J. Miao, T. Pollock, and J. Jones, Crystallographic fatigue crack initiation in nickel-based superalloy Ren?? 88DT at elevated temperature, Acta Materialia, vol.57, issue.20, pp.5964-5974, 2009.
DOI : 10.1016/j.actamat.2009.08.022

J. Miao, T. Pollock, and J. Jones, Microstructural extremes and the transition from fatigue crack initiation to small crack growth in a polycrystalline nickel-base superalloy, Acta Materialia, vol.60, issue.6-7, pp.2840-2854, 2012.
DOI : 10.1016/j.actamat.2012.01.049

A. Pineau and S. Antolovich, High temperature fatigue of nickel-base superalloys ??? A review with special emphasis on deformation modes and oxidation, Special issue honouring Professor Manuel Elices on the occasion of his 70th birthday, pp.2668-2697, 2009.
DOI : 10.1016/j.engfailanal.2009.01.010
URL : https://hal.archives-ouvertes.fr/hal-00423793

G. Viswanathan, P. Sarosi, M. Henry, D. Whitis, W. Milligan et al., Investigation of creep deformation mechanisms at intermediate temperatures in Ren?? 88 DT, Acta Materialia, vol.53, issue.10, 2005.
DOI : 10.1016/j.actamat.2005.03.017

C. Déprés, M. Fivel, and L. Tabourot, A dislocation-based model for low-amplitude fatigue behaviour of face-centred cubic single crystals, Scripta Materialia, vol.58, issue.12, pp.1086-1089, 2008.
DOI : 10.1016/j.scriptamat.2008.02.027

S. Ghosh, G. Weber, and S. Keshavarz, Multiscale modeling of polycrystalline nickel-based superalloys accounting for subgrain microstructures, Mechanics Research Communications, vol.78, 2015.
DOI : 10.1016/j.mechrescom.2015.12.001

A. Cerrone, A. Spear, J. Tucker, C. Stein, A. Rollett et al., ) Modeling crack nucleation at coherent twin boundaries in nickel-based superalloys, In: Materials science and technology, 2013.

C. Stein, A. Cerrone, T. Ozturk, S. Lee, P. Kenesei et al., Fatigue crack initiation, slip localization and twin boundaries in a nickel-based superalloy, S1359028614000370. Slip Localization and Transfer in Deformation and Fatigue of Polycrystals, pp.244-252, 2014.
DOI : 10.1016/j.cossms.2014.06.001

M. Zhang, F. Bridier, P. Villechaise, J. Mendez, and D. Mcdowell, Simulation of slip band evolution in duplex Ti???6Al???4V, Acta Materialia, vol.58, issue.3, pp.1087-1096, 2010.
DOI : 10.1016/j.actamat.2009.10.025

Z. Zhao, R. M. Raabe, D. Cuitiño, A. Radovitzky, and R. , Investigation of three-dimensional aspects of grain-scale plastic surface deformation of an aluminum oligocrystal, International Journal of Plasticity, vol.24, issue.12, pp.2278-2297, 2008.
DOI : 10.1016/j.ijplas.2008.01.002

T. Merzouki, C. Collard, N. Bourgeois, T. Zineb, and F. Meraghni, Coupling between measured kinematic fields and multicrystal SMA finite element calculations, Mechanics of Materials, vol.42, issue.1, pp.72-95, 2010.
DOI : 10.1016/j.mechmat.2009.09.003

E. Héripré, M. Dexet, J. Crépin, L. Gélébart, A. Roos et al., Coupling between experimental measurements and polycrystal finite element calculations for micromechanical study of metallic materials, International Journal of Plasticity, vol.23, issue.9, pp.1512-1539, 2007.
DOI : 10.1016/j.ijplas.2007.01.009

J. Walley, R. Wheeler, M. Uchic, and M. Mills, In-Situ Mechanical Testing for Characterizing Strain Localization During Deformation at Elevated Temperatures, Experimental Mechanics, vol.32, issue.11, pp.405-416, 2012.
DOI : 10.1557/mrs2007.63

J. Carroll, W. Abuzaid, J. Lambros, and H. Sehitoglu, High resolution digital image correlation measurements of strain accumulation in fatigue crack growth, S0142112312002113. Fatigue and Microstructure: A special issue on recent advances, pp.140-150, 2013.
DOI : 10.1016/j.ijfatigue.2012.06.010

J. Carroll, B. Clark, T. Buchheit, B. Boyce, and C. Weinberger, An experimental statistical analysis of stress projection factors in BCC tantalum, Materials Science and Engineering: A, vol.581, issue.0, pp.108-118, 2013.
DOI : 10.1016/j.msea.2013.05.085

D. Raabe, M. Sachtleber, Z. Zhao, F. Roters, and S. Zaefferer, Micromechanical and macromechanical effects in grain scale polycrystal plasticity experimentation and simulation, Acta Materialia, vol.49, issue.17, pp.3433-3441, 2001.
DOI : 10.1016/S1359-6454(01)00242-7

