G. Lundberg and A. Palmgren, Dynamic capacity of rolling bearings, Trans Roy Swed Inst Tech, p.196, 1947.

F. Bastenaire, Étude statistique et physique de la dispersion des résistances et des endurances à la fatigue, thèse d'état, 1960.

F. Hild and S. Roux, Fatigue initiation in heterogeneous brittle materials, Mechanics Research Communications, vol.18, issue.6, pp.409-414, 1991.
DOI : 10.1016/0093-6413(91)90054-Z

A. De-bussac and J. C. Lautridou, A PROBABILISTIC MODEL FOR PREDICTION OF LCF SURFACE CRACK INITIATION IN PM ALLOYS, Fatigue & Fracture of Engineering Materials and Structures, vol.2, issue.8, pp.861-874, 1993.
DOI : 10.1111/j.1460-2695.1979.tb01096.x

A. De-bussac, PREDICTION OF THE COMPETITION BETWEEN SURFACE AND INTERNAL FATIGUE CRACK INITIATION IN PM ALLOYS, Fatigue & Fracture of Engineering Materials & Structures, vol.9, issue.8, pp.1319-1325, 1994.
DOI : 10.1179/mst.1993.9.6.453

H. , Y. Agha, A. Béranger, R. Billardon, and F. Hild, High Cycle Fatigue Behaviour of Spheroidal Graphite Cast Iron, pp.287-296, 1998.

I. Chantier, V. Bobet, R. Billardon, and F. Hild, A probabilistic approach to predict the very high-cycle fatigue behaviour of spheroidal graphite cast iron structures, Fatigue <html_ent glyph="@amp;" ascii="&"/> Fracture of Engineering Materials and Structures, vol.65, issue.2, pp.23-173, 2000.
DOI : 10.1111/j.1151-2916.1982.tb10351.x

L. Flacelière, F. Morel, and Y. Nadot, Approche probabiliste en fatigue multiaxiale polycyclique : application aux défauts de fonderie, 22e Journées de Printemps : Fatigue et procédés de fabrication, p.2, 2003.

E. Thieulot-laure, S. Pommier, and S. Fréchinet, A multiaxial fatigue failure criterion considering the effects of the defects, Int J Fat, p.29, 1996.

D. G. Davies, The Statistical Approach to Engineering Design in Ceramics, Proc Brit Ceram Soc, pp.22-429, 1973.

F. Hild, A. Béranger, and R. Billardon, Fatigue failure maps of heterogeneous materials, Mechanics of Materials, vol.22, issue.1, pp.11-21, 1996.
DOI : 10.1016/0167-6636(95)00022-4

I. Chantier, V. Denier-bobet, and F. Hild, A Lifing Procedure for Shot-Peened Cast Components Subjected to High Cycle Fatigue, pp.3-127, 2000.

F. Morel and L. Flacelière, Data scatter in multiaxial fatigue: from the infinite to the finite fatigue life regime, International Journal of Fatigue, vol.27, issue.9, pp.1089-1101, 2005.
DOI : 10.1016/j.ijfatigue.2005.01.009

M. P. Luong, Infrared thermography of fatigue in metals, SPIE, pp.1682-222, 1992.

M. P. Luong, Fatigue limit evaluation of metals using an infrared thermographic technique, Mechanics of Materials, vol.28, issue.1-4, pp.155-163, 1998.
DOI : 10.1016/S0167-6636(97)00047-1
URL : https://hal.archives-ouvertes.fr/hal-00111598

J. Krapez, D. Pacou, and C. Bertin, Application of lock-in thermography to a rapid evaluation of the fatigue limit in metals, 5th AITA, Int Workshop on Advanced Infrared Techn and Appl, pp.379-385, 1999.

G. , L. Rosa, and A. Risitano, Thermographic methodology for rapid determination of the fatigue limit of materials and mechanical components, Int J Fat, vol.22, pp.65-73, 2000.

C. Mabru and A. Chrysochoos, Dissipation et couplages accompagnant la fatigue de matériaux métalliques, pp.375-382, 2001.

