Characterization of char and soot from millimetric wood particles pyrolysis in a drop tube reactor between 800 degrees C and 1400 degrees C

Abstract : Char and soot characterization was performed for samples obtained from beech particles pyrolysis in a drop tube reactor at various temperatures and residence times. Firstly, an experimental study was performed and highlights the variation of char and soot composition and reactivity with operating conditions. A structure ordering with temperature for soot samples was also experimentally put into evidence. These variations are believed to be consequence of structural changes during char thermal annealing and soot formation process, affecting both carbonaceous matrix and mineral matter. Secondly, a semi-empirical model was developed and validated with thermogravimetry experiments. This model was then used for conversion time estimation in conditions representative of an entrained flow reactor, and shows that a complete conversion of char and soot is possible in a few seconds under severe operating conditions.
Liste complète des métadonnées

Littérature citée [29 références]  Voir  Masquer  Télécharger

https://hal.archives-ouvertes.fr/hal-01611616
Contributeur : Mines Albi Ecole Nationale Supérieure Des Mines d'Albi-Carmaux <>
Soumis le : lundi 12 mars 2018 - 14:53:48
Dernière modification le : jeudi 31 mai 2018 - 14:48:02
Document(s) archivé(s) le : mercredi 13 juin 2018 - 14:09:24

Fichier

characterization-char-soot1.pd...
Fichiers produits par l'(les) auteur(s)

Identifiants

Collections

Citation

S. Septien, S. Valin, M. Peyrot, Celine Dupont, Sylvain Salvador. Characterization of char and soot from millimetric wood particles pyrolysis in a drop tube reactor between 800 degrees C and 1400 degrees C. Fuel, Elsevier, 2014, 121, pp.216-224. 〈http://www.sciencedirect.com/science/article/pii/S0016236113011630〉. 〈10.1016/j.fuel.2013.12.026〉. 〈hal-01611616〉

Partager

Métriques

Consultations de la notice

78

Téléchargements de fichiers

30