M. Alden, A. Omrane, M. Richter, and G. Sarner, Thermographic phosphors for thermometry: A survey of combustion applications, Progress in Energy and Combustion Science, vol.37, issue.4, pp.422-461, 2011.
DOI : 10.1016/j.pecs.2010.07.001

S. Allison, M. Cates, B. Noel, and G. Gillies, Monitoring permanent-magnet motor heating with phosphor thermometry, IEEE Transactions on Instrumentation and Measurement, vol.37, issue.4, pp.637-641, 1988.
DOI : 10.1109/19.9829

S. Allison and G. Gillies, Remote thermometry with thermographic phosphors: Instrumentation and applications, Review of Scientific Instruments, vol.8, issue.7, pp.2615-2650, 1997.
DOI : 10.1063/1.1145375

B. Atakan and D. Roskosch, Thermographic phosphor thermometry in transient combustion: A theoretical study of heat transfer and accuracy, Proceedings of the Combustion Institute, vol.34, issue.2, pp.3603-3610, 2013.
DOI : 10.1016/j.proci.2012.05.022

S. Berger, S. Richard, F. Duchaine, G. Staffelbach, and L. Gicquel, On the sensitivity of a helicopter combustor wall temperature to convective and radiative thermal loads, Applied Thermal Engineering, vol.103, pp.1450-1459, 2016.
DOI : 10.1016/j.applthermaleng.2016.04.054

J. Brubach, J. Feist, and A. Dreizler, Characterization of manganese-activated magnesium fluorogermanate with regards to thermographic phosphor thermometry, Measurement Science and Technology, vol.19, issue.2, pp.602-613, 2008.
DOI : 10.1088/0957-0233/19/2/025602

J. Brubach, C. Pflitsch, A. Dreizler, and B. Atakan, On surface temperature measurements with thermographic phosphors: A review, Progress in Energy and Combustion Science, vol.39, issue.1, pp.37-60, 2013.
DOI : 10.1016/j.pecs.2012.06.001

M. Chambers and D. Clarke, Doped Oxides for High-Temperature Luminescence and Lifetime Thermometry, Annual Review of Materials Research, vol.39, issue.1, pp.325-359, 2009.
DOI : 10.1146/annurev-matsci-112408-125237

A. Dreizler and B. Bohm, Advanced laser diagnostics for an improved understanding of premixed flame-wall interactions, Proceedings of the Combustion Institute, vol.35, issue.1, pp.37-64, 2015.
DOI : 10.1016/j.proci.2014.08.014

F. Duchaine, A. Corpron, L. Pons, V. Moureau, F. Nicoud et al., Development and assessment of a coupled strategy for conjugate heat transfer with Large Eddy Simulation: Application to a cooled turbine blade, International Journal of Heat and Fluid Flow, vol.30, issue.6, pp.1129-1141, 2009.
DOI : 10.1016/j.ijheatfluidflow.2009.07.004
URL : https://hal.archives-ouvertes.fr/hal-00803384

O. Ezekoye, R. Greif, and D. Lee, Increased surface temperature effects on wall heat transfer during unsteady flame quenching, 24th Symp. (Int.) on Combustion, pp.1465-1472, 1992.
DOI : 10.1016/S0082-0784(06)80171-2

B. Facchini, A. Magi, and A. Greco, Conjugate Heat Transfer Simulation of a Radially Cooled Gas Turbine Vane, Volume 3: Turbo Expo 2004, pp.951-961, 2004.
DOI : 10.1115/GT2004-54213

J. Feist, A. Heyes, and S. Seefeldt, Thermographic phosphors for gas turbines: instrumentation development and measurement uncertainties In: 11th International symposium on application of laser techniques to fluid mechanics Phosphor thermometry: a comparison of the luminescence lifetime and the intensity ratio approach, Proc Combust Inst, vol.34, pp.3611-3618, 2002.

