S. Abrate, Impact on composite structures, 1998.
DOI : 10.1017/CBO9780511574504

S. Petit, C. Bouvet, A. Bergerot, and J. Barrau, Impact and compression after impact experimental study of a composite laminate with a cork thermal shield, Composites Science and Technology, vol.67, issue.15-16, pp.3286-3299, 2007.
DOI : 10.1016/j.compscitech.2007.03.032

URL : https://hal.archives-ouvertes.fr/hal-00509042

D. Zheng and W. Binienda, Effect of permanent indentation on the delamination threshold for small mass impact on plates, International Journal of Solids and Structures, vol.44, issue.25-26, pp.25-268143, 2007.
DOI : 10.1016/j.ijsolstr.2007.06.005

O. Eve, Etude du comportement des structures composites endommagées par un impact basse vitesse, Thèse de doctorat, 1999.

O. Allix and L. Blanchard, Mesomodeling of delamination: towards industrial applications, Composites Science and Technology, vol.66, issue.6, pp.731-744, 2006.
DOI : 10.1016/j.compscitech.2004.12.023

URL : https://hal.archives-ouvertes.fr/hal-00022558

H. Choi and K. Chang, A Model for Predicting Damage in Graphite/Epoxy Laminated Composites Resulting from Low-Velocity Point Impact, Journal of Composite Materials, vol.10, issue.6, pp.2134-2169, 1992.
DOI : 10.1007/BF02084907

D. Moura, M. Gonçalves, and S. , Modelling the interaction between matrix cracking and delamination in carbon???epoxy laminates under low velocity impact, Composites Science and Technology, vol.64, issue.7-8, pp.1021-1027, 2004.
DOI : 10.1016/j.compscitech.2003.08.008

S. Guinard, O. Allix, D. Guédra-degeorges, and A. Vinet, A 3D damage analysis of low-velocity impacts on laminated composites, Composites Science and Technology, vol.62, issue.4, pp.585-589, 2002.
DOI : 10.1016/S0266-3538(01)00153-1

M. Mulle, R. Zitoune, F. Collombet, L. Robert, and Y. Grunevald, Embedded FBGs and 3-D DIC for the stress analysis of a structural specimen subjected to bending, Composite Structures, vol.91, issue.1, pp.48-55, 2009.
DOI : 10.1016/j.compstruct.2009.04.033

J. Rouchon, The fatigue and damage tolerance aspects for composite aircraft structures, Proceedings of ICAF symposium, 1995.

R. Alderliesten, Damage tolerance of bonded aircraft structures, International Journal of Fatigue, vol.31, issue.6, pp.1024-1030, 2008.
DOI : 10.1016/j.ijfatigue.2008.05.001

A. Tropis, M. Thomas, J. Bounie, and P. Lafon, Certification of the Composite Outer Wing of the ATR72, Proceedings of the Institution of Mechanical Engineers, Part G: Journal of Aerospace Engineering, vol.82, issue.4, pp.327-339, 1994.
DOI : 10.1243/PIME_PROC_1995_209_307_02

F. Chang and K. Chang, A progressive damage model for laminate composites containing stress concentrations, J Comp Mat, pp.834-855, 1987.
DOI : 10.1177/002199838702100904

F. Aymerich, Characterization of fracture modes in stitched and unstitched cross-ply laminates subjected to low-velocity impact and compression after impact loading, International Journal of Impact Engineering, vol.35, issue.7, pp.591-608, 2008.
DOI : 10.1016/j.ijimpeng.2007.02.009

M. Renault, Compression après impact d'une plaque stratifiée carboné epoxyde ? Etude expérimentale et modélisationmodélisation´modélisationéléments finis associée, 1994.

C. Lopes, P. Camanho, Z. Gürdal, P. Maimí, and E. González, Low-velocity impact damage on dispersed stacking sequence laminates. Part II: Numerical simulations, Composites Science and Technology, vol.69, issue.7-8, pp.7-8937, 2009.
DOI : 10.1016/j.compscitech.2009.02.015

A. Faggiani and B. Falzon, Predicting low-velocity impact damage on a stiffened composite panel, Composites Part A: Applied Science and Manufacturing, vol.41, issue.6, pp.737-749, 2010.
DOI : 10.1016/j.compositesa.2010.02.005

P. Geubelle and S. Jeffrey, Impact-induced delamination of composites: a 2D simulation, Composites Part B: Engineering, vol.29, issue.5, pp.589-602, 1998.
DOI : 10.1016/S1359-8368(98)00013-4

F. Aymerich, F. Dore, and P. Priolo, Simulation of multiple delaminations in impacted cross-ply laminates using a finite element model based on cohesive interface elements, Composites Science and Technology, vol.69, issue.11-12, pp.1699-1709, 2009.
DOI : 10.1016/j.compscitech.2008.10.025

M. Wisnom, Modelling discrete failures in composites with interface elements, Composites Part A: Applied Science and Manufacturing, vol.41, issue.7, pp.795-805, 2010.
DOI : 10.1016/j.compositesa.2010.02.011

