A. Michau, F. Maury, F. Schuster, R. Boichot, and M. Pons, Evidence for a Cr metastable phase as a tracer in DLI-MOCVD chromium hard coatings usable in high temperature environment, Applied Surface Science, vol.422, issue.2, pp.198-206, 2011.
DOI : 10.1016/j.apsusc.2017.05.253
URL : https://hal.archives-ouvertes.fr/hal-01677231

T. Yu, Z. X. Shen, J. He, W. X. Sun, S. H. Tang et al., Phase control of chromium oxide in selective microregions by laser annealing, Journal of Applied Physics, vol.32, issue.7, pp.93-3951, 2003.
DOI : 10.1016/S0254-0584(02)00059-7

H. C. Barshilia, N. Selvakumar, K. S. Rajam, and A. Biswas, Structure and optical properties of pulsed sputter deposited CrxOy???Cr???Cr2O3 solar selective coatings, Journal of Applied Physics, vol.31, issue.2, p.23507, 2008.
DOI : 10.1016/0165-1633(89)90011-7

A. C. Ferrari and J. Robertson, Raman spectroscopy of amorphous, nanostructured, diamond-like carbon, and nanodiamond, Philosophical Transactions of the Royal Society A: Mathematical, Physical and Engineering Sciences, vol.362, issue.1824, pp.2477-2512, 2004.
DOI : 10.1098/rsta.2004.1452

P. K. Chu and L. Li, Characterization of amorphous and nanocrystalline carbon films, Materials Chemistry and Physics, vol.96, issue.2-3, pp.253-277, 2006.
DOI : 10.1016/j.matchemphys.2005.07.048

L. G. Cançado, A. Jorio, E. H. Ferreira, F. Stavale, C. A. Achete et al., Quantifying Defects in Graphene via Raman Spectroscopy at Different Excitation Energies, Nano Letters, vol.11, issue.8, pp.3190-3196, 2011.
DOI : 10.1021/nl201432g

V. D. Aleksandrov, Vapor-phase deposition of coatings from bis-arene chromium compounds on aluminum alloys, Metal Science and Heat Treatment, vol.44, issue.3/4, pp.160-162, 2002.
DOI : 10.1023/A:1019638724753

V. I. Yurshev, R. I. Mukatdarov, and I. V. Yurshev, Surface Hardening of Tools by Depositing a Pyrolytic Chromium Carbide Coating, Metal Science and Heat Treatment, vol.18, issue.2, pp.107-111, 2015.
DOI : 10.1007/s11041-015-9845-y

Z. Zeng, L. Wang, A. Liang, and J. Zhang, Tribological and electrochemical behavior of thick Cr???C alloy coatings electrodeposited in trivalent chromium bath as an alternative to conventional Cr coatings, Electrochimica Acta, vol.52, issue.3, pp.1366-1373, 2006.
DOI : 10.1016/j.electacta.2006.07.038

V. S. Protsenko, F. I. Danilov, V. O. Gordiienko, A. S. Baskevich, and V. V. Artemchuk, Improving hardness and tribological characteristics of nanocrystalline Cr???C films obtained from Cr(III) plating bath using pulsed electrodeposition, International Journal of Refractory Metals and Hard Materials, vol.31, pp.31-281, 2012.
DOI : 10.1016/j.ijrmhm.2011.10.006

G. A. Lausmann, Electrolytically deposited hardchrome, Surface and Coatings Technology, vol.86, issue.87, pp.86-87, 1996.
DOI : 10.1016/S0257-8972(96)02973-8

A. Liang, L. Ni, Q. Liu, and J. Zhang, Structure characterization and tribological properties of thick chromium coating electrodeposited from a Cr(III) electrolyte, Surface and Coatings Technology, vol.218, pp.218-241, 2013.
DOI : 10.1016/j.surfcoat.2012.12.021

A. Aubert, J. Danroc, A. Gaucher, and J. P. Terrat, Hard chrome and molybdenum coatings produced by physical vapour deposition, Thin Solid Films, vol.126, issue.1-2, pp.61-67, 1985.
DOI : 10.1016/0040-6090(85)90175-0

G. Cholvy, J. L. Derep, and M. Gantois, Characterization and wear resistance of coatings in the Cr-C-N ternary system deposited by physical vapour deposition, Thin Solid Films, vol.126, issue.1-2, pp.51-60, 1985.
DOI : 10.1016/0040-6090(85)90174-9

D. Y. Wang, K. W. Weng, C. L. Chang, and W. Y. Ho, Synthesis of Cr 3 C 2 coatings for tribological applications, Surf. Coat. Technol, pp.120-121, 1999.