T. Guiberti, D. Durox, P. Scouflaire, and T. Schuller, Impact of heat loss and hydrogen enrichment on the shape of confined swirling flames, Proceedings of the Combustion Institute, vol.35, issue.2, pp.1385-1392, 2015.
DOI : 10.1016/j.proci.2014.06.016
URL : https://hal.archives-ouvertes.fr/hal-01344936

J. Hooker and P. Doorbar, Metal matrix composites for aeroengines, Materials Science and Technology, vol.16, issue.7-8, pp.725-731, 2000.
DOI : 10.1179/026708300101508414

C. Jainski, M. Ribmann, J. Janicka, and A. Dreizler, Sidewall quenching of atmospheric laminar premixed flames studied by laser-based diagnostics, Combustion and Flame, vol.183, pp.271-282, 2017.
DOI : 10.1016/j.combustflame.2017.05.020

J. Kashdan and G. Bruneaux, Laser-induced phosphorescence measurements of combustion chamber surface temperature on a single-cylinder diesel engine Thermographic phosphors for high temperature measurements: principles, current state of the art and recent applications, SAE International Khalid AH, Kontis K Sensors, vol.8, pp.5673-5744, 2008.

C. Knappe, J. Linden, F. Nada, M. Ritcher, and A. M. , Investigation and compensation of the nonlinear response in photomultiplier tubes for quantitative single-shot measurements, Review of Scientific Instruments, vol.43, issue.3, p.34901, 2012.
DOI : 10.1007/s00340-004-1584-5

C. Kraus, L. Selle, T. Poinsot, C. Arndt, and H. Bockhorn, Influence of heat transfer and material temperature on combustion instabilities in a swirl burner, J Eng Gas Turb Power, vol.129, issue.051, p.503, 2017.
URL : https://hal.archives-ouvertes.fr/hal-01688648

K. Lakshmisha, P. Paul, and H. Mukunda, On the flammability limit and heat loss in flames with detailed chemistry, Symposium (international) on combustion, pp.433-440, 1991.
DOI : 10.1016/S0082-0784(06)80288-2

J. Lamouroux, M. Ihme, B. Fiorina, and O. Gicquel, Tabulated chemistry approach for diluted combustion regimes with internal recirculation and heat losses, Combustion and Flame, vol.161, issue.8, pp.2120-2136, 2014.
DOI : 10.1016/j.combustflame.2014.01.015

P. Lawrence, Meeting the challenge of aviation emissions: an aircraft industry perspective, Technology Analysis & Strategic Management, vol.21, issue.1, pp.79-92, 2009.
DOI : 10.1080/09537320802557327

Y. Lee, J. Oh, and Y. Huh, Strong perturbation of the guided light within Y 2 O 3 ? Eu 3+ thin film phosphors coated with twodimensional air-hole photonic crystal arrays, Appl Phys Lett, vol.91, issue.231, p.908, 2007.

A. Lefebvre, &. Taylor, L. Francis, C. Lempereur, R. Andral et al., Gas turbines combustion Surface temperature measurement on engine components by means of irreversible thermal coatings, Meas Sci Technol, vol.19, issue.105, p.501, 1999.

J. Linden, B. Johansson, M. Richter, and A. M. , Investigation of potential laser-induced heating effects when using thermographic phosphors for gas-phase thermometry, Applied Physics B, vol.48, issue.2, pp.237-240, 2009.
DOI : 10.1007/s00340-009-3608-7

J. Lu, O. Ezekoye, R. Greif, and F. Sawyer, Unsteady heat transfer during side wall quenching of a laminar flame, 23rd Symp. (Int.) on Combustion, pp.441-446, 1990.
DOI : 10.1016/S0082-0784(06)80289-4

M. Mann, C. Jainski, M. Euler, B. Bohm, and A. Dreizler, Transient flame???wall interactions: Experimental analysis using spectroscopic temperature and CO concentration measurements, Combustion and Flame, vol.161, issue.9, pp.2371-2386, 2014.
DOI : 10.1016/j.combustflame.2014.02.008

