I. Abaqus, ABAQUS Theory guide : version 6

J. P. Arrazola, I. Arriola, and M. A. Davies, Analysis of the influence of tool type, coatings, and machinability on the thermal fields in orthogonal machining of AISI 4140 steels, CIRP Annals, vol.58, issue.1, pp.85-88, 2009.
DOI : 10.1016/j.cirp.2009.03.085

P. J. Arrazola, I. Arriola, M. A. Davies, A. L. Cooke, and B. S. Dutterer, The effect of machinability on thermal fields in orthogonal cutting of AISI 4140 steel, CIRP Annals, vol.57, issue.1, pp.65-68, 2008.
DOI : 10.1016/j.cirp.2008.03.139

I. Arriola, E. Whitenton, J. Heigel, and P. J. Arrazola, Relationship between machinability index and in-process parameters during orthogonal cutting of steels, CIRP Annals, vol.60, issue.1, pp.93-96, 2011.
DOI : 10.1016/j.cirp.2011.03.082

T. Baizeau, S. Campocasso, G. Fromentin, F. Rossi, and G. Poulachon, Effect of Rake Angle on Strain Field During Orthogonal Cutting of Hardened Steel with c-BN Tools, Procedia CIRP, vol.31, pp.166-171, 2015.
DOI : 10.1016/j.procir.2015.03.089
URL : https://hal.archives-ouvertes.fr/hal-01163887

D. Basak, R. A. Overfelt, and D. Wang, Measurement of Specific Heat Capacity and Electrical Resistivity of Industrial Alloys Using Pulse Heating Techniques, International Journal of Thermophysics, vol.24, issue.6, pp.1721-1733, 2003.
DOI : 10.1023/B:IJOT.0000004101.88449.86

M. Boivineau, C. Cagran, D. Doytier, V. Eyraud, M. H. Nadal et al., Thermophysical Properties of Solid and Liquid Ti-6Al-4V (TA6V) Alloy, International Journal of Thermophysics, vol.14, issue.-207, pp.507-529, 2006.
DOI : 10.6028/jres.075A.001

M. Bornert, F. Brémand, P. Doumalin, M. Dupré, J. Fazzini et al., Assessment of Digital Image Correlation Measurement Errors: Methodology and Results, Experimental Mechanics, vol.43, issue.4, pp.353-370, 2008.
DOI : 10.1117/12.7972925
URL : https://hal.archives-ouvertes.fr/hal-00881043

T. Boulanger, A. Chrysochoos, C. Mabru, and A. Galtier, Calorimetric analysis of dissipative and thermoelastic effects associated with the fatigue behavior of steels, International Journal of Fatigue, vol.26, issue.3, pp.221-229, 2004.
DOI : 10.1016/S0142-1123(03)00171-3

J. Buda, New methods in the study of plastic deformation in the cutting zone, CIRP Annals, vol.21, pp.17-18, 1972.

S. L. Cai, Y. Chen, G. G. Ye, M. Q. Jiang, W. H. et al., Characterization of the deformation field in large-strain extrusion machining, Journal of Materials Processing Technology, vol.216, pp.48-58, 2015.
DOI : 10.1016/j.jmatprotec.2014.08.022

M. Calamaz, D. Coupard, and F. Girot, A new material model for 2D numerical simulation of serrated chip formation when machining titanium alloy Ti???6Al???4V, International Journal of Machine Tools and Manufacture, vol.48, issue.3-4, pp.3-4275, 2008.
DOI : 10.1016/j.ijmachtools.2007.10.014
URL : https://hal.archives-ouvertes.fr/hal-00911076

M. Calamaz, D. Coupard, and F. Girot, Strain Field Measurement in Orthogonal Machining of a Titanium Alloy, Advanced Materials Research, vol.498, pp.237-242, 2012.
DOI : 10.4028/www.scientific.net/AMR.498.237
URL : https://hal.archives-ouvertes.fr/hal-00911094