G. Davies and R. Olsson, Impact on composite structures, The Aeronautical Journal, vol.108, issue.1089, pp.541-563, 2004.
DOI : 10.1017/S0001924000000385

Y. Aoki, H. Suemasu, and T. Ishikawa, Damage propagation in CFRP laminates subjected to low velocity impact and static indentation, Advanced Composite Materials, vol.12, issue.1, pp.45-61, 2007.
DOI : 10.1017/CBO9780511574504

R. Borg, L. Nilsson, and K. Simonsson, Simulation of low velocity impact on fiber laminates using a cohesive zone based delamination model, Composites Science and Technology, vol.64, issue.2, pp.279-288, 2004.
DOI : 10.1016/S0266-3538(03)00256-2

P. Ladeveze, G. Lubineau, and D. Marsal, Towards a bridge between the micro- and mesomechanics of delamination for laminated composites, Composites Science and Technology, vol.66, issue.6, pp.698-712, 2006.
DOI : 10.1016/j.compscitech.2004.12.026

URL : https://hal.archives-ouvertes.fr/hal-00022557

Y. Zhang, P. Zhu, and X. Lai, Finite element analysis of low-velocity impact damage in composite laminated plates, Materials & Design, vol.27, issue.6, pp.513-519, 2006.
DOI : 10.1016/j.matdes.2004.11.014

L. Lammerant and I. Verpoest, Modelling of the interaction between matrix cracks and delaminations during impact of composite plates, Composites Science and Technology, vol.56, issue.10, pp.1171-1178, 1996.
DOI : 10.1016/S0266-3538(96)00071-1

V. Tita, J. Carvalho, and D. Vandepitte, Failure analysis of low velocity impact on thin composite laminates: Experimental and numerical approaches, Composite Structures, vol.83, issue.4, pp.413-428, 2008.
DOI : 10.1016/j.compstruct.2007.06.003

H. Johnson, L. Louca, S. Mouring, and A. Fallah, Modelling impact damage in marine composite panels, International Journal of Impact Engineering, vol.36, issue.1, pp.25-39, 2009.
DOI : 10.1016/j.ijimpeng.2008.01.013

URL : https://hal.archives-ouvertes.fr/hal-00545294

L. Iannucci and M. Willows, An energy based damage mechanics approach to modelling impact onto woven composite materials???Part I: Numerical models, Composites Part A: Applied Science and Manufacturing, vol.37, issue.11, pp.2041-2056, 2006.
DOI : 10.1016/j.compositesa.2005.12.013

L. Iannucci and M. Willows, An energy based damage mechanics approach to modelling impact onto woven composite materials: Part II. Experimental and numerical results, Composites Part A: Applied Science and Manufacturing, vol.38, issue.2, pp.540-554, 2007.
DOI : 10.1016/j.compositesa.2006.02.023

C. Bouvet, B. Castanié, M. Bizeul, and J. Barrau, Low velocity impact modeling in laminate composite panels with discrete interface elements, Int J Sol Struct, vol.46, pp.14-152809, 2009.
DOI : 10.1016/j.ijsolstr.2009.03.010

URL : https://doi.org/10.1016/j.ijsolstr.2009.03.010

C. Ha-minh, T. Kanit, F. Boussu, and I. Abdellatif, Numerical multi-scale modeling for textile woven fabric against ballistic impact, Computational Materials Science, vol.50, issue.7, pp.2172-2184, 2011.
DOI : 10.1016/j.commatsci.2011.02.029

URL : https://hal.archives-ouvertes.fr/hal-00643235

Y. Mi, M. Crisfield, and G. Davies, Progressive Delamination Using Interface Elements, Journal of Composite Materials, vol.24, issue.6, pp.1246-1272, 1998.
DOI : 10.1177/002199839002400902

P. Prombut, Caractérisation de la propagation de délaminage des stratifiés composites multidirectionnels, Thèse de doctorat, 2007.

P. Prombut, L. Michel, F. Lachaud, and J. Barrau, Delamination of multidirectional composte laminates at 0 ? /theta ? ply interfaces, Eng Fract Mech, vol.7, pp.2427-2442, 2006.

L. Raimondo, L. Iannucci, P. Robinson, and P. Curtis, A progressive failure model for mesh-size-independent FE analysis of composite laminates subject to low-velocity impact damage, Composites Science and Technology, vol.72, issue.5, pp.624-632, 2012.
DOI : 10.1016/j.compscitech.2012.01.007

Z. Hashin and A. Rotem, A Fatigue Failure Criterion for Fiber Reinforced Materials, Journal of Composite Materials, vol.4, issue.4, pp.448-464, 1973.
DOI : 10.1177/002199836800200102

Z. Hashin, Failure Criteria for Unidirectional Fiber Composites, Journal of Applied Mechanics, vol.47, issue.2, pp.329-334, 1980.
DOI : 10.1115/1.3153664

S. Pinho, P. Robinson, and L. Iannucci, Fracture toughness of the tensile and compressive fibre failure modes in laminated composites, Composites Science and Technology, vol.66, issue.13, pp.2069-2079, 2006.
DOI : 10.1016/j.compscitech.2005.12.023

