D. Silva, C. Boccalini, and M. , Thermal cracking of multicomponent white cast iron, Mater Sci Technol, vol.21, pp.565-73, 2005.

W. S. Dai, M. Ma, and J. H. Chen, The thermal fatigue behavior and cracking characteristics of hot-rolling material, Mater Sci Eng A, vol.448, pp.25-32, 2007.

A. Persson, S. Hogmark, and J. Bergström, Thermal fatigue cracking of surface engineered hot work tool steels, Surf Coat Technol, vol.191, pp.216-243, 2005.

A. Srivastava, V. Joshi, and R. Shivpuri, Computer modeling and prediction of thermal fatigue cracking in die-casting tooling, Wear, vol.256, pp.38-43, 2004.

S. Jean, B. Miquel, L. Roux, S. Rézaï-aria, and F. , An investigation on heat checking of hot work tool steels, Proceedings of the 5th international tooling conference. Tool steels of the next century, pp.185-194, 1999.
URL : https://hal.archives-ouvertes.fr/hal-01799137

F. Medjedoub, G. Dour, F. Rézaï-aria, and P. Hairy, Damage to die casting dies through crazing by thermal fatigue: origins mechanisms and approaches, Fonderie Fondeur d'Aujourd'hui, vol.244, pp.22-37, 2005.
URL : https://hal.archives-ouvertes.fr/hal-01851435

M. Fazarinc, T. Muhi?, G. Kugler, and M. Ter?elj, Thermal fatigue properties of differently constructed functionally graded materials aimed for refurbishing of pressure-die-casting dies, Eng Fail Anal, vol.25, pp.238-287, 2012.

. Fig, Effect of maximum stress r max (a) and plastic strain De p (b) on the number of cycles N i to initiate the microscopic heat-checking, vol.18

D. Klob?ar and J. Tu?ek, Thermal stresses in aluminum alloy die casting dies, Comput Mater Sci, vol.43, pp.1147-54, 2008.

. Engler-pinto, . Cc, X. Su, J. V. Lasecki, X. Chen et al., Thermo-mechanical fatigue analysis of cast aluminum cylinder heads, Proceedings of materials science & technology conference, pp.1546-57, 2007.

Z. Mazur, A. Luna-ramírez, J. A. Juárez-islas, and A. Campos-amezcua, Failure analysis of a gas turbine blade made of Inconel 738LC alloy, Eng Fail Anal, vol.12, pp.474-86, 2005.

M. Kamaya and S. Taheri, A study on the evolution of crack networks under thermal fatigue loading, Nucl Eng Des, vol.238, pp.2147-54, 2008.
URL : https://hal.archives-ouvertes.fr/hal-00257765

A. Fissolo, S. Amiable, O. Ancelet, F. Mermaz, J. M. Stelmaszyk et al., Crack initiation under thermal fatigue: an overview of CEA experience. Part I: Thermal fatigue appears to be more damaging than uniaxial isothermal fatigue, Int J Fatigue, vol.31, pp.587-600, 2009.
URL : https://hal.archives-ouvertes.fr/hal-00438553

M. Salem, P. Lamesle, G. Dour, L. Roux, S. Rézaï-aria et al., Interaction between aluminizing, oxidation and thermal fatigue in aluminium die casting tool, Gutenberghaus, editor, Proceedings of the 9th international tooling conference, vol.2012, pp.357-64, 2012.
URL : https://hal.archives-ouvertes.fr/hal-01685124

F. Rézaï-aria, A. Oudin, S. Jean, B. Miquel, and P. Lamesle, An investigation on thermal and thermomechanical fatigue of X38CrMoV5 (AISI H11) tool steel, Proceedings of 21th international die casting congress & exposition (NADCA), pp.353-60, 2001.

F. Meyer-olbersleben, E. Jr, C. C. Rézaï-aria, and F. , On thermal fatigue of nickel-based superalloys, ASTM STP, vol.1263, pp.41-55, 1996.

H. L. Bernstein, T. S. Grant, M. Clung, R. C. Allen, and J. M. , Prediction of thermalmechanical fatigue life for gas turbine blades in electric power generation, ASTM STP, vol.1186, pp.212-250, 1993.

G. Dour, F. Medjedoub, L. Roux, S. Diaconu, G. Rézaï-aria et al., Normalized thermal stresses analysis to design a thermal fatigue experiment, J Therm Stress, vol.28, pp.1-16, 2005.
URL : https://hal.archives-ouvertes.fr/hal-01666712

L. Roux, S. Medjedoub, F. Dour, G. Rézaï-aria, and F. , Image analysis of microscopic crack patterns applied to thermal fatigue heat-checking of high temperature tool steels, Micron, vol.44, pp.347-58, 2013.
URL : https://hal.archives-ouvertes.fr/hal-01687308

F. Medjedoub, Détermination des paramètres influant sur le phénomène d'endommagement par fatigue thermique des moules en fonderie sous pression d'aluminium, 2004.

H. E. Evans and R. C. Lobb, Conditions for the initiation of oxide-scale cracking and spallation, Corros Sci, vol.24, pp.209-231, 1984.

W. Korneta, S. K. Mendiratta, and J. Monteiro, Topological and geometrical properties of crack patterns produced by the thermal shock in ceramics, Phys Rev E, vol.57, pp.3142-52, 1998.

M. Schütze, Protective oxide scales and their breakdown, 1997.

X. F. Zhu, B. Zhang, J. Gao, and G. P. Zhang, Evaluation of the crack-initiation strain of a Cu-Ni multilayer on a flexible substrate, Scripta Mater, vol.60, pp.178-81, 2009.

M. H. Zhao, R. Fu, D. Lu, and T. Y. Zhang, Critical thickness for cracking of Pb(Zr 0.53 Ti 0.47 )O 3 thin films deposited on Pt/Ti/Si(100) substrates, Acta Mater, vol.50, pp.4241-54, 2002.

N. E. Jansson, Y. Leterrier, and J. Månson, Modeling of multiple cracking and decohesion of a thin film on a polymer substrate, Eng Fract Mech, vol.73, pp.2614-2640, 2006.