F. Delaire, J. Raphanel, and C. Rey, Plastic heterogeneities of a copper multicrystal deformed in uniaxial tension: experimental study and finite element simulations, Acta Materialia, vol.48, issue.5, pp.1075-1087, 2000.
DOI : 10.1016/S1359-6454(99)00408-5
URL : https://hal.archives-ouvertes.fr/hal-00111290

H. Jin, L. Wei-yang, S. Haldar, and H. Bruck, Microscale characterization of granular deformation near a crack tip, Journal of Materials Science, vol.15, issue.3, pp.6596-6602, 2011.
DOI : 10.1088/0960-1317/15/3/016

A. Kammers and S. Daly, Digital Image Correlation under Scanning Electron Microscopy: Methodology and Validation, Experimental Mechanics, vol.39, issue.9, 2013.
DOI : 10.1117/1.1314593

D. Gioacchino, F. , Q. Da-fonseca, and J. , Plastic Strain Mapping with Sub-micron Resolution Using Digital Image Correlation, Experimental Mechanics, vol.43, issue.236, pp.743-754, 2013.
DOI : 10.1243/03093247JSA400

L. Patriarca, W. Abuzaid, H. Sehitoglu, and H. Maier, Slip transmission in bcc FeCr polycrystal, Materials Science and Engineering: A, vol.588, issue.0, pp.308-317, 2013.
DOI : 10.1016/j.msea.2013.08.050

A. Kammers and S. Daly, Self-Assembled Nanoparticle Surface Patterning for Improved Digital Image Correlation in a Scanning Electron Microscope, Experimental Mechanics, vol.17, issue.8, pp.1333-1341, 2013.
DOI : 10.1088/0957-0233/17/10/012

J. Stinville, M. Echlin, D. Texier, F. Bridier, P. Bocher et al., Sub-Grain Scale Digital Image Correlation by Electron Microscopy for Polycrystalline Materials during Elastic and Plastic Deformation, Experimental Mechanics, vol.3, issue.1, pp.1-20, 2015.
DOI : 10.1186/s40192-014-0021-9
URL : https://hal.archives-ouvertes.fr/hal-01644841

M. Echlin, J. Stinville, V. Miller, W. Lenthe, and T. Pollock, Incipient slip and long range plastic strain localization in microtextured Ti-6Al-4V titanium, Acta Materialia, vol.114, 2016.
DOI : 10.1016/j.actamat.2016.04.057

J. Esquivel and M. Sangid, Digital Image Correlation of Heterogeneous Deformation in Polycrystalline Material with Electron Backscatter Diffraction, Microscopy and Microanalysis, vol.21, issue.S3, pp.1167-1168, 2015.
DOI : 10.1007/s11340-013-9782-x

J. Stinville, N. Vanderesse, F. Bridier, P. Bocher, and T. Pollock, High resolution mapping of strain localization near twin boundaries in a nickel-based superalloy, Acta Materialia, vol.98, pp.29-42, 2015.
DOI : 10.1016/j.actamat.2015.07.016

J. Stinville, W. Lenthe, J. Miao, and T. Pollock, A combined grain scale elastic???plastic criterion for identification of fatigue crack initiation sites in a twin containing polycrystalline nickel-base superalloy, Acta Materialia, vol.103, pp.461-473, 2016.
DOI : 10.1016/j.actamat.2015.09.050

J. Jiang, T. Zhang, F. Dunne, and T. Britton, Deformation compatibility in a single crystalline Ni superalloy, Proceedings of the Royal Society A: Mathematical, Physical and Engineering Science, vol.90, issue.703, p.472, 2016.
DOI : 10.1038/ncomms4580

R. Reed, The superalloys: fundamentals and applications, 2006.
DOI : 10.1017/CBO9780511541285

D. Krueger, R. Kissinger, and R. Menzies, Development and Introduction of a Damage Tolerant High Temperature Nickel-Base Disk Alloy, Rene'88DT, Superalloys 1992 (Seventh International Symposium), pp.277-286, 1992.
DOI : 10.7449/1992/Superalloys_1992_277_286

J. Miao, T. Pollock, J. Jones, R. Reed, K. Green et al., Fatigue crack initiation in nickel-based superalloy René 88 dt at 593 c, pp.589-597, 2008.

W. Lenthe, J. Stinville, M. Echlin, and T. Pollock, Statistical Assessment of Fatigue-Initiating Microstructural Features in a Polycrystalline Disk Alloy, 13th International symposium on superalloys, p.page Accepted, 2016.
DOI : 10.1017/S1431927606060090

D. Texier, A. Gómez, S. Pierret, J. Franchet, T. Pollock et al., Microstructural Features Controlling the Variability in Low-Cycle Fatigue Properties of Alloy Inconel 718DA at Intermediate Temperature, Metallurgical and Materials Transactions A, vol.12, issue.3, pp.1096-1109, 2016.
DOI : 10.1007/BF02643481
URL : https://hal.archives-ouvertes.fr/hal-01644848

W. Milligan, E. Orth, J. Schirra, and M. Savage, Effects of microstructure on the high temperature constitutive behavior of in 100, pp.331-339, 2004.

