L. Tang and J. L. Kardos, A review of methods for improving the interfacial adhesion between carbon fiber and polymer matrix, Polymer Composites, vol.16, issue.1, pp.100-113, 1997.
DOI : 10.1002/polc.5070280113

M. Sharma, S. Gao, E. Mäder, H. Sharma, L. Y. Wei et al., Carbon fiber surfaces and composite interphases, Composites Science and Technology, vol.102, pp.35-50, 2014.
DOI : 10.1016/j.compscitech.2014.07.005

A. Paipetis and C. Galiotis, Effect of fibre sizing on the stress transfer efficiency in carbon/epoxy model composites, Composites Part A: Applied Science and Manufacturing, vol.27, issue.9, pp.27-755, 1996.
DOI : 10.1016/1359-835X(96)00054-1

M. R. Piggott, The interface in carbon fibre composites, Carbon, vol.27, issue.5, pp.657-662, 1989.
DOI : 10.1016/0008-6223(89)90199-1

M. A. Montes-moran, A. Martinez-alonso, J. M. Tascon, M. C. Paiva, and C. A. Bernardo, Effects of plasma oxidation on the surface and interfacial properties of carbon fibres/polycarbonate composites, Carbon, vol.39, issue.7, pp.39-1057, 2001.
DOI : 10.1016/S0008-6223(00)00220-7

G. Bogeava-gaceva, E. Mäder, L. Haüssler, and K. , Parameters affecting the interface properties in carbon fibre/epoxy systems, Composites, vol.26, issue.2, pp.103-107, 1995.
DOI : 10.1016/0010-4361(95)90409-S

M. Guigon and E. Kilinklin, The interface and interphase in carbone fibre reinforced composites, Composites, vol.27, issue.7, pp.534-539, 1994.

T. H. Cheng, J. Zhang, S. Yumitori, F. R. Jones, and C. W. Anderson, Sizing resin structure and interphase formation in carbon fibre composites, Composites, vol.25, issue.7, pp.25-32, 1994.
DOI : 10.1016/0010-4361(94)90199-6

N. Dilsiz and J. P. Wightman, Surface analysis of unsized and sized carbon fiber, Carbon, pp.37-1105, 1999.

F. Gnädinger, P. Middendorf, and B. Fox, Interfacial shear strength studies of experimental carbon fibres, novel thermosetting polyurethane and epoxy matrices and bespoke sizing agents, Composites Science and Technology, vol.133, pp.104-110, 2016.
DOI : 10.1016/j.compscitech.2016.07.029

N. S. Broyles, K. N. Verghese, S. V. Davis, H. Li, R. M. Davis et al., Fatigue performance of carbon fibre/vinyl ester composites: the effect of two dissimilar polymeric sizing agents, Polymer, vol.39, issue.15, pp.39-3417, 1998.
DOI : 10.1016/S0032-3861(97)10078-7

M. A. Downey and L. T. , Toughening of carbon fiber-reinforced epoxy polymer composites utilizing fiber surface treatment and sizing, Composites Part A: Applied Science and Manufacturing, vol.90, pp.687-698, 2016.
DOI : 10.1016/j.compositesa.2016.09.005

M. Decrette, M. Sabri, J. Osselin, and J. Drean, Jacquard UNIVAL 100 parameters study for high-density weaving optimization, Journal of Industrial Textiles, vol.45, issue.6, pp.1603-1618, 2015.

M. Lefebvre, F. Boussu, and D. Coutellier, Influence of high-performance yarns degradation inside three-dimensional warp interlock fabric, Journal of Industrial Textiles, vol.45, issue.6, pp.475-488, 2013.
DOI : 10.1016/0956-7151(95)00057-3

H. Lee, K. H. Leong, and I. Herzzberg, Effect of Weaving on the Tensile Properties of Carbon Fibre Tows and Woven Composites, Journal of Reinforced Plastics and Composites, vol.20, issue.8, pp.652-670, 2001.
DOI : 10.1016/S1359-835X(99)00033-0