Y. L. Su, T. H. Liu, C. T. Su, and T. P. Cho, Effect of chromium content on the dry machining performance of magnetron sputtered CrxC coatings, Materials Science and Engineering: A, vol.364, issue.1-2, pp.188-197, 2004.
DOI : 10.1016/j.msea.2003.08.010

J. Esteve, J. Romero, M. Gómez, and A. Lousa, Cathodic chromium carbide coatings for molding die applications, Surface and Coatings Technology, vol.188, issue.189, pp.188-189, 2004.
DOI : 10.1016/j.surfcoat.2004.08.064

J. Romero, E. Martinez, J. Esteve, and A. Lousa, Nanometric chromium nitride/chromium carbide multilayers by r.f. magnetron sputtering, Surface and Coatings Technology, vol.180, issue.181, pp.180-181, 2004.
DOI : 10.1016/j.surfcoat.2003.10.082

B. Bryskin, A. Kostylev, Y. Pokrovskiy, and A. Lumpov, CVD Technology for Preparing Wear-Resistive Chromium Carbide Coatings of Engine Components, SAE International Journal of Materials and Manufacturing, vol.7, issue.3, pp.630-632, 2014.
DOI : 10.4271/2014-01-1020

T. Y. Tsui, G. M. Pharr, W. C. Oliver, C. S. Bhatia, R. L. White et al., Nanoindentation and Nanoscratching of Hard Carbon Coatings for Magnetic Disks, MRS Online Proceedings Library Archive, pp.447-452, 1995.
DOI : 10.1007/BF02652912

J. Musil, P. Karvánková, and J. , Hard and superhard Zr???Ni???N nanocomposite films, Surface and Coatings Technology, vol.139, issue.1, pp.101-109, 2001.
DOI : 10.1016/S0257-8972(01)00989-6

M. Nowak, F. Lofaj, and P. Hviscova, The effect of residual stresses on nanoindentation behavior of thin W-C based coatings, Powder Metall. Prog, vol.13, pp.132-138, 2013.

B. Xiao, J. Feng, C. T. Zhou, Y. H. Jiang, and R. Zhou, Mechanical properties and chemical bonding characteristics of Cr7C3 type multicomponent carbides, Journal of Applied Physics, vol.109, issue.2, p.23507, 2011.
DOI : 10.1103/PhysRevB.73.174112

C. A. Klein, How accurate are Stoney???s equation and recent modifications, Journal of Applied Physics, vol.54, issue.9, pp.5487-5489, 2000.
DOI : 10.6028/jres.042.009

S. Wu, Q. Guo, S. Wu, and C. Zhao, Modified curvature method for residual thermal stress estimation in coatings, Surface Engineering, vol.17, issue.11, pp.866-870, 2014.
DOI : 10.1016/j.vacuum.2008.04.068

E. Bauer-grosse, Thermal stability and crystallization studies of amorphous TM-C films, Thin Solid Films, pp.447-448, 2004.

M. Magnuson, M. Andersson, J. Lu, L. Hultman, and U. Jansson, Electronic structure and chemical bonding of amorphous chromium carbide thin films, Journal of Physics: Condensed Matter, vol.24, issue.22, pp.225004-225010, 2012.
DOI : 10.1088/0953-8984/24/22/225004

N. N. Travkin, B. G. Gribov, and V. P. Rumyants, Thermal decomposition of bisarene compounds of chromium, Zh. Obshch. Khim, p.40, 1970.

