R. Boyer, G. Welsch, and E. W. Collings, Materials properties handbook, titanium alloys, pp.483-636, 1994.

R. S. Mishra, V. V. Stolyarov, C. Echer, R. Z. Valiev, and A. K. Mukherjee, Mechanical behavior and superplasticity of a severe plastic deformation processed nanocrystalline Ti-6Al-4V alloy, Mater Sci Eng, vol.298, pp.44-50, 2001.

Y. G. Ko, W. G. Kim, C. S. Lee, and D. H. Shin, Microstructural influence on lowtemperature superplasticity of ultrafine-grained Ti-6Al-4V alloy, Mater Sci Eng, pp.156-165, 2005.

A. V. Sergueeva, V. V. Stolyarov, R. Z. Valiev, and A. K. Mukherjee, Enhanced superplasticity in a Ti-6Al-4V alloy processed by severe plastic deformation, Scripta Mater, vol.43, pp.819-843, 2000.

K. Mallikarjun, S. Suwas, and S. Bhargava, Effect of prior b processing on superplasticity of (a+b) thermo-mechanically treated Ti-632Si alloy, J Mater Process Technol, vol.134, pp.35-44, 2003.

S. Roy and S. Suwas, Deformation mechanisms during superplastic testing of Ti6Al-4V-0.1B alloy, Mater Sci Eng, vol.574, pp.205-222, 2013.

S. Roy and S. Suwas, Enhanced superplasticity for (a+b)-hot rolled Ti-6Al-4V-0.1B alloy by means of dynamic globularization, Mater Des, vol.58, pp.52-64, 2014.

H. Matsumoto, K. Yoshida, S. H. Lee, Y. Ono, and A. Chiba, Ti-6Al-4V alloy with an ultrafine-grained microstructure exhibiting low-temperature-high-strain-rate superplasticity, Mater Lett, vol.98, pp.209-221, 2013.

H. Matsumoto, S. H. Lee, Y. Ono, Y. Li, and A. Chiba, Formation of ultrafine-grained microstructure of Ti-6Al-4V alloy by hot deformation of a 0 martensite starting microstructure, Adv Eng Mater, vol.13, pp.470-474, 2011.

H. Matsumoto, L. Bin, S. H. Lee, Y. Li, Y. Ono et al., Frequent occurrence of discontinuous dynamic recrystallization in Ti-6Al-4V alloy with a 0 starting microstructure, Metall Mater Trans A, vol.44, pp.3245-60, 2013.

M. F. Ashby, The deformation of plastically non-homogeneous materials, Philos Mag, vol.21, pp.399-424, 1970.

M. Calcagnotto, D. Ponge, E. Demir, and D. Raabe, Orientation gradients and geometrically necessary dislocations in ultrafine grained dual-phase steels studied by 2D and 3D EBSD, Mater Sci Eng, vol.527, pp.2738-2784, 2010.

L. P. Kubin and A. Mortensen, Geometrically necessary dislocations and straingradient plasticity: a few critical issues, Scripta Mater, vol.48, pp.119-144, 2003.

R. C. Gifkins, Superplastic forming of structural alloys, pp.3-26, 1982.

A. Ball and M. M. Hutchison, Superplasticity in the aluminium-zinc eutectoid, Metal Sci, vol.3, pp.1-7, 1969.

O. A. Kaibyshev, A. I. Pshenichniuk, and V. V. Astanin, Superplasticity resulting from cooperative grain boundary sliding, Acta Mater, vol.46, pp.4911-4917, 1998.

S. L. Semiatin and G. A. Sargent, Constitutive modeling of low-temperature superplastic flow of ultrafine Ti-6Al-4V sheet material, Key Eng Mater, vol.433, pp.235-275, 2010.

J. S. Kim, J. H. Kim, Y. T. Lee, C. G. Park, and C. S. Lee, Microstructural analysis on boundary sliding and its accommodation mode during superplastic deformation of Ti6Al-4V alloy, Mater Sci Eng, vol.263, pp.272-80, 1999.

J. E. Bird, A. K. Mukherjee, and J. E. Dorn, Quantitative relation between microstructure and properties, p.225, 1969.

C. H. Park, B. Lee, S. L. Semiatin, and C. S. Lee, Low-temperature superplasticity and coarsening behavior of Ti-6Al-2Sn-4Zr-2Mo-0.1Si, Mater Sci Eng, vol.527, pp.5203-5214, 2010.

J. W. Martin, R. D. Doherty, and B. Cantor, Stability of microstructure in metallic system, 1997.
DOI : 10.1017/cbo9780511623134

G. A. Sargent, A. P. Zane, P. N. Fagin, A. K. Ghosh, and S. L. Semiatin, Low-temperature coarsening and plastic flow behavior of an alpha/beta titanium billet material with an ultrafine microstructure, Metall Mater Trans, vol.39, pp.2949-64, 2008.
DOI : 10.1007/s11661-008-9695-y
URL : https://link.springer.com/content/pdf/10.1007%2Fs11661-008-9695-y.pdf

S. L. Semiatin, P. N. Fagin, J. F. Betten, A. P. Zane, A. K. Ghosh et al., Plastic flow and microstructure evolution during low-temperature superplasticity of ultrafine Ti-6Al-4V sheet material, Metall Mater Trans, vol.41, pp.499-512, 2010.
DOI : 10.1007/s11661-009-0131-8