D. Ahn, J. H. Kweon, S. Kwon, J. Song, and S. Lee, Representation of surface roughness in fused deposition modeling, Journal of Materials Processing Technology, vol.209, issue.15-16, pp.15-16, 2009.
DOI : 10.1016/j.jmatprotec.2009.05.016

M. Bartscher, U. Hilpert, J. Goebbels, and G. Weidemann, Enhancement and proof of accuracy of industrial computed tomography (CT) measurements, CIRP Annals -Manufacturing Technology, p.498, 2007.

C. Beyer and D. Figueroa, Design and Analysis of Lattice Structures for Additive Manufacturing, Journal of Manufacturing Science and Engineering, vol.138, issue.12, p.121014, 2016.
DOI : 10.1115/1.4033957

C. A. Brown, W. A. Johnsen, and K. M. Hult, Scale-sensitivity, fractal analysis and simulations, International Journal of Machine Tools and Manufacture, vol.38, issue.5-6, pp.5-6, 1998.
DOI : 10.1016/S0890-6955(97)00111-9

S. Carmignato, Accuracy of industrial computed tomography measurements: Experimental results from an international comparison, CIRP Annals -Manufacturing Technology, p.494, 2012.

L. De-chiffre, S. Carmignato, J. P. Kruth, R. Schmitt, and A. Weckenmann, Industrial applications of computed tomography, CIRP Annals, vol.63, issue.2, p.677, 2014.
DOI : 10.1016/j.cirp.2014.05.011

W. Dewulf, K. Kiekens, Y. Tan, F. Welkenhuyzen, and J. P. Kruth, Uncertainty determination and quantification for dimensional measurements with industrial computed tomography, CIRP Annals, vol.62, issue.1, p.538, 2013.
DOI : 10.1016/j.cirp.2013.03.017

L. Galantucci, F. Lavecchia, and G. Percoco, Experimental study aiming to enhance the surface finish of fused deposition modeled parts, CIRP Annals -Manufacturing Technology, p.192, 2099.

A. Hussein, L. Hao, C. Yan, R. Everson, and P. Young, Advanced lattice support structures for metal additive manufacturing, Journal of Materials Processing Technology, vol.213, issue.7, p.1026, 2013.
DOI : 10.1016/j.jmatprotec.2013.01.020

S. Jamiolahmadi and A. Barari, Surface Topography of Additive Manufacturing Parts Using a Finite Difference Approach, Journal of Manufacturing Science and Engineering, vol.136, issue.6, p.18, 2014.
DOI : 10.1115/1.4028585

R. Jimnez, C. Comps, and J. Yage, An Optimized Segmentation Algorithm for the Surface Extraction in Computed Tomography for Metrology Applications, Procedia Engineering 132, p.810, 2015.
DOI : 10.1016/j.proeng.2015.12.563

J. Kruth, M. Bartscher, S. Carmignato, R. Schmitt, L. D. Chiffre et al., Computed tomography for dimensional metrology, CIRP Annals, vol.60, issue.2, p.842, 2011.
DOI : 10.1016/j.cirp.2011.05.006
URL : http://orbit.dtu.dk/en/publications/computed-tomography-for-dimensional-metrology(80c3842c-df16-4886-a1f7-152261f87b72).html

J. J. Lifton, A. A. Malcolm, and J. W. Mcbride, On the uncertainty of surface determination in x-ray computed tomography for dimensional metrology, Measurement Science and Technology, vol.26, issue.3, p.35003, 2015.
DOI : 10.1088/0957-0233/26/3/035003

C. Mehdi-souzani, Y. Quinsat, C. Lartigue, and P. Bourdet, A knowledge database of qualified digitizing systems for the selection of the best system according to the application, CIRP Journal of Manufacturing Science and Technology, vol.13, pp.15-23, 2016.
DOI : 10.1016/j.cirpj.2015.12.002
URL : https://hal.archives-ouvertes.fr/hal-01255312

S. Ontiveros, J. Yage, R. Jimnez, and F. Brosed, Computer Tomography 3D Edge Detection Comparative for Metrology Applications, Procedia Engineering 63, p.719, 2013.
DOI : 10.1016/j.proeng.2013.08.263
URL : https://doi.org/10.1016/j.proeng.2013.08.263

N. Otsu, A Threshold Selection Method from Gray-Level Histograms, IEEE Transactions on Systems, Man, and Cybernetics, vol.9, issue.1, p.6266, 1979.
DOI : 10.1109/TSMC.1979.4310076

P. M. Pandey, N. V. Reddy, and S. G. Dhande, Improvement of surface finish by staircase machining in fused deposition modeling, Journal of Materials Processing Technology, vol.132, issue.1-3, pp.1-3, 2003.
DOI : 10.1016/S0924-0136(02)00953-6

Y. Pupo, K. P. Monroy, and J. Ciurana, Influence of process parameters on surface quality of CoCrMo produced by selective laser melting , The International Journal of Advanced Manufacturing Technology, pp.5-8, 2015.

D. Rosen, S. Johnston, M. Reed, and H. Wang, Design of general lattice structures for lightweight and compliance applications, Rapid Manufacturing Conference, 2006.

H. Shahabi and M. Ratnam, Simulation and measurement of surface roughness via grey scale image of tool in finish turning, Precision Engineering, p.153, 2016.

M. K. Thompson, G. Moroni, T. Vaneker, G. Fadel, R. I. Campbell et al., Design for Additive Manufacturing: Trends, opportunities, considerations , and constraints, CIRP Annals -Manufacturing Technology 65, p.737760, 2016.
DOI : 10.1016/j.cirp.2016.05.004
URL : http://orbit.dtu.dk/en/publications/design-for-additive-manufacturing-trends-opportunities-considerations-and-constraints(f05a7b7c-3a6e-486b-a407-53df5af62afa).html

A. Townsend, L. Pagani, P. Scott, and L. Blunt, Areal surface texture data extraction from X-ray computed tomography reconstructions of metal additively manufactured parts, Precision Engineering, pp.254-264, 2017.

M. Vulliez, M. Gleason, A. Souto-lebel, Y. Quinsat, C. Lartigue et al., Multi-scale Curvature Analysis and Correlations with the Fatigue Limit on Steel Surfaces after Milling, Procedia CIRP 13, p.313, 2014.
DOI : 10.1016/j.procir.2014.04.052
URL : https://hal.archives-ouvertes.fr/hal-01010455

J. Wang, R. K. Leach, and X. Jiang, Review of the mathematical foundations of data fusion techniques in surface metrology, Surface Topography: Metrology and Properties, p.23001, 2015.

J. Yage-fabra, S. Ontiveros, R. Jimnez, S. Chitchian, G. Tosello et al., A 3D edge detection technique for surface extraction in computed tomography for dimensional metrology applications, CIRP Annals, vol.62, issue.1, p.534, 2013.
DOI : 10.1016/j.cirp.2013.03.016

C. Yan, L. Hao, A. Hussein, and D. Raymont, Evaluations of cellular lattice structures manufactured using selective laser melting, International Journal of Machine Tools and Manufacture, vol.62, p.3238, 2012.
DOI : 10.1016/j.ijmachtools.2012.06.002

Y. Zeng, K. Wang, B. Wang, and C. Brown, Multi-scale evaluations of the roughness of surfaces made by additive manufacturing, 2014.