M. H. Prior, H. Prem, and M. J. Rhodes, Size reduction, Principles of Powder Technology, pp.227-298, 1990.

M. Mebtoul, J. F. Large, and P. Guigon, High velocity impact of particles on a target. An experimental study, International Journal of Mineral Processing, pp.77-91, 1996.

. Militzer, Solid particle velocity measurement, Fluidization VII, Engineering Foundation, pp.763-768, 1992.

J. Dodds, C. Frances, P. Guigon, and A. Thomas, Investigations into very fine grinding, Kona-Powder and Particle, vol.13, pp.113-124, 1995.

J. A. Laitone, Aerodynamic effects in the erosion process, Wear, vol.56, pp.239-246, 1979.

W. , A statistical theory of the strength of materials, Ingeniörs Vetenskaps Akademien Handligar, Generalstabens Litografiska Anstalts Förlag, 1939.

A. A. Griffith, The phenomena of rupture and flow in solids, Philosophical Transactions of the Royal Society of London, Series A, vol.221, pp.163-198, 1921.

P. H. Shipway and I. M. Hutchings, Attrition of brittle spheres by fracture under compression and impact loading, Powder Technology, vol.76, pp.23-30, 1993.

H. J. Herrmann and S. Roux, Statistical Models for the Fracture of Disordered Media, pp.444-88, 1990.

L. G. Austin, Approximate calculation of specific fracture energies for grinding, Powder Technology, vol.53, pp.145-150, 1987.

Y. Kanda, Y. Abe, M. Yamaguchi, and C. Endo, A fundamental study of dry and wet grinding from the viewpoint of breaking strength, Powder Technology, vol.56, pp.57-62, 1988.

S. P. Timoshenko and J. N. Goodier, Theory of elasticity, Engineering Societies Monographs, 1970.

S. Okuda and W. Choi, Grinding characteristics of target type fluid energy mill, Journal of Chemical Engineering of Japan, vol.13, issue.13, pp.219-225, 1980.

. Goodfellow-catalogue and S. Goodfellow, , 1997.

A. U. Neil and J. Bridgwater, Attrition of particulate solids under shear, Powder Technology, vol.80, pp.207-219, 1994.

S. Okuda and W. Choi, Fracture characteristics of single particle of polymeric materials under impact loading, Journal of Chemical Engineering of Japan, vol.12, issue.5, pp.383-388, 1979.

J. T. Hagan, Impossibility of fragmenting small particles: brittleductile transition, Journal of Materials Science Letters, vol.16, pp.2909-2911, 1981.

K. Kendall, The impossibility of comminuting small particles by compression, Nature, vol.272, pp.710-711, 1978.

M. Ghadiri and D. G. Papadopoulos, Impact attrition of particulate solids, 1993.

J. T. Hagan, Micromechanics of crack nucleation during indentations, Journal of Materials Science, vol.14, pp.2975-2980, 1979.

M. Ghadiri and D. G. Papadopoulos, Attrition of particulate solids, IFPRI annual meeting report, 1995.

G. Jimbo, Q. Q. Zhao, T. Yokoyama, and Y. Taniyama, The grinding limit and the negative grinding phenomenon, Proceedings of Second World Congress Particle Technology, pp.123-128, 1990.

R. Hogg and H. Cho, A review of breakage behavior in fine grinding by stirred-media milling, Kona, vol.18, pp.9-19, 2000.

J. A. Cleaver, M. Ghadiri, and N. Rolfe, Impact attrition of sodium carbonate monohydrate crystals, Powder Technology, vol.76, pp.15-22, 1993.

K. Leschonski and U. Menzel, Experimental investigations on single plate fluid energy milling, Proceedings of First World Conference on Particle Technology, vol.2, pp.297-323, 1988.

P. M. Vervoorn and L. G. Austin, The analysis of repeated breakage events as an equivalent rate process, Powder Technology, vol.63, pp.141-147, 1990.

L. G. Austin, P. M. Trubelja, and B. Scarlett, A study of the fracture of pellets fired against a target, Particle & Particle Systems Characterization, vol.10, pp.347-352, 1993.