M. Bayerlein and H. Mughrabi, Fatigue crack initiation and early crack growth in copper polycrystals?effects of temperature and environment. Short Fatigue Cracks, ESIS Mech. Eng. Publications, vol.13, pp.55-82, 1992.

R. Boettner, A. Mcevily, . Jr, and Y. Liu, On the formation of fatigue cracks at twin boundaries, Philosophical Magazine, vol.86, issue.103, pp.95-10610, 1080.
DOI : 10.1080/14786435808237045

A. Cerrone, A. Spear, J. Tucker, C. Stein, A. Rollett et al., Modeling crack nucleation at coherent twin boundaries in nickel?modeling crack nucleation at coherent twin boundaries in nickel-based superalloys, Mater Sci Technol, p.1649, 2013.

B. Cowles, High cycle fatigue in aircraft gas turbines???an industry perspective, International Journal of Fracture, vol.80, issue.4, pp.2-3147, 1989.
DOI : 10.1007/BF00012671

D. Davidson, R. Tryon, M. Oja, R. Matthews, R. Chandran et al., Fatigue Crack Initiation In WASPALOY at 20 ??C, Metallurgical and Materials Transactions A, vol.12, issue.13, pp.2214-2225, 2007.
DOI : 10.1179/026708396790121946

D. Gioacchino, F. , Q. Da-fonseca, and J. , Plastic Strain Mapping with Sub-micron Resolution Using Digital Image Correlation, Experimental Mechanics, vol.43, issue.236, pp.743-754, 2013.
DOI : 10.1243/03093247JSA400

M. Echlin and T. Pollock, A statistical sampling approach for measurement of fracture toughness parameters in a 4330 steel by 3-D femtosecond laser-based tomography, Acta Materialia, vol.61, issue.15, pp.5791-5799, 2013.
DOI : 10.1016/j.actamat.2013.06.023

M. Echlin, N. Husseini, J. Nees, and T. Pollock, A New Femtosecond Laser-Based Tomography Technique for Multiphase Materials, Advanced Materials, vol.94, issue.20, pp.2339-2342, 2011.
DOI : 10.1007/s00340-008-3343-5

M. Echlin, W. Lenthe, and T. Pollock, Three-dimensional sampling of material structure for property modeling and design, Integrating Materials and Manufacturing Innovation, vol.468, issue.1, 2014.
DOI : 10.1016/j.msea.2006.10.171

M. Echlin, M. Straw, S. Randolph, J. Filevich, and T. Pollock, The TriBeam system: Femtosecond laser ablation in situ SEM, Materials Characterization, vol.100, pp.1-12, 2015.
DOI : 10.1016/j.matchar.2014.10.023

S. Ghosh, G. Weber, and S. Keshavarz, Multiscale modeling of polycrystalline nickel-based superalloys accounting for subgrain microstructures, Mechanics Research Communications, vol.78, 2015.
DOI : 10.1016/j.mechrescom.2015.12.001

I. Gitman, H. Askes, and L. Sluys, Representative volume: Existence and size determination, Engineering Fracture Mechanics, vol.74, issue.16, pp.2518-2534, 2007.
DOI : 10.1016/j.engfracmech.2006.12.021

M. Groeber, B. Haley, M. Uchic, D. Dimiduk, and S. Ghosh, 3D reconstruction and characterization of polycrystalline microstructures using a FIB???SEM system, Materials Characterization, vol.57, issue.4-5, pp.4-5, 2006.
DOI : 10.1016/j.matchar.2006.01.019

M. Groeber, S. Ghosh, M. Uchic, and D. Dimiduk, A framework for automated analysis and simulation of 3D polycrystalline microstructures. Part 2: Synthetic structure generation???, Acta Materialia, vol.56, issue.6, pp.1274-1287, 2008.
DOI : 10.1016/j.actamat.2007.11.040

A. Heinz and P. Neumann, Crack initiation during high cycle fatigue of an austenitic steel, Acta Metallurgica et Materialia, vol.38, issue.10, pp.1933-1940, 1990.
DOI : 10.1016/0956-7151(90)90305-Z

R. Hill, Elastic properties of reinforced solids: Some theoretical principles, Journal of the Mechanics and Physics of Solids, vol.11, issue.5, pp.357-372, 1963.
DOI : 10.1016/0022-5096(63)90036-X

R. Jiang, F. Pierron, S. Octaviani, and P. Reed, Characterisation of strain localisation processes during fatigue crack initiation and early crack propagation by SEM-DIC in an advanced disc alloy, Materials Science and Engineering: A, vol.699, pp.128-144, 2017.
DOI : 10.1016/j.msea.2017.05.091

J. Jiang, T. Zhang, F. Dunne, and T. Britton, Deformation compatibility in a single crystalline Ni superalloy, Proc. R. Soc. A, 2016.
DOI : 10.1038/ncomms4580