K. Li, N. Ashbaugh, and A. Rosenberger, Crystallographic initiation of nickel-base superalloy in100 at rt and 538 c under low cycle fatigue conditions. Superalloys Champ Pennsy, pp.251-258, 2004.

R. Mahesh, R. Jayaganthan, and S. Prakash, Oxidation behaviour of selected Ni- and Fe- based superalloys in air at 900??C under cyclic conditions, Transactions of the Indian Institute of Metals, vol.44, issue.2???3, pp.45-49, 2008.
DOI : 10.2355/isijinternational.44.139

M. Brumm and H. Grabke, The oxidation behaviour of NiAl-I. Phase transformations in the alumina scale during oxidation of NiAl and NiAl-Cr alloys, Corrosion Science, vol.33, issue.11, pp.1677-1690, 1992.
DOI : 10.1016/0010-938X(92)90002-K

S. Cruchley, H. Evans, M. Taylor, M. Hardy, and S. Stekovic, Chromia layer growth on a Ni-based superalloy: Sub-parabolic kinetics and the role of titanium, Corrosion Science, vol.75, pp.58-66, 2013.
DOI : 10.1016/j.corsci.2013.05.016

J. Chen, P. Rogers, and J. Little, Oxidation behavior of several chromia-forming commercial nickel-base superalloys, Oxidation of Metals, vol.24, issue.5-6, pp.5-6381, 1997.
DOI : 10.1007/BF00352151

G. Greene and C. Finfrock, Oxidation of inconel 718 in air at high temperatures, Oxidation of Metals, vol.55, issue.5/6, pp.505-521, 2001.
DOI : 10.1023/A:1010359815550

G. Wallwork and A. Hed, Some limiting factors in the use of alloys at high temperatures, Oxidation of Metals, vol.1, issue.2, pp.171-184, 1971.
DOI : 10.1007/BF00603485

M. Munro, Evaluated Material Properties for a Sintered alpha-Alumina, Journal of the American Ceramic Society, vol.20, issue.01, pp.1919-1928, 1997.
DOI : 10.1007/978-94-011-3388-3_34

M. Sutton, J. Orteu, and H. Schreier, Image correlation for shape, motion and deformation measurements: basic concepts, theory and applications, 2009.

J. Hutchinson and Z. Suo, Mixed Mode Cracking in Layered Materials, Adv Appl Mech, vol.29, issue.63, p.191, 1992.
DOI : 10.1016/S0065-2156(08)70164-9

R. Jackson, D. Lipkin, and T. Pollock, Thermal barrier coating adherence to Hf-modified B2 NiAl bond coatings, Acta Materialia, vol.80, pp.39-47, 2014.
DOI : 10.1016/j.actamat.2014.07.033

D. Jorgensen, A. Suzuki, D. Lipkin, T. Pollock, X. Pang et al., Sulfur and minor element effects on the oxidation of bilayer ? + ß bond coats for thermal barrier coatings on rené n5 Wiley Online Library 48 Microstructure and mechanical properties of chromium oxide coatings Investigation of microstructure and mechanical properties of multi-layer cr/cr2o3 coatings, Superalloys 2016: Proceedings of the 13th intenational symposium of superalloys, pp.131-1403531, 2007.

A. Heinz and P. Neumann, Crack initiation during high cycle fatigue of an austenitic steel, Acta Metallurgica et Materialia, vol.38, issue.10, pp.1933-1940, 1990.
DOI : 10.1016/0956-7151(90)90305-Z

P. Villechaise, J. Cormier, T. Billot, and J. Mendez, Mechanical behaviour and damage processes of udimet 720li: influence of localized plasticity at grain boundaries, 12th International symposium on superalloys, pp.15-24, 2012.

W. Abuzaid, M. Sangid, J. Carroll, H. Sehitoglu, and J. Lambros, Slip transfer and plastic strain accumulation across grain boundaries in Hastelloy X, Journal of the Mechanics and Physics of Solids, vol.60, issue.6, pp.1201-1220, 2012.
DOI : 10.1016/j.jmps.2012.02.001

A. Khan, M. Sundarrajan, S. Natarajan, S. Parameswaran, P. Mohandas et al., Oxidation and Hot Corrosion Behavior of Nickel-Based Superalloy for Gas Turbine Applications, Materials and Manufacturing Processes, vol.131, issue.6, pp.832-839, 2014.
DOI : 10.1016/j.matdes.2011.01.017

S. Antolovish, Microsctrutural aspects of fatigue in ni-base superalloys, 2015.

R. Molins, G. Hochstetter, J. Chassaigne, and E. Andrieu, Oxidation effects on the fatigue crack growth behaviour of alloy 718 at high temperature, Acta Materialia, vol.45, issue.2, pp.663-674, 1997.
DOI : 10.1016/S1359-6454(96)00192-9