M. Sutton, N. Li, D. Garcia, N. Cornille, J. Orteu et al., Scanning Electron Microscopy for Quantitative Small and Large Deformation Measurements Part II: Experimental Validation for Magnifications from 200 to 10,000, Experimental Mechanics, vol.15, issue.4, pp.789-804, 2007.
DOI : 10.1007/s11340-007-9041-0
URL : https://hal.archives-ouvertes.fr/hal-01644895

M. Sutton, N. Li, D. Joy, A. Reynolds, and X. Li, Scanning Electron Microscopy for Quantitative Small and Large Deformation Measurements Part I: SEM Imaging at Magnifications from 200 to 10,000, Experimental Mechanics, vol.17, issue.6, pp.775-787, 2007.
DOI : 10.6028/jres.101.007

A. Guery, F. Latourte, F. Hild, and S. Roux, Characterization of SEM speckle pattern marking and imaging distortion by digital image correlation, Measurement Science and Technology, vol.25, issue.1, 2014.
DOI : 10.1088/0957-0233/25/1/015401
URL : https://hal.archives-ouvertes.fr/hal-00947399

H. Lim, J. Carroll, C. Battaile, B. Boyce, and C. Weinberger, Quantitative comparison between experimental measurements and CP-FEM predictions of plastic deformation in a tantalum oligocrystal, International Journal of Mechanical Sciences, vol.92, issue.0, pp.98-108, 2015.
DOI : 10.1016/j.ijmecsci.2014.12.010

Q. Shi, F. Latourte, F. Hild, and S. Roux, Quaternion correlation for tracking crystal motions, Measurement Science and Technology, vol.27, issue.9, pp.957-0233095006
DOI : 10.1088/0957-0233/27/9/095006
URL : https://hal.archives-ouvertes.fr/hal-01383950

A. Acharya, J. L. Bassani, and A. Beaudoin, Geometrically necessary dislocations, hardening, and a simple gradient theory of crystal plasticity, Scripta Materialia, vol.48, issue.2, pp.167-172, 2003.
DOI : 10.1016/S1359-6462(02)00337-8

S. Wulfinghoff, S. Forest, and T. Böhlke, Strain gradient plasticity modeling of the cyclic behavior of laminate microstructures, Journal of the Mechanics and Physics of Solids, vol.79, 2015.
DOI : 10.1016/j.jmps.2015.02.008
URL : https://hal.archives-ouvertes.fr/hal-01149855

E. Héripré, M. Dexet, J. Crépin, L. Gélébart, A. Roos et al., Coupling between experimental measurements and polycrystal finite element calculations for micromechanical study of metallic materials, International Journal of Plasticity, vol.23, issue.9, pp.1512-1539, 2007.
DOI : 10.1016/j.ijplas.2007.01.009

A. Allais, M. Bornert, T. Bretheau, and D. Caldemaison, Experimental characterization of the local strain field in a heterogeneous elastoplastic material, Acta Metallurgica et Materialia, vol.42, issue.11, pp.3865-38800956, 1994.
DOI : 10.1016/0956-7151(94)90452-9
URL : https://hal.archives-ouvertes.fr/hal-01579363

T. Berfield, J. Patel, R. Shimmin, P. Braun, J. Lambros et al., Micro- and Nanoscale Deformation Measurement of Surface and Internal Planes via Digital Image Correlation, Experimental Mechanics, vol.1, issue.2, pp.51-62, 2007.
DOI : 10.1117/12.7973231

W. Scrivens, Y. Luo, M. Sutton, S. Collette, M. Myrick et al., Development of Patterns for Digital Image Correlation Measurements at Reduced Length Scales, Experimental Mechanics, vol.42, issue.3, pp.63-77, 2007.
DOI : 10.1016/0079-6816(72)90006-8

Z. Xu, X. Li, M. Sutton, and N. Li, Drift and spatial distortion elimination in atomic force microscopy images by the digital image correlation technique, The Journal of Strain Analysis for Engineering Design, vol.1, issue.8, p.420, 2008.
DOI : 10.1007/BF02427894

H. Teyssedre, S. Roux, G. Régnier, and A. Tracz, Filtering out slow-scan drifts in atomic force microscopy images, The Journal of Strain Analysis for Engineering Design, vol.46, issue.5, pp.361-367, 2011.
DOI : 10.1016/j.polymer.2009.06.023

J. Venables and R. , Bin-jaya, Accurate microcrystallography using electron back-scattering patterns
DOI : 10.1080/14786437708232955

F. Ram, S. Zaefferer, T. Jäpel, and D. Raabe, Error analysis of the crystal orientations and disorientations obtained by the classical electron backscatter diffraction technique, Journal of Applied Crystallography, vol.54, issue.703, pp.797-813, 2015.
DOI : 10.1016/j.actamat.2010.02.025

J. Kapur and D. Casasent, Geometric correction of sem images, Proc. SPIE, pp.165-176, 2000.

C. Wu, B. Adams, C. Bauer, D. Casasent, A. Morawiec et al., Mapping the mesoscale interface structure in polycrystalline materials, Ultramicroscopy, vol.93, issue.2, pp.99-109, 2002.
DOI : 10.1016/S0304-3991(02)00151-1

G. Nolze, Geometrically caused image distortion effects and their influence on interpretation of EBSD measurements, Materials Science and Technology, vol.38, issue.11, pp.1343-1351, 2006.
DOI : 10.1016/j.scriptamat.2004.10.040

G. Nolze, T. Hoc, J. Crépin, L. Gélébart, and A. Zaoui, Image distortions in SEM and their influences on EBSD measurements, Image distortions in SEM and their influences on EBSD measurements, pp.172-183, 2003.
DOI : 10.1016/j.ultramic.2006.07.003