Z. Bazant and B. Oh, Progressive Carck and band theory for fracture of concrete, Mater Struct, vol.16, pp.155-177, 1983.

I. Lapczyk and J. Hurtado, Progressive damage modeling in fiber-reinforced materials, Composites Part A: Applied Science and Manufacturing, vol.38, issue.11, pp.2333-2341, 2007.
DOI : 10.1016/j.compositesa.2007.01.017

Y. Shi, T. Swait, and C. Soutis, Modelling damage evolution in composite laminates subjected to low velocity impact, Composite Structures, vol.94, issue.9, pp.2902-2913, 2012.
DOI : 10.1016/j.compstruct.2012.03.039

Q. Yang and B. Cox, Cohesive models for damage evolution in laminated composites, International Journal of Fracture, vol.57, issue.122, pp.107-137, 2005.
DOI : 10.1098/rspa.1997.0029

S. Pinho, Modelling failure of laminated composites using physically-based failure models, 2005.

W. Guocai, Y. Jenn-ming, and H. Hahn, The impact properties and damage tolerance of bi-directionally reinforced fiber metal laminates, J Mater Sci, vol.42, pp.948-957, 2007.

B. Wardle and P. Lagace, On the Use of Dent Depth as an Impact Damage Metric for Thin Composite Structures, Journal of Reinforced Plastics and Composites, vol.12, issue.5, pp.1093-1110, 1997.
DOI : 10.1177/073168449301200508

P. Chen, Z. Shen, J. Xiong, S. Yang, S. Fu et al., Failure mechanisms of laminated composites subjected to static indentation, Composite Structures, vol.75, issue.1-4, pp.489-495, 2006.
DOI : 10.1016/j.compstruct.2006.04.087

A. Nettles and M. Douglas, A Comparison of Quasi-Static Indentation Testing to Low Velocity Impact Testing, ASTM, Composite Materials: testing, design and acceptance criteria 1416, pp.116-130, 2002.
DOI : 10.1520/STP10634S

D. Chang and R. Khetan, Surface Damage of Steel, Aluminum, and Chopped-Fiber Composite Panels Due to Projectile Impact, Journal of Reinforced Plastics and Composites, vol.17, issue.3, pp.193-203, 1997.
DOI : 10.1177/002199838301700206

G. Caprino, A. Langella, and A. Lopresto, Indentation and penetration of carbon fibre reinforced plastic laminates, Composites Part B: Engineering, vol.34, issue.4, pp.319-325, 2003.
DOI : 10.1016/S1359-8368(03)00002-7

B. Fiedler, M. Hojo, S. Ochiai, K. Schulte, and M. Ando, Failure behavior of an epoxy matrix under different kinds of static loading, Composites Science and Technology, vol.61, issue.11, pp.1615-1624, 2001.
DOI : 10.1016/S0266-3538(01)00057-4

A. Abdallah, C. Bouvet, S. Rivallant, B. Broll, and J. Barrau, Experimental analysis of damage creation and permanent indentation on highly oriented plates, Composites Science and Technology, vol.69, issue.7-8, pp.7-81238, 2009.
DOI : 10.1016/j.compscitech.2009.02.029

R. Olsson, Analytical model for delamination growth during small mass impact on plates, International Journal of Solids and Structures, vol.47, issue.21, pp.2882-2892, 2010.
DOI : 10.1016/j.ijsolstr.2010.06.015

M. Ilyas, C. Espinosa, F. Lachaud, and M. Salaün, Modelling Aeronautical Composite Laminates Behaviour under Impact Using a Saturation Damage and Delamination Continuous Material Model, Key Engineering Materials, vol.452, issue.453, pp.369-372, 2011.
DOI : 10.4028/www.scientific.net/KEM.452-453.369

J. Curtis, M. Hinton, S. Li, S. Reid, and P. Soden, Damage, deformation and residual burst strength of filament-wound composite tubes subjected to impact or quasi-static indentation, Composites Part B: Engineering, vol.31, issue.5, pp.419-433, 2000.
DOI : 10.1016/S1359-8368(00)00014-7

G. Belingardi and R. Vadori, Influence of the laminate thickness in low velocity impact behavior of composite material plate, Composite Structures, vol.61, issue.1-2, pp.27-38, 2003.
DOI : 10.1016/S0263-8223(03)00027-8

P. Sjoblom, T. Hartnes, and T. Cordell, On Low-Velocity Impact Testing of Composite Materials, Journal of Composite Materials, vol.563, issue.10, pp.30-52, 1988.
DOI : 10.1016/0266-3538(85)90031-4

L. Adam, C. Bouvet, B. Castanié, A. Daidié, and E. Bonhomme, Discrete ply model of circular pull-through test of fasteners in laminates, Composite Structures, vol.94, issue.10, pp.3082-3091, 2012.
DOI : 10.1016/j.compstruct.2012.05.008

URL : https://hal.archives-ouvertes.fr/hal-00759881