J. Krapez and D. Pacou, Thermography detection of early thermal effects during fatigue tests of steel and aluminum samples, AIP Conference Proceedings, pp.615-1545, 2002.
DOI : 10.1063/1.1472977

A. Galtier, O. Bouaziz, and A. Lambert, Influence de la microstructure des aciers sur leurs propriétés mécaniques, pp.457-462, 2002.

T. Boulanger, A. Chrysochoos, C. Mabru, and A. Galtier, Calorimetric analysis of dissipative and thermoelastic effects associated with the fatigue behavior of steels, International Journal of Fatigue, vol.26, issue.3, pp.26-221, 2004.
DOI : 10.1016/S0142-1123(03)00171-3

C. Doudard, S. Calloch, P. Cugy, A. Galtier, and F. Hild, A probabilistic two-scale model for high-cycle fatigue life predictions, Fatigue <html_ent glyph="@amp;" ascii="&"/> Fracture of Engineering Materials and Structures, vol.5, issue.3, pp.28-279, 2005.
DOI : 10.1007/BF00553691
URL : https://hal.archives-ouvertes.fr/hal-00322496

F. T. Pierce, Tensile Tests for Cotton Yarns, V. The 'Weakest Link' Theorems on the Strength of Long and of Composite Specimens, J Text Inst, pp.17-355, 1926.

Y. Nadot, N. Ranganathan, J. Mendez, and A. Béranger, A study of natural cracks initiated on casting defects by crack front marking, Scripta Materialia, vol.37, issue.5, pp.37-549, 1997.
DOI : 10.1016/S1359-6462(97)00158-9

Y. Murakami and T. Endo, Effects of small defects on fatigue strength of metals, International Journal of Fatigue, vol.2, issue.1, pp.23-30, 1980.
DOI : 10.1016/0142-1123(80)90024-9

Y. Murakami and S. Beretta, Small Defects and Inhomogeneities in Fatigue Strength: Experiments, Models and Statistical Implications, pp.123-147, 1999.

A. Nasr, Y. Nadot, C. Bouraoui, and R. Fathallah, Effect of Artificial Defect and Mean Shear Stress on Torsional Fatigue Behaviour, Applied Mechanics and Materials, vol.146, pp.74-82, 2012.
DOI : 10.4028/www.scientific.net/AMM.146.74

P. Clément, J. Angeli, and A. Pineau, SHORT CRACK BEHAVIOUR IN NODULAR CAST IRON, Fatigue & Fracture of Engineering Materials and Structures, vol.4, issue.4, pp.251-265, 1984.
DOI : 10.1016/0013-7944(79)90081-X

A. Wöhler, Über die Festigkeitsversuche mit Eisen und Stahl, pp.73-106, 1870.

K. D. Van, A. Le-douaron, and H. P. Lieurade, MULTIAXIAL FATIGUE LIMIT: A NEW APPROACH, pp.1879-1885, 1984.
DOI : 10.1016/B978-1-4832-8440-8.50185-X

I. V. Papadopoulos, P. Davoli, C. Gorla, M. Filippini, and A. Bernasconi, A comparative study of multiaxial high-cycle fatigue criteria for metals, International Journal of Fatigue, vol.19, issue.3, pp.219-235, 1997.
DOI : 10.1016/S0142-1123(96)00064-3

J. Lemaitre, J. Sermage, and R. Desmorat, A two scale damage concept applied to fatigue, Int J Fract, pp.97-67, 1999.

A. Bainvillet, T. Palin-luc, and S. Lasserre, A volumetric energy based high cycle multiaxial fatigue criterion, Int J Fat, pp.25-755, 2003.

M. Poncelet, C. Doudard, S. Calloch, B. Weber, and F. Hild, Probabilistic multiscale models and measurements of self-heating under multiaxial high cycle fatigue, Journal of the Mechanics and Physics of Solids, vol.58, issue.4, pp.58-578, 2010.
DOI : 10.1016/j.jmps.2010.01.003
URL : https://hal.archives-ouvertes.fr/hal-00453966

C. Mareau, Modélisation micromécanique de l'échauffement et de la microplasticité des aciers sous sollicitations cycliques, 2007.