A. Chrysochoos and H. Louche, An infrared image processing to analyse the calorific effects accompanying strain localisation, International Journal of Engineering Science, vol.38, issue.16, pp.1759-1788, 2000.
DOI : 10.1016/S0020-7225(00)00002-1

C. Courbon, T. Mabrouki, J. Rech, D. Mazuyer, F. Perrard et al., Further insight into the chip formation of ferritic-pearlitic steels: Microstructural evolutions and associated thermo-mechanical loadings, International Journal of Machine Tools and Manufacture, vol.77, pp.34-46, 2014.
DOI : 10.1016/j.ijmachtools.2013.10.010
URL : https://hal.archives-ouvertes.fr/hal-00938538

M. A. Davies, A. L. Cooke, and E. R. Larsen, High Bandwidth Thermal Microscopy of Machining AISI 1045 Steel, CIRP Annals, vol.54, issue.1, pp.63-66, 2005.
DOI : 10.1016/S0007-8506(07)60050-X

E. P. Gnanamanickam, S. Lee, J. P. Sullivan, and S. Chandrasekar, Direct measurement of large-strain deformation fields by particle tracking, Measurement Science and Technology, vol.20, issue.9, p.95710, 2009.
DOI : 10.1088/0957-0233/20/9/095710

L. González-fernández, E. Risueño, R. B. Pérez-sáez, and M. J. Tello, Infrared normal spectral emissivity of Ti???6Al???4V alloy in the 500???1150K temperature range, Journal of Alloys and Compounds, vol.541, pp.144-149, 2012.
DOI : 10.1016/j.jallcom.2012.06.117

A. Guery, F. Hild, F. Latourte, S. Roux-efe, W. Moscoso et al., Slip activities in polycrystals determined by coupling DIC measurements with crystal plasticity calculations, International Journal of Plasticity, vol.81, issue.66, pp.249-266235, 2012.
DOI : 10.1016/j.ijplas.2016.01.008
URL : https://hal.archives-ouvertes.fr/hal-01303523

Y. Guo, C. Saldana, W. D. Compton, and S. Chandrasekar, Controlling deformation and microstructure on machined surfaces, Acta Materialia, vol.59, issue.11, pp.4538-4547, 2011.
DOI : 10.1016/j.actamat.2011.03.076

B. Haddag, S. Atlati, M. Nouari, and M. Zenasni, Analysis of the heat transfer at the tool???workpiece interface in machining: determination of heat generation and heat transfer coefficients, Heat and Mass Transfer, vol.25, issue.10, pp.1355-1370, 2015.
DOI : 10.1016/j.ijplas.2008.12.013
URL : https://hal.archives-ouvertes.fr/hal-01417918

M. Harzallah, T. Pottier, J. Senatore, M. Mousseigne, G. Germain et al., Numerical and experimental investigations of Ti-6Al-4V chip generation and thermo-mechanical couplings in orthogonal cutting, International Journal of Mechanical Sciences, vol.134, pp.189-202, 2017.
DOI : 10.1016/j.ijmecsci.2017.10.017
URL : https://hal.archives-ouvertes.fr/hal-01622231

J. C. Heigel, E. Whitenton, B. Lane, M. A. Donmez, V. Madhavan et al., Infrared measurement of the temperature at the tool???chip interface while machining Ti???6Al???4V, Journal of Materials Processing Technology, vol.243, pp.123-130, 2017.
DOI : 10.1016/j.jmatprotec.2016.11.026

E. Héripré, M. Dexet, J. Crépin, L. Gélébart, A. Roos et al., Coupling between experimental measurements and polycrystal finite element calculations for micromechanical study of metallic materials, International Journal of Plasticity, vol.23, issue.9, pp.1512-1539, 2007.
DOI : 10.1016/j.ijplas.2007.01.009