A. Kammers and S. Daly, Self-Assembled Nanoparticle Surface Patterning for Improved Digital Image Correlation in a Scanning Electron Microscope, Experimental Mechanics, vol.17, issue.8, pp.1333-1341, 2013.
DOI : 10.1088/0957-0233/17/10/012

D. Krueger, R. Kissinger, and R. Menzies, Development and Introduction of a Damage Tolerant High Temperature Nickel-Base Disk Alloy, Rene'88DT, Superalloys 1992 (Seventh International Symposium), pp.277-286, 1992.
DOI : 10.7449/1992/Superalloys_1992_277_286

A. Kumar, C. Torbet, T. Pollock, and J. Jones, In situ characterization of fatigue damage evolution in a cast Al alloy via nonlinear ultrasonic measurements, Acta Materialia, vol.58, issue.6, pp.2143-2154, 2010.
DOI : 10.1016/j.actamat.2009.11.055

C. Laird and D. Duquette, Mechanisms of fatigue crack nucleation . Corrosion Fatigue, National Association of Corrosion Engineers, pp.88-117, 1972.

W. Lenthe, J. Stinville, M. Echlin, and T. Pollock, Statistical assessment of fatigue-initiating microstructural features in a polycristalline disk alloy, Superalloys, vol.2016, pp.569-577, 2016.

K. Li, N. Ashbaugh, and A. Rosenberger, Crystallographic initiation of nickel-base superalloy IN100 at RT and 538 ? C under low cycle fatigue conditions, p.251, 2004.

M. Lin, M. Fine, and T. Mura, Fatigue crack initiation on slip bands: Theory and experiment, Acta Metallurgica, vol.34, issue.4, pp.619-628, 1986.
DOI : 10.1016/0001-6160(86)90177-X

D. Mcdowell, S. Ghosh, and S. Kalidindi, Representation and computational structure-property relations of random media, JOM, vol.26, issue.3, pp.45-51, 2011.
DOI : 10.1016/j.ijplas.2009.08.001

J. Miao, T. Pollock, J. Jones, P. Caron, T. Gabb et al., Fatigue crack initiation in nickel-based superalloy rené 88 DT at 593 C, pp.589-597, 2008.

J. Miao, T. Pollock, W. Jones, and J. , Crystallographic fatigue crack initiation in nickel-based superalloy Ren?? 88DT at elevated temperature, Acta Materialia, vol.57, issue.20, pp.5964-5974, 2009.
DOI : 10.1016/j.actamat.2009.08.022

J. Miao, T. Pollock, W. Jones, and J. , Microstructural extremes and the transition from fatigue crack initiation to small crack growth in a polycrystalline nickel-base superalloy, Acta Materialia, vol.60, issue.6-7, pp.6-72840, 2012.
DOI : 10.1016/j.actamat.2012.01.049

W. Milligan, E. Orth, J. Schirra, and M. Savage, Effects of Microstructure on the High Temperature Constitutive Behavior of IN100, Superalloys 2004 (Tenth International Symposium), pp.331-339, 2004.
DOI : 10.7449/2004/Superalloys_2004_331_339

M. Mineur, P. Villechaise, and J. Mendez, Influence of the crystalline texture on the fatigue behavior of a 316L austenitic stainless steel, Materials Science and Engineering: A, vol.286, issue.2, pp.257-26810, 2000.
DOI : 10.1016/S0921-5093(00)00804-2

D. Morrison and J. Moosbrugger, Effects of grain size on cyclic plasticity and fatigue crack initiation in nickel, International Journal of Fatigue, vol.19, issue.93, pp.51-59, 1997.
DOI : 10.1016/S0142-1123(97)00034-0

H. Mughrabi, Specific features and mechanisms of fatigue in the ultrahigh-cycle regime, International Journal of Fatigue, vol.28, issue.11, pp.501-508, 2006.
DOI : 10.1016/j.ijfatigue.2005.05.018

H. Mughrabi, Cyclic Slip Irreversibilities and the Evolution of Fatigue Damage, Metallurgical and Materials Transactions A, vol.39, issue.436, pp.1257-1279, 2009.
DOI : 10.1080/01418618108239541

T. Mura and Y. Nakasone, A Theory of Fatigue Crack Initiation in Solids, Journal of Applied Mechanics, vol.57, issue.1, pp.1-6, 1990.
DOI : 10.1115/1.2888304

S. Niezgoda, D. Turner, D. Fullwood, and S. Kalidindi, Optimized structure based representative volume element sets reflecting the ensemble-averaged 2-point statistics, Acta Materialia, vol.58, issue.13, pp.4432-4445, 2010.
DOI : 10.1016/j.actamat.2010.04.041

M. Ostoja-starzewski, Material spatial randomness: From statistical to representative volume element, Probabilistic Engineering Mechanics, vol.21, issue.2, pp.112-132, 2006.
DOI : 10.1016/j.probengmech.2005.07.007

