J. Acosta-esquijarosa, I. Rodríguez-donis, U. Jáuregui-haza, L. Nuevas-paz, and E. Pardillo-fontdevila, Recovery of acetonitrile from aqueous waste by a combined process: Solvent extraction and batch distillation, Separation and Purification Technology, vol.52, issue.1, pp.95-101, 2006.
DOI : 10.1016/j.seppur.2006.03.018

S. Arifin and I. L. Chien, Design and Control of an Isopropyl Alcohol Dehydration Process via Extractive Distillation Using Dimethyl Sulfoxide as an Entrainer, Industrial & Engineering Chemistry Research, vol.47, issue.3, pp.790-803, 2008.
DOI : 10.1021/ie070996n

C. Bravo-bravo, J. G. Segovia-hernández, C. Gutiérrez-antonio, A. L. Durán, A. Bonilla-petriciolet et al., Extractive Dividing Wall Column: Design and Optimization, Industrial & Engineering Chemistry Research, vol.49, issue.8, pp.3672-3688, 2010.
DOI : 10.1021/ie9006936

D. Figueiredo, M. F. Guedes, B. P. De-araújo, J. M. Vasconcelos, L. G. Brito et al., Optimal design of extractive distillation columns???A systematic procedure using a process simulator, Chemical Engineering Research and Design, vol.89, issue.3, pp.341-346, 2011.
DOI : 10.1016/j.cherd.2010.06.011

D. Figueiredo, M. F. Brito, K. D. Ramos, W. B. Vasconcelos, L. G. Brito et al., Effect of Solvent Content on the Separation and the Energy Consumption of Extractive Distillation Columns, Chemical Engineering Communications, vol.3, issue.50, pp.1191-1199, 2015.
DOI : 10.1016/S1359-4311(02)00006-6

D. Figueiredo, M. F. Brito, K. D. Ramos, W. B. Vasconcelos, L. G. Brito et al., Optimization of the Design and Operation of Extractive Distillation Processes, Separation Science and Technology, vol.47, issue.13, pp.2238-2247, 2015.
DOI : 10.1002/aic.10108

M. F. Doherty and J. P. Knapp, Distillation, azeotropic, and extractive. Kirk-Othmer Encycl, Chem. Technol, 1993.
DOI : 10.1002/0471238961.0409192004150805.a01

J. M. Douglas, Conceptual Design of Chemical Processes, 1988.

P. García-herreros, J. M. Gómez, I. D. Gil, and G. Rodriguez, Optimization of the Design and Operation of an Extractive Distillation System for the Production of Fuel Grade Ethanol Using Glycerol as Entrainer, Industrial & Engineering Chemistry Research, vol.50, issue.7, pp.3977-3985, 2011.
DOI : 10.1021/ie101845j

V. Gerbaud and I. Rodriguez-donis, Chapter 6 Extractive distillation, Distillation: Equipment and Processes, pp.201-246, 2014.

A. Gomez, L. Pibouleau, C. Azzaro-pantel, S. Domenech, C. Latge et al., Multiobjective genetic algorithm strategies for electricity production from generation IV nuclear technology, Energy Conversion and Management, vol.51, issue.4, pp.859-871, 2010.
DOI : 10.1016/j.enconman.2009.11.022

K. Huang, L. Shan, Q. Zhu, and J. Qian, Adding rectifying/stripping section type heat integration to a pressure-swing distillation (PSD) process, Applied Thermal Engineering, vol.28, issue.8-9, pp.923-932, 2008.
DOI : 10.1016/j.applthermaleng.2007.07.003

J. P. Knapp and M. F. Doherty, Minimum entrainer flows for extractive distillation: A bifurcation theoretic approach, AIChE Journal, vol.40, issue.2, pp.243-268, 1994.
DOI : 10.1002/aic.690400206

S. Kossack, K. Kraemer, R. Gani, and W. Marquardt, A systematic synthesis framework for extractive distillation processes, Chemical Engineering Research and Design, vol.86, issue.7, pp.781-792, 2008.
DOI : 10.1016/j.cherd.2008.01.008

J. Leboreiro and J. Acevedo, Processes synthesis and design of distillation sequences using modular simulators: a genetic algorithm framework, Computers & Chemical Engineering, vol.28, issue.8, pp.1223-1236, 2004.
DOI : 10.1016/j.compchemeng.2003.06.003

L. Li, L. Guo, Y. Tu, N. Yu, L. Sun et al., Comparison of different extractive distillation processes for 2-methoxyethanol/toluene separation: Design and control, Computers & Chemical Engineering, vol.99, pp.117-134, 2017.
DOI : 10.1016/j.compchemeng.2017.01.025

K. Liang, W. Li, H. Luo, M. Xia, and C. Xu, Energy-Efficient Extractive Distillation Process by Combining Preconcentration Column and Entrainer Recovery Column, Industrial & Engineering Chemistry Research, vol.53, issue.17, pp.7121-7131, 2014.
DOI : 10.1021/ie5002372