L. Mannick, S. Brown, and S. Campbell, Phosphor-based thermometry of rotating surfaces, Applied Optics, vol.26, issue.18, pp.4014-4017, 1987.
DOI : 10.1364/AO.26.004014

D. Mejia, M. Bauerheim, P. Xavier, B. Ferret, L. Selle et al., Stabilization of a premixed laminar flame on a rotating cylinder, Proceedings of the Combustion Institute, vol.36, issue.1, pp.1447-1455, 2017.
DOI : 10.1016/j.proci.2016.06.138
URL : https://hal.archives-ouvertes.fr/hal-01502818

D. Mejia, M. Miguel-brebion, A. Ghani, T. Kaiser, F. Duchaine et al., Influence of flame-holder temperature on the acoustic flame transfer functions of a laminar flame, Combustion and Flame, vol.188, pp.5-12, 2018.
DOI : 10.1016/j.combustflame.2017.09.016
URL : https://hal.archives-ouvertes.fr/hal-01730352

D. Mejia, L. Selle, R. Bazile, and T. Poinsot, Wall-temperature effects on flame response to acoustic oscillations, Proceedings of the Combustion Institute, vol.35, issue.3, pp.3201-3208, 2015.
DOI : 10.1016/j.proci.2014.07.015
URL : https://hal.archives-ouvertes.fr/hal-01116177

R. Mercier, T. Guiberti, A. Chatelier, D. Durox, O. Giquel et al., Experimental and numerical investigation of the influence of thermal boundary conditions on premixed swirling flame stabilization, Combustion and Flame, vol.171, pp.42-58, 2016.
DOI : 10.1016/j.combustflame.2016.05.006
URL : https://hal.archives-ouvertes.fr/hal-01405801

M. Miguel-brebion, D. Mejia, P. Xavier, F. Duchaine, B. Bedat et al., Joint experimental and numerical study of the influence of flame holder temperature on the stabilization of a laminar methane flame on a cylinder, Combustion and Flame, vol.172, pp.153-161, 2016.
DOI : 10.1016/j.combustflame.2016.06.025
URL : https://hal.archives-ouvertes.fr/hal-01557859

N. Padture, M. Gell, and E. Jordan, Thermal Barrier Coatings for Gas-Turbine Engine Applications, Science, vol.296, issue.5566, pp.280-284, 2002.
DOI : 10.1126/science.1068609

T. Poinsot and D. Veynante, Theoretical and Numerical Combustion, 2011.
URL : https://hal.archives-ouvertes.fr/hal-00270731

P. Popp and M. Baum, Analysis of wall heat fluxes, reaction mechanisms, and unburnt hydrocarbons during the head-on quenching of a laminar methane flame, Combustion and Flame, vol.108, issue.3, pp.327-348, 1997.
DOI : 10.1016/S0010-2180(96)00144-7

L. Tay-wo-chong and W. Polifke, Large Eddy Simulation-Based Study of the Influence of Thermal Boundary Condition and Combustor Confinement on Premix Flame Transfer Functions, Journal of Engineering for Gas Turbines and Power, vol.49, issue.2, p.21502, 2013.
DOI : 10.1016/j.combustflame.2007.07.005

K. Tobin, S. Allison, M. Cates, G. Capps, D. Beashears et al., High-temperature phosphor thermometry of rotating turbine blades, AIAA Journal, vol.62, issue.8, pp.1485-1490, 1990.
DOI : 10.1364/AO.26.004014

A. Wulff and J. Hourmouziadis, Technology review of aeroengine pollutant emissions, Aerospace Science and Technology, vol.1, issue.8, pp.557-572, 1997.
DOI : 10.1016/S1270-9638(97)90004-3

P. Xavier, A. Ghani, M. Miguel-brebion, M. Bauerheim, L. Selle et al., Experimental and numerical investigation of flames stabilised behind rotating cylinders: interaction of flames with a moving wall, Journal of Fluid Mechanics, vol.24, pp.127-151, 2017.
DOI : 10.1017/S0022112090003342
URL : https://hal.archives-ouvertes.fr/hal-01502574