A. Hijazi and V. Madhavan, A novel ultra-high speed camera for digital image processing applications, Measurement Science and Technology, vol.19, issue.8, pp.1-11, 2008.
DOI : 10.1088/0957-0233/19/8/085503

A. Içöz, L. Patriarca, M. Filippini, and S. Beretta, Strain Accumulation in TiAl Intermetallics via High-resolution Digital Image Correlation (DIC), Procedia Engineering, vol.74, pp.443-448, 2014.
DOI : 10.1016/j.proeng.2014.06.295

S. P. Jaspers and J. Dautzenberg, Material behaviour in metal cutting: strains, strain rates and temperatures in chip formation, Journal of Materials Processing Technology, vol.121, issue.1, pp.123-135, 2002.
DOI : 10.1016/S0924-0136(01)01227-4

A. Justice, I. E. Gunduz, and S. F. Son, Microscopic two-color infrared imaging of nial reactive particles and pellets. Thin Solid Films, The 43rd International Conference on Metallurgical Coatings and Thin Films, 2016.
DOI : 10.1016/j.tsf.2016.07.090

R. V. Kazban, K. M. Vernaza, J. J. Peña, and . Mason, Measurements of Forces and Temperature Fields in High-Speed Machining of 6061-T6 Aluminum Alloy, Experimental Mechanics, vol.128, issue.3, pp.307-317, 2008.
DOI : 10.1115/1.3408771

F. Klocke, D. Lung, S. Buchkremer, and I. S. Jawahir, From Orthogonal Cutting Experiments towards Easy-to-Implement and Accurate Flow Stress Data, Materials and Manufacturing Processes, vol.96, issue.2, pp.1222-1227, 2013.
DOI : 10.1016/j.ijmachtools.2006.06.006

R. Komanduri and R. H. Brown, On the Mechanics of Chip Segmentation In Machining, Journal of Engineering for Industry, vol.103, issue.1, pp.33-51, 1981.
DOI : 10.1115/1.3184458

R. Komanduri, T. Schroeder, J. Harza, B. Turkovich, and D. Flom, On the Catastrophic Shear Instability in High-Speed Machining of an AISI 4340 Steel, Journal of Engineering for Industry, vol.104, issue.2, pp.121-131, 1982.
DOI : 10.1115/1.3185807

F. Kone, C. Czarnota, B. Haddag, and M. Nouari, Finite element modelling of the thermo-mechanical behavior of coatings under extreme contact loading in dry machining, Surface and Coatings Technology, vol.205, issue.12, pp.3559-3566, 2011.
DOI : 10.1016/j.surfcoat.2010.12.024

T. Mabrouki and J. , A contribution to a qualitative understanding of thermo-mechanical effects during chip formation in hard turning, Journal of Materials Processing Technology, vol.176, issue.1-3, pp.214-221, 2006.
DOI : 10.1016/j.jmatprotec.2006.03.159
URL : https://hal.archives-ouvertes.fr/hal-00938632

J. J. Mason, A. J. Rosakis, and G. Ravichandran, On the strain and strain rate dependence of the fraction of plastic work converted to heat: an experimental study using high speed infrared detectors and the Kolsky bar, Mechanics of Materials, vol.17, issue.2-3, pp.135-145, 1994.
DOI : 10.1016/0167-6636(94)90054-X

B. Pan, Z. Lu, and H. Xie, Mean intensity gradient: An effective global parameter for quality assessment of the speckle patterns used in digital image correlation, Optics and Lasers in Engineering, vol.48, issue.4, pp.469-477, 2010.
DOI : 10.1016/j.optlaseng.2009.08.010

B. Pan, H. Xie, Z. Wang, K. Qian, and Z. Wang, Study on subset size selection in digital image correlation for speckle patterns, Optics Express, vol.16, issue.10, pp.7037-7048, 2008.
DOI : 10.1364/OE.16.007037