A. Ezanno, C. Doudard, S. Calloch, and J. Heuzé, A new approach to characterizing and modeling the high cycle fatigue properties of cast materials based on self-heating measurements under cyclic loadings, International Journal of Fatigue, vol.47, pp.47-232, 2013.
DOI : 10.1016/j.ijfatigue.2012.09.005
URL : https://hal.archives-ouvertes.fr/hal-00785005

C. Peyrac, T. Jollivet, N. Leray, F. Lefebvre, O. Westphal et al., Self-heating Method for Fatigue Limit Determination on Thermoplastic Composites, Procedia Engineering, vol.133, pp.133-129, 2015.
DOI : 10.1016/j.proeng.2015.12.639
URL : https://doi.org/10.1016/j.proeng.2015.12.639

C. Doudard, M. Poncelet, S. Calloch, C. Boué, F. Hild et al., Determination of an HCF criterion by thermal measurements under biaxial cyclic loading, International Journal of Fatigue, vol.29, issue.4, pp.29-748, 2007.
DOI : 10.1016/j.ijfatigue.2006.06.009
URL : https://hal.archives-ouvertes.fr/hal-00322198

C. Atwood, V. Shah, and W. Galyen, Analysis of pressurized water reactor primary coolant leak events caused by thermal fatigue, European Safety and Reliability Conference, 1999.

M. Cipière and O. Goltrant, Circuit RRA N4 -incident de Civaux endommagement par fatigue thermique des tuyauteries situées dans des zones de mélange, International Symposium on Contribution of Materials Investigations to the Resolution of Problems Encountered in Pressurized Water Reactors, 2002.

V. Maillot, Initiation and growth of thermal fatigue crack networks in an AISI 304 L type austenitic stainless steel (X2 CrNi18-09), thèse de doctorat, 2003.

C. Déprés, Modélisation physique des stades précurseurs de l'endommagement en fatigue dans l'acier inoxydable austénitique 316L, 2004.

S. Osterstock, Vers la prédiction de l'apparition de réseaux de fissures : influence des paramètres microstructuraux sur la dispersion à l'amorçage, thèse de doctorat, 2008.

M. Seyedi, S. Taheri, and F. Hild, Numerical modeling of crack propagation and shielding effects in a striping network, Nuclear Engineering and Design, vol.236, issue.9, pp.954-964, 2006.
DOI : 10.1016/j.nucengdes.2005.10.002
URL : https://hal.archives-ouvertes.fr/hal-00086961

N. Malésys, L. Vincent, and F. Hild, A probabilistic model to predict the formation and propagation of crack networks in thermal fatigue, International Journal of Fatigue, vol.31, issue.3, pp.31-565, 2009.
DOI : 10.1016/j.ijfatigue.2008.03.026

N. Malésys, M. Seyedi, L. Vincent, and F. Hild, On the formation of crack networks in high cycle fatigue, Comptes Rendus M??canique, vol.334, issue.7, pp.419-424, 2006.
DOI : 10.1016/j.crme.2006.05.005

J. Rupil, L. Vincent, F. Hild, and S. Roux, IDENTIFICATION AND PROBABILISTIC MODELING OF MESOCRACK INITIATIONS IN 304L STAINLESS STEEL, International Journal for Multiscale Computational Engineering, vol.9, issue.4, pp.445-458, 2011.
DOI : 10.1615/IntJMultCompEng.v9.i4.70
URL : https://hal.archives-ouvertes.fr/hal-00614889

C. Denoual, G. Barbier, and F. Hild, A Probabilistic Approach for Fragmentation of Ceramics under Impact Loading, pp.325-685, 1997.

C. Denoual and F. Hild, Dynamic fragmentation of brittle solids: a multi-scale model, European Journal of Mechanics - A/Solids, vol.21, issue.1, pp.105-120, 2002.
DOI : 10.1016/S0997-7538(01)01187-1
URL : https://hal.archives-ouvertes.fr/hal-00013965

P. Boutet, F. Hild, and F. Lefebvre, Probabilistic Prediction of Fatigue Life of Cracked Parts: Linear Elastic Fracture Mechanics based Approach, Procedia Engineering, vol.66, pp.66-343, 2013.
DOI : 10.1016/j.proeng.2013.12.089

P. Boutet, Prise en compte des méconnaissances dans la quantification de la nocivité des fissures en fatigue, 2015.