A. Pineau and S. Antolovich, High temperature fatigue of nickel-base superalloys ??? A review with special emphasis on deformation modes and oxidation, Engineering Failure Analysis, vol.16, issue.8, pp.2668-2697, 2009.
DOI : 10.1016/j.engfailanal.2009.01.010
URL : https://hal.archives-ouvertes.fr/hal-00423793

J. Polak, Cyclic deformation, crack initiation, and low cycle fatigue, Compr Struct Inegrity, vol.4, pp.1-39, 2003.

T. Pollock and S. Tin, Nickel-Based Superalloys for Advanced Turbine Engines: Chemistry, Microstructure and Properties, Journal of Propulsion and Power, vol.56, issue.3, pp.361-374, 2006.
DOI : 10.1007/BF02666354

S. Qidwai, D. Turner, S. Niezgoda, A. Lewis, A. Geltmacher et al., Estimating the response of polycrystalline materials using sets of weighted statistical volume elements, Acta Materialia, vol.60, issue.13-14, pp.5284-5299, 2012.
DOI : 10.1016/j.actamat.2012.06.026

R. Reed, The superalloys: fundamentals and applications, 2006.
DOI : 10.1017/CBO9780511541285

D. Rosca, A. Morawiec, D. Graef, and M. , A new method of constructing a grid in the space of 3D rotations and its applications to texture analysis, Modelling and Simulation in Materials Science and Engineering, vol.22, issue.7, p.75013, 2014.
DOI : 10.1088/0965-0393/22/7/075013

Z. Shan and A. Gokhale, Representative volume element for non-uniform micro-structure, Computational Materials Science, vol.24, issue.3, pp.361-379, 2002.
DOI : 10.1016/S0927-0256(01)00257-9

A. Shyam, C. Torbet, S. Jha, J. Larsen, M. Caton et al., Development of Ultrasonic Fatigue for Rapid, High Temperature Fatigue Studies in Turbine Engine Materials, Superalloys 2004 (Tenth International Symposium), pp.259-268, 2004.
DOI : 10.7449/2004/Superalloys_2004_259_268

C. Stein, S. Lee, and A. Rollett, An analysis of fatigue crack initiation using 2D orientation mapping and full-field simulation of elastic stress response, superalloys, 2012.

C. Stein, A. Cerrone, T. Ozturk, S. Lee, P. Kenesei et al., Fatigue crack initiation, slip localization and twin boundaries in a nickel-based superalloy, Current Opinion in Solid State and Materials Science, vol.18, issue.4, pp.244-252, 2014.
DOI : 10.1016/j.cossms.2014.06.001

J. Stinville, W. Lenthe, J. Miao, and T. Pollock, A combined grain scale elastic???plastic criterion for identification of fatigue crack initiation sites in a twin containing polycrystalline nickel-base superalloy, Acta Materialia, vol.103, pp.461-473, 2015.
DOI : 10.1016/j.actamat.2015.09.050

J. Stinville, N. Vanderesse, F. Bridier, P. Bocher, and T. Pollock, High resolution mapping of strain localization near twin boundaries in a nickel-based superalloy, Acta Materialia, vol.98, pp.29-42, 2015.
DOI : 10.1016/j.actamat.2015.07.016

S. Swaminathan, S. Ghosh, and N. Pagano, Statistically Equivalent Representative Volume Elements for Unidirectional Composite Microstructures: Part I - Without Damage, Journal of Composite Materials, vol.307, issue.1, pp.583-604, 2006.
DOI : 10.1007/978-1-4757-6355-3

K. Tanaka and T. Mura, A Dislocation Model for Fatigue Crack Initiation, Journal of Applied Mechanics, vol.48, issue.1, pp.97-103, 1981.
DOI : 10.1115/1.3157599

D. Texier, A. Gómez, S. Pierret, J. Franchet, T. Pollock et al., Microstructural Features Controlling the Variability in Low-Cycle Fatigue Properties of Alloy Inconel 718DA at Intermediate Temperature, Metallurgical and Materials Transactions A, vol.12, issue.3, pp.1096-1109, 2016.
DOI : 10.1007/BF02643481
URL : https://hal.archives-ouvertes.fr/hal-01644848

N. Thompson, N. Wadsworth, and N. Louat, Xi. The origin of fatigue fracture in copper, Philosophical Magazine, vol.65, issue.2, pp.113-126, 1956.
DOI : 10.1080/00018735200101161
URL : https://hal.archives-ouvertes.fr/in2p3-00115430

. Vic-2d, . Columbia, S. Wong, and P. Dawson, Influence of directional strengthto-stiffness on the elastic-plastic transition of fcc polycrystals under uniaxial tensile loading, Acta Mater, vol.58, issue.5, pp.1658-1678, 2009.

S. Yeratapally, M. Glavicic, M. Hardy, and M. Sangid, Microstructure based fatigue life prediction framework for polycrystalline nickel-base superalloys with emphasis on the role played by twin boundaries in crack initiation, Acta Materialia, vol.107, 2016.
DOI : 10.1016/j.actamat.2016.01.038