G. G. Devyatykh, V. A. Umilin, Y. V. Zverev, and I. A. Frolov, Composition of impurities in bis-ethylbenzene chromium produced according to the Friedel-Crafts method, Bulletin of the Academy of Sciences of the USSR Division of Chemical Science, vol.35, issue.2
DOI : 10.1007/BF00905519

B. G. Gribov, Super-pure Materials from Metal-organic Compounds, Russian Chemical Reviews, vol.42, issue.11, pp.42-893, 1973.
DOI : 10.1070/RC1973v042n11ABEH002773

A. Douard, Dépôt de carbures, nitrures et multicouches nanostructurées à base de chrome sous pression atmosphérique par DLI-MOCVD: nouveaux procédés et potentialités de ces revêtements métallurgiques (PhD dissertation), INP Toulouse, 2006.

H. Liu, H. Hanyu, Y. Murakami, S. Kamiya, and M. Saka, Recycling technique for CVD diamond coated cutting tools, Surface and Coatings Technology, vol.137, issue.2-3, pp.246-248, 2001.
DOI : 10.1016/S0257-8972(00)01081-1

Y. Wang, Y. Zheng, X. Xu, E. Dubuisson, Q. Bao et al., Electrochemical Delamination of CVD-Grown Graphene Film: Toward the Recyclable Use of Copper Catalyst, ACS Nano, vol.5, issue.12, pp.9927-9933, 2011.
DOI : 10.1021/nn203700w

R. International, Japanese recycling process for ruthenium precursors, http://www.recyclinginternational.com/recycling-news/3464/research-and- legislation/japan/japanese-recycling-process-ruthenium-precursors, Accessed date, p.17, 2010.

V. Revankar and S. Lahoti, CVD-Siemens reactor process hydrogen recycle system, 2015.

F. X. Lu, W. Z. Tang, G. F. Zhong, T. B. Huang, J. M. Liu et al., Economical deposition of a large area of high quality diamond film by a high power DC arc plasma jet operating in a gas recycling mode, Diamond and Related Materials, vol.9, issue.9-10, pp.1655-1659, 2000.
DOI : 10.1016/S0925-9635(00)00305-8

S. Noda, K. Hagiwara, O. Ichikawa, K. Tanabe, T. Yahiro et al., Closed recycle CVD process for mass production of SOG-Si from MG- Si, Photovoltaic Specialists Conference, Conference Record of the 19th IEEE, pp.308-311, 2002.

M. E. Collingham and R. L. Zollars, Effect of Recycling on the Axial Distribution of Coating Thickness in a Low Pressure CVD Reactor, Journal of The Electrochemical Society, vol.136, issue.3, pp.787-794, 1989.
DOI : 10.1149/1.2096745

K. F. Jensen and D. B. Graves, Modeling and Analysis of Low Pressure CVD Reactors, Journal of The Electrochemical Society, vol.130, issue.9, pp.1950-1957, 1983.
DOI : 10.1149/1.2120129

F. Maury, L. Gueroudji, and C. Vahlas, Selection of metalorganic precursors for MOCVD of metallurgical coatings: application to Cr-based coatings, Surface and Coatings Technology, vol.86, issue.87, pp.86-87, 1996.
DOI : 10.1016/S0257-8972(96)03045-9

T. T. Kodas and M. J. Hampden-smith, The Chemistry of Metal CVD, 1994.
DOI : 10.1002/9783527615858

F. Maury and F. Ossola, Evaluation of tetra-alkylchromium precursors for organometallic chemical vapour deposition I. films grown using Cr[CH2C(CH3)3]4, Thin Solid Films, vol.207, issue.1-2, pp.82-89, 1992.
DOI : 10.1016/0040-6090(92)90106-L

S. Abisset and F. Maury, Low-temperature MOCVD of V???C???N coatings using bis(arene)vanadium as precursors, Surface and Coatings Technology, vol.108, issue.109, pp.108-109, 1998.
DOI : 10.1016/S0257-8972(98)00619-7

N. G. Anantha, V. Y. Doo, and D. K. Seto, Chromium Deposition from Dicumene-Chromium to Form Metal-Semiconductor Devices, Journal of The Electrochemical Society, vol.118, issue.1, pp.163-165, 1971.
DOI : 10.1149/1.2407936

F. Maury, D. Oquab, J. C. Manse, R. Morancho, J. F. Nowak et al., Structural characterization of chromium carbide coatings deposited at low temperature by LPCVD process using dicumene chromium, Surf. Coat. Technol, pp.41-51, 1990.

