI : 10.3139/146.020033

F. Hild and S. Roux, Digital Image Correlation, pp.183-228
URL : https://hal.archives-ouvertes.fr/hal-01728998

I. Iec, International Vocabulary of Metrology -Basic and General Concepts and Associated Terms, VIM. International Organization for Standardization, pp.99-111, 2007.

G. Martin, Simulation numerique multi-echelles du comportement mecanique des alliages de titane betametastable Ti5553 et Ti17, 2012.
URL : https://hal.archives-ouvertes.fr/pastel-00873129

S. Fréour, E. Lacoste, M. François, and R. Guillén, Determining Ti-17 ??-Phase Single-Crystal Elasticity Constants through X-Ray Diffraction and Inverse Scale Transition Model, Materials Science Forum, vol.681, pp.97-102, 2011.
DOI : 10.4028/www.scientific.net/MSF.681.97

M. Herbig, D short fatigue crack investigation in beta titanium alloys using phase and diffraction contrast tomography, 2011.
URL : https://hal.archives-ouvertes.fr/tel-00690521