B. Pan, W. Dafang, and X. Yong, Incremental calculation for large deformation measurement using reliability-guided digital image correlation, Optics and Lasers in Engineering, vol.50, issue.4, pp.586-592, 2012.
DOI : 10.1016/j.optlaseng.2011.05.005

A. Perrier, F. Touchard, L. Chocinski-arnault, and D. Mellier, Mechanical behaviour analysis of the interface in single hemp yarn composites: DIC measurements and FEM calculations, Polymer Testing, vol.52, pp.1-8, 2016.
DOI : 10.1016/j.polymertesting.2016.03.019

J. Pierré, J. Passieux, J. Périé, F. Bugarin, and L. Robert, Unstructured finite element-based digital image correlation with enhanced management of quadrature and lens distortions, Optics and Lasers in Engineering, vol.77, pp.44-53, 2016.
DOI : 10.1016/j.optlaseng.2015.07.008

T. Pottier, G. Germain, M. Calamaz, A. Morel, and D. Coupard, Sub-Millimeter Measurement of Finite Strains at Cutting Tool Tip Vicinity, Experimental Mechanics, vol.174, issue.1???2, pp.1031-1042, 2014.
DOI : 10.1016/j.jmatprotec.2006.01.012
URL : https://hal.archives-ouvertes.fr/hal-01022455

T. Pottier, H. Louche, S. Samper, H. Favreliére, F. Toussaint et al., Proposition of a modal filtering method to enhance heat source computation within heterogeneous thermomechanical problems, International Journal of Engineering Science, vol.81, pp.163-176, 2014.
DOI : 10.1016/j.ijengsci.2014.04.010
URL : https://hal.archives-ouvertes.fr/hal-00995121

T. Pottier, M. Moutrille, J. Le-cam, X. Balandraud, M. G. Pina et al., Study on the use of motion compensation techniques to determine heat sources. Application to large deformations on cracked rubber specimens Temperature measurement by visible pyrometry: Orthogonal cutting application, Experimental Mechanics J. Heat Transfer, vol.49, issue.1266, pp.561-574931, 2003.
URL : https://hal.archives-ouvertes.fr/hal-00454679

M. Romano, M. Ryu, J. Morikawa, J. C. Batsale, and C. Pradere, Simultaneous microscopic measurements of thermal and spectroscopic fields of a phase change material, Infrared Physics & Technology, vol.76, pp.65-71, 2016.
DOI : 10.1016/j.infrared.2016.01.010

T. Sakagami, T. Nishimura, T. Yamaguchi, and N. Kubo, A new full-field motion compensation technique for infrared stress measurement using digital image correlation, The Journal of Strain Analysis for Engineering Design, vol.43, issue.6, pp.539-549, 2008.
DOI : 10.1007/BF02321405

T. Sentenac and R. Gilblas, Noise effect on interpolation equation for neai infrared thermography. Metrologia, 2013.
DOI : 10.1088/0026-1394/50/3/208

J. C. Stinville, M. P. Echlin, D. Texier, F. Bridier, P. Bocher et al., Sub-Grain Scale Digital Image Correlation by Electron Microscopy for Polycrystalline Materials during Elastic and Plastic Deformation, Experimental Mechanics, vol.3, issue.1, pp.197-216, 2016.
DOI : 10.1186/s40192-014-0021-9
URL : https://hal.archives-ouvertes.fr/hal-01644841

S. Sun, M. Brandt, and M. S. Dargusch, Characteristics of cutting forces and chip formation in machining of titanium alloys, International Journal of Machine Tools and Manufacture, vol.49, issue.7-8, pp.561-568, 2009.
DOI : 10.1016/j.ijmachtools.2009.02.008

G. Sutter, L. Faure, A. Molinari, N. Ranc, and V. Pina, An experimental technique for the measurement of temperature fields for the orthogonal cutting in high speed machining, International Journal of Machine Tools and Manufacture, vol.43, issue.7, pp.671-678, 2003.
DOI : 10.1016/S0890-6955(03)00037-3
URL : https://hal.archives-ouvertes.fr/hal-00283393