F. Schuster, F. Maury, and J. F. Nowak, Influence of organochromium precursor chemistry on the microstructure of MOCVD chromium carbide coatings, Surf. Coat. Technol, pp.43-44, 1990.

V. B. Polikarpov, A. S. Luzin, V. A. Dodonov, and E. K. Klement, Chromium films obtained by pyrolysis of chromium bisarene complexes in the presence of chlorinated hydrocarbons, Izv. Akad. Nauk SSSR, vol.20, pp.1839-1842, 1983.

T. P. Whaley and V. Norman, Carbonaceous solid bodies and processes for their manufacture, 1966.

F. Schuster, F. Maury, J. F. Nowak, and C. Bernard, Characterization of chromium nitride and carbonitride coatings deposited at low temperature by OMCVD, Surf. Coat. Technol, pp.46-275, 1991.

F. Maury, C. Vahlas, S. Abisset, and L. Gueroudji, Low temperature MOCVD routes to chromium metal thin films using bis(benzene)chromium, J. Electrochem. Soc, pp.146-3716, 1999.
DOI : 10.1149/1.1392539

A. S. Luzin, V. B. Polikarpov, V. A. Dodonov, and E. K. Klement, Chromium films produced by pyrolysis of its bis-arene complexes in the presence of sulfur-containing additives, Zh. Prikl. Khim, pp.61-1235, 1988.

F. Maury, A. Douard, S. Delclos, D. Samelor, and C. Tendero, Multilayer chromium based coatings grown by atmospheric pressure direct liquid injection CVD, Surface and Coatings Technology, vol.204, issue.6-7, pp.983-987, 2009.
DOI : 10.1016/j.surfcoat.2009.04.020

T. Drozda, C. Wick, J. T. Benedict, R. F. Veilleux, and R. Bakerjian, Tool and manufacturing engineers handbook, Plastic part manufacturing, 1996.

B. Bryskin, A. Kostylev, Y. Pokrovskiy, and A. Lumpov, Innovative Processing Technology of Chromium Carbide Coating to Apprise Performance of Piston Rings, SAE International Journal of Materials and Manufacturing, vol.6, issue.2
DOI : 10.4271/2012-01-2327

C. Vahlas, F. Maury, and L. Gueroudji, A Thermodynamic Approach to the CVD of Chromium and of Chromium Carbides Starting from Cr(C6H6)2, Chemical Vapor Deposition, vol.04, issue.02, pp.69-76, 1998.
DOI : 10.1002/(SICI)1521-3862(199803)04:02<69::AID-CVDE69>3.3.CO;2-7

A. Douard, C. Bernard, and F. Maury, Thermodynamic simulation of atmospheric DLI-CVD processes for the growth of chromium-based hard coatings using bis(benzene)chromium as molecular source, Surface and Coatings Technology, vol.203, issue.5-7, pp.203-516, 2008.
DOI : 10.1016/j.surfcoat.2008.07.013

A. Michau, F. Maury, F. Schuster, R. Boichot, and M. Pons, Chromium Carbide Growth by Direct Liquid Injection Chemical Vapor Deposition in Long and Narrow Tubes, Experiments, Modeling and Simulation, 2017.

T. N. Blanton and D. Majumdar, Characterization of X-ray irradiated graphene oxide coatings using X-ray diffraction, X-ray photoelectron spectroscopy, and atomic force microscopy, Powder Diffraction, vol.28, issue.02, pp.28-68, 2013.
DOI : 10.1017/S0885715612000292

V. Q. Bui, H. M. Le, Y. Kawazoe, and D. Nguyen-manh, Graphene-Cr-Graphene Intercalation Nanostructures: Stability and Magnetic Properties from Density Functional Theory Investigations, The Journal of Physical Chemistry C, vol.117, issue.7, pp.3605-3614, 2013.
DOI : 10.1021/jp310806a