W. L. Luyben, Pressure-Swing Distillation for Minimum- and Maximum-Boiling Homogeneous Azeotropes, Industrial & Engineering Chemistry Research, vol.51, issue.33, pp.10881-10886, 2012.
DOI : 10.1021/ie3002414

W. L. Luyben and I. L. Chien, Design and Control of Distillation Systems for Separating Azeotropes, 2011.
DOI : 10.1002/9780470575802

W. L. Luyben, Distillation column pressure selection, Separation and Purification Technology, vol.168, pp.62-67, 2016.
DOI : 10.1016/j.seppur.2016.05.015

T. Mahdi, A. Ahmad, M. M. Nasef, and A. Ripin, State-of-the-Art Technologies for Separation of Azeotropic Mixtures, Separation & Purification Reviews, vol.1, issue.4, pp.308-330, 2015.
DOI : 10.1080/01496390903014474

P. S. Ortiz and S. Oliveira, Exergy analysis of pretreatment processes of bioethanol production based on sugarcane bagasse, Energy, vol.76, pp.130-138, 2014.
DOI : 10.1016/j.energy.2014.04.090

F. Petlyuk, R. Danilov, and J. Burger, A novel method for the search and identification of feasible splits of extractive distillations in ternary mixtures, Chemical Engineering Research and Design, vol.99, pp.132-148, 2015.
DOI : 10.1016/j.cherd.2015.02.013

G. P. Rangaiah, Multi-Objective Optimization: Techniques and Applications in Chemical Engineering, 2009.
DOI : 10.1142/10240

G. P. Rangaiah and A. Bonilla-petriciolet, Multi-Objective Optimization in Chemical Engineering: Developments and Applications, 2013.
DOI : 10.1002/9781118341704

G. P. Rangaiah, S. Sharma, and B. K. Sreepathi, Multi-objective optimization for the design and operation of energy efficient chemical processes and power generation, Current Opinion in Chemical Engineering, vol.10, pp.49-62, 2015.
DOI : 10.1016/j.coche.2015.08.006

J. U. Repke, F. Forner, and A. Klein, Separation of Homogeneous Azeotropic Mixtures by Pressure Swing Distillation - Analysis of the Operation Performance, Chemical Engineering & Technology, vol.24, issue.10, pp.1151-1157, 2005.
DOI : 10.1002/ceat.200500232

I. Rodriguez-donis, V. Gerbaud, and X. Joulia, Thermodynamic Insights on the Feasibility of Homogeneous Batch Extractive Distillation, 1. Azeotropic Mixtures with a Heavy Entrainer, Industrial & Engineering Chemistry Research, vol.48, issue.7, pp.3544-3559, 2009.
DOI : 10.1021/ie801060n
URL : https://hal.archives-ouvertes.fr/hal-00464445

I. Rodriguez-donis, V. Gerbaud, and X. Joulia, Thermodynamic Insights on the Feasibility of Homogeneous Batch Extractive Distillation. 3. Azeotropic Mixtures with Light Entrainer., Industrial & Engineering Chemistry Research, vol.51, issue.12, pp.4643-4660, 2011.
DOI : 10.1021/ie201942b
URL : https://hal.archives-ouvertes.fr/hal-00464445

X. You, I. Rodriguez-donis, and V. Gerbaud, Improved Design and Efficiency of the Extractive Distillation Process for Acetone???Methanol with Water, Industrial & Engineering Chemistry Research, vol.54, issue.1, pp.491-501, 2015.
DOI : 10.1021/ie503973a
URL : https://hal.archives-ouvertes.fr/hal-01338755

X. You, I. Rodriguez-donis, and V. Gerbaud, Investigation of Separation Efficiency Indicator for the Optimization of the Acetone???Methanol Extractive Distillation with Water, Industrial & Engineering Chemistry Research, vol.54, issue.43, pp.10863-10875, 2015.
DOI : 10.1021/acs.iecr.5b02015

X. You, I. Rodriguez-donis, and V. Gerbaud, Reducing process cost and CO2 emissions for extractive distillation by double-effect heat integration and mechanical heat pump, Applied Energy, vol.166, pp.128-140, 2016.
DOI : 10.1016/j.apenergy.2016.01.028
URL : https://hal.archives-ouvertes.fr/hal-01339941

X. You, I. Rodriguez-donis, and V. Gerbaud, Low pressure design for reducing energy cost of extractive distillation for separating diisopropyl ether and isopropyl alcohol, Chemical Engineering Research and Design, vol.109, pp.540-552, 2016.
DOI : 10.1016/j.cherd.2016.01.026
URL : https://hal.archives-ouvertes.fr/hal-01340000

Z. Zhu, L. Wang, Y. Ma, W. Wang, and Y. Wang, Separating an azeotropic mixture of toluene and ethanol via heat integration pressure swing distillation, Computers & Chemical Engineering, vol.76, pp.137-149, 2015.
DOI : 10.1016/j.compchemeng.2015.02.016