S. Rudov-clark, A. P. Mouritz, H. Lee, and M. K. Bannister, Fibre damage in the manufacture of advanced three-dimensional woven composites, Composites Part A: Applied Science and Manufacturing, vol.34, issue.10, pp.963-970, 2003.
DOI : 10.1016/S1359-835X(03)00213-6

P. Boisse, K. Buet, A. Gasser, and J. Launay, Meso/macro-mechanical behaviour of textile reinforcements for thin composites, Composites Science and Technology, vol.61, issue.3, pp.61-395, 2001.
DOI : 10.1016/S0266-3538(00)00096-8

Q. T. Nguyen, E. Vidal-sallé, P. Boisse, C. H. Park, A. Saouab et al., Mesoscopic scale analyses of textile composite reinforcement compaction, Composites Part B: Engineering, vol.44, issue.1, pp.231-241, 2013.
DOI : 10.1016/j.compositesb.2012.05.028
URL : https://hal.archives-ouvertes.fr/hal-00785596

S. Bel, N. Hamila, P. Boisse, and F. Dumont, Finite element model for NCF composite reinforcement preforming: Importance of inter-ply sliding, Composites Part A: Applied Science and Manufacturing, vol.43, issue.12, pp.2269-2277, 2012.
DOI : 10.1016/j.compositesa.2012.08.005
URL : https://hal.archives-ouvertes.fr/hal-00934514

P. Boisse, B. Zouari, and A. Gasser, A mesoscopic approach for the simulation of woven fibre composite forming, Composites Science and Technology, vol.65, issue.3-4, pp.429-436, 2005.
DOI : 10.1016/j.compscitech.2004.09.024
URL : https://hal.archives-ouvertes.fr/hal-00368438

S. Gatouillat, A. Bareggi, E. Vidal-sallé, and P. Boisse, Meso modelling for composite preform shaping ??? Simulation of the loss of cohesion of the woven fibre network, Composites Part A: Applied Science and Manufacturing, vol.54, pp.134-144, 2013.
DOI : 10.1016/j.compositesa.2013.07.010
URL : https://hal.archives-ouvertes.fr/hal-00934559

B. Cornelissen, B. Rietman, and R. Akkerman, Frictional behaviour of high performance fibrous tows: Friction experiments, Composites Part A: Applied Science and Manufacturing, vol.44, pp.95-104, 2013.
DOI : 10.1016/j.compositesa.2012.08.024

J. Renaud, N. Vernet, E. Ruiz, L. Lebel, and L. , Creep compaction behavior of 3D carbon interlock fabrics with lubrication and temperature, Composites Part A: Applied Science and Manufacturing, vol.86, pp.87-96
DOI : 10.1016/j.compositesa.2016.04.017

A. Kafi, M. Huson, C. Creighton, J. Khoo, L. Mazzola et al., Effect of surface functionality of PAN-based carbon fibres on the mechanical performance of carbon/epoxy composites, Composites Science and Technology, pp.94-89, 2014.

I. C. Roselman and D. Tabor, The friction of carbon fibres, Journal of Physics D: Applied Physics, vol.9, issue.17, pp.2517-2532, 1976.
DOI : 10.1088/0022-3727/9/17/012

M. Tourlonias, M. Bueno, and D. Poquillon, Friction of carbon tows and fine single fibres, Composites Part A: Applied Science and Manufacturing, vol.98, pp.116-123, 2017.
DOI : 10.1016/j.compositesa.2017.03.017

M. Tourlonias and M. Bueno, Experimental simulation of friction and wear of carbon yarns during the weaving process, Composites Part A: Applied Science and Manufacturing, vol.80, pp.228-236, 2016.
DOI : 10.1016/j.compositesa.2015.07.024

N. D. Chakladar, P. Mandal, and P. Potluri, Effects of inter-tow angle and tow size on carbon fibre friction, Composites Part A: Applied Science and Manufacturing, vol.65, pp.115-124, 2014.
DOI : 10.1016/j.compositesa.2014.06.002