A. Guery, F. Hild, F. Latourte, and S. Roux, Slip activities in polycrystals determined by coupling DIC measurements with crystal plasticity calculations, International Journal of Plasticity, vol.81, pp.249-266, 2016.
DOI : 10.1016/j.ijplas.2016.01.008
URL : https://hal.archives-ouvertes.fr/hal-01303523

H. Jin, W. Lu, S. Haldar, and H. Bruck, Microscale characterization of granular deformation near a crack tip, Journal of Materials Science, vol.15, issue.3, pp.6596-6602, 2011.
DOI : 10.1088/0960-1317/15/3/016

F. D. Gioacchino and J. Q. Da-fonseca, An experimental study of the polycrystalline plasticity of austenitic stainless steel, International Journal of Plasticity, vol.74, pp.92-109, 2015.
DOI : 10.1016/j.ijplas.2015.05.012

M. Sutton, Computer Vision-Based, Noncontacting Deformation Measurements in Mechanics: A Generational Transformation, Applied Mechanics Reviews, vol.65, issue.5
DOI : 10.1115/1.4024984

M. Sutton, W. Wolters, W. Peters, W. Ranson, and S. Mcneill, Determination of displacements using an improved digital correlation method, Image and Vision Computing, vol.1, issue.3, pp.133-1390262, 1983.
DOI : 10.1016/0262-8856(83)90064-1

Z. Khan-jetter and T. Chu, Three-dimensional displacement measurements using digital image correlation and photogrammic analysis, Experimental Mechanics, vol.8, issue.10, pp.10-16, 1990.
DOI : 10.1117/12.7972925

H. Schreier, M. Sutton, and J. Orteu, Image Correlation for Shape, Motion and Deformation Measurements: Basic Concepts Quantitative stereovision in a scanning electron microscope, Theory and Applications Experimental Mechanics, vol.51, issue.1, pp.460-97, 2009.
DOI : 10.1007/978-0-387-78747-3

B. Bay, T. Smith, M. Fyhrie, and . Saad, Digital volume correlation: Three-dimensional strain mapping using X-ray tomography, Experimental Mechanics, vol.27, issue.10???12, pp.217-226, 1999.
DOI : 10.2118/22943-PA

E. Verhulp, B. Van-rietbergen, R. Huiskes, S. Roux, F. Hild et al., A three-dimensional digital image correlation technique for strain measurements in microstructures Three-dimensional image correlation from x-ray computed tomography of solid foam, J. Biomech. Composites Part A: Applied Science and Manufacturing, vol.37, issue.398, pp.1313-1320, 2004.

F. Hild and S. Roux, Digital Image Correlation, pp.183-228, 2012.
URL : https://hal.archives-ouvertes.fr/hal-01728998

Z. Tomi?-cevi´ccevi´c, F. Hild, and S. Roux, Mechanics-aided digital image correlation, Journal of Strain Analysis for 475 Engineering Design, vol.48, pp.330-343, 2013.

J. Garnaes, L. Nielsen, K. Dirscherl, J. Jørgensen, J. Rasmussen et al., Two-dimensional nanometer-scale calibration based on one-dimensional gratings, Applied Physics A: Materials Science & Processing, vol.66, issue.7, pp.831-835, 1998.
DOI : 10.1007/s003390051251

Y. Sun and J. H. Pang, AFM image reconstruction for deformation measurements by digital image correlation, Nanotechnology, vol.17, issue.4, p.480
DOI : 10.1088/0957-4484/17/4/016

S. Zaefferer, On the formation mechanisms, spatial resolution and intensity of backscatter Kikuchi patterns, Ultramicroscopy, vol.107, issue.2-3, pp.254-266, 2007.
DOI : 10.1016/j.ultramic.2006.08.007

W. Wisniewski, S. Saager, A. Böbenroth, and C. , Experimental evidence concerning the significant information depth of electron backscatter diffraction (EBSD), Ultramicroscopy, vol.173, 2017.
DOI : 10.1016/j.ultramic.2016.11.004

F. Latourte, N. Rupin, M. He, A. Parrot, and S. Leclercq, Full Field Measurements used for Assessing Industrial Issues-Two Examples, Procedia IUTAM, vol.4, issue.0, pp.92-105, 2012.
DOI : 10.1016/j.piutam.2012.05.011
URL : https://doi.org/10.1016/j.piutam.2012.05.011

E. Héripré, Méthode de couplage multi-´ echelles entre simulations numériques polycristallines et mesures de 490 champs pour l'identification des paramètres de lois de comportement et de fissuration des matériaux métalliques. applicationàapplicationà l'´ etude des alliages TiAl, 2006.

A. Ma, F. Roters, D. Raabe, W. Abuzaid, M. Sangid et al., On the consideration of interactions between dislocations and grain boundaries in crystal plasticity finite element modeling ??? Theory, experiments, and simulations, Acta Materialia, vol.54, issue.8, pp.2181-2194, 2006.
DOI : 10.1016/j.actamat.2006.01.004

A. Guery, F. Hild, F. Latourte, and S. Roux, Identification of crystal plasticity parameters using DIC??measurements and weighted??FEMU, Mechanics of Materials, vol.100, pp.55-71, 2016.
DOI : 10.1016/j.mechmat.2016.06.007
URL : https://hal.archives-ouvertes.fr/hal-01383934

L. Morsdorf, O. Jeannin, D. Barbier, M. Mitsuhara, D. Raabe et al., Multiple mechanisms of lath martensite plasticity, Acta Materialia, vol.121, pp.202-214, 2016.
DOI : 10.1016/j.actamat.2016.09.006