Z. Tang, J. Liang, Z. Xiao, and C. Guo, Large deformation measurement scheme for 3D digital image correlation method, Optics and Lasers in Engineering, vol.50, issue.2, pp.122-130, 2012.
DOI : 10.1016/j.optlaseng.2011.09.018

K. Triconnet, K. Derrien, F. Hild, and D. Baptiste, Parameter choice for optimized digital image correlation, Optics and Lasers in Engineering, vol.47, issue.6, pp.728-737, 2009.
DOI : 10.1016/j.optlaseng.2008.10.015
URL : https://hal.archives-ouvertes.fr/hal-00334368

A. Ugarte, M. Rachid, A. Saoubi, P. J. Garay, and . Arrazola, Machining Behaviour of Ti-6Al-4V and Ti-5553 All0oys in Interrupted Cutting with PVD Coated Cemented carbide, Fifth CIRP Conference on High Performance Cutting 2012, pp.202-207, 2012.
DOI : 10.1016/j.procir.2012.04.035

P. Vacher, S. Dumoulin, F. Morestin, and S. , Bidimensional strain measurement using digital images, Proc. Inst, pp.811-817, 1999.
DOI : 10.1117/12.166931

F. Valiorgue, A. Brosse, P. Naisson, J. Rech, H. Hamdi et al., Emissivity calibration for temperatures measurement using thermography in the context of machining, Applied Thermal Engineering, vol.58, issue.1-2, pp.321-326, 2013.
DOI : 10.1016/j.applthermaleng.2013.03.051

V. Wagner, A. Vissio, E. Duc, and M. Pijolat, Relationship between cutting conditions and chips morphology during milling of aluminium Al-2050, The International Journal of Advanced Manufacturing Technology, vol.14, issue.2, pp.1881-1897, 2016.
DOI : 10.1016/S0007-8506(07)62531-1
URL : https://hal.archives-ouvertes.fr/hal-01179080

Q. Wang, Z. Liu, B. Wang, Q. Song, and Y. Wan, Evolutions of grain size and micro-hardness during chip formation and machined surface generation for Ti-6Al-4V in high-speed machining, The International Journal of Advanced Manufacturing Technology, vol.365, issue.9-12, pp.1725-1736, 2016.
DOI : 10.1016/j.msea.2003.09.024

J. Weng, P. Cohen, and M. Herniou, Camera calibration with distortion models and accuracy evaluation, IEEE Transactions on Pattern Analysis and Machine Intelligence, vol.14, issue.10, pp.965-980, 1992.
DOI : 10.1109/34.159901

E. P. Whitenton, H. W. Yoon, D. W. Allen, and R. D. Saunders, An introduction for machining researchers to measurement uncertainty sources in thermal images of metal cutting, International Journal of Machining and Machinability of Materials, vol.12, issue.3, pp.195-21489, 2005.
DOI : 10.1504/IJMMM.2012.049255

F. Zemzemi, J. Rech, W. B. Salem, A. Dogui, and P. Kapsa, Identification of a friction model at tool/chip/workpiece interfaces in dry machining of AISI4142 treated steels, Journal of Materials Processing Technology, vol.209, issue.8, pp.3978-3990, 2009.
DOI : 10.1016/j.jmatprotec.2008.09.019

D. Zhang, H. Zhading, and H. Ding, A Study on the Orthogonal Cutting Mechanism Based on Experimental Determined Displacement and Temperature Fields, Procedia CIRP, vol.46, pp.35-38, 2016.
DOI : 10.1016/j.procir.2016.03.176

X. P. Zhang, R. Shivpuri, and A. K. Srivastava, Role of phase transformation in chip segmentation during high speed machining of dual phase titanium alloys, Journal of Materials Processing Technology, vol.214, issue.12, pp.3048-3066, 2014.
DOI : 10.1016/j.jmatprotec.2014.07.007