P. Schutzenberger, A. Colson, and C. R. Silicon, Hebd. Seances Acad. Sci, vol.93, pp.1508-1511, 1885.

O. Glemser, K. Beltz, and P. Naumann, Zur Kenntnis des Systems Silicium-Stickstoff, vol.291, pp.51-66, 1956.

B. J. Aylett, G. M. Burnett, L. K. Peterson, and N. Ross, Thermal degradation of polymers, SCI Monogr, vol.13, pp.5-11, 1961.

E. Kroke, Y. L. Li, C. Konotschny, E. Lecomte, C. Fasel et al., Silazane derived ceramics and related materials, Mater. Sci. Eng, vol.26, pp.97-199, 2000.

D. Seyferth and G. H. Wiseman, High-yield synthesis of Si3N4/SiC ceramic materials by pyrolysis of a novel polyorganosilazane, Commun. Am. Ceram. Soc, vol.27, issue.7, pp.132-133, 1984.

Y. Blum and R. M. Laine, Catalytic methods for the synthesis of oligosilazanes, Organometallics, vol.5, pp.2081-2086, 1986.

R. M. Laine, Transition metal catalysed synthesis of oligo-and poly-silazanes, Platin. Met. Rev, vol.32, issue.2, pp.64-71, 1988.

J. M. Schwark, Isocyanate-modified polysilazane ceramic precursors, Polym. Prep, vol.32, pp.567-568, 1991.

J. M. Schwark and M. J. Sullivan, Isocyanate-modified polysilazanes: conversion to ceramic materials, Mater. Res. Soc. Proc, vol.271, pp.807-812, 1992.

D. Seyferth, C. Strohmann, N. R. Dando, and A. J. Perrotta, Poly(ureidosilazanes): Preceramic Polymeric Precursors for Silicon Carbnitride and Silicon Nitride. Synthesis, Characterization and Pyrolytic Conversion to Si3N4/SiC Ceramics, Chem. Mater, vol.7, pp.2058-2066, 1995.

F. Aldinger, M. Weinmann, and J. Bill, Precursor-derived Si-B-C-N ceramics, Pure Appl. Chem, vol.70, pp.439-448, 1998.

Y. L. Li, E. Kroke, R. Riedel, C. Fasel, C. Gervais et al., Thermal cross-linking and pyrolytic conversion of poly(ureamethylvinyl)silazanes to silicon-based ceramics, Appl. Organomet. Chem, vol.15, pp.820-832, 2001.

S. Reschke, C. Haluschka, R. Riedel, Z. Lences, and D. Galusek, In situ generated homogeneous and functionally graded ceramic materials derived from polysilazane, J. Eur. Ceram. Soc, vol.23, pp.1963-1970, 2003.

E. Klatt, A. Frass, M. Friess, D. Koch, and H. Voggenreiter, Mechanical and microstructural characterisation of SiC-and SiBNC-fibre reinforced CMCs manufactured via PIP method before and after exposure to air, J. Eur. Ceram. Soc, vol.32, pp.3861-3874, 2012.
DOI : 10.1016/j.jeurceramsoc.2012.05.028

C. P. Gmbh, Technical Information: Ceraset Ò PSZ 20, 2011.

, Technical Bulletin 1, KiON Ceraset polyureasilazane and KiON ceraset polysilazane 20 heat-curable resins of KiON Corporation

L. A. Liew, Y. Liu, R. Luo, T. Cross, L. An et al., Fabrication of SiCN MEMS by photopolymerization of pre-ceramic polymers, Sens. Acttuators A Phys. Artic, vol.95, pp.143-151, 2002.

M. Schulz, M. Borner, J. Gottert, T. Hanemann, J. Hausselt et al., Cross linking behaviour of preceramic polymers effected by UV-and synchrotron radiation, Adv. Eng. Mater, vol.6, pp.676-680, 2004.

A. Kojima, S. Hoshii, and T. Muto, Characteristics of polysilazane compound and its application as coating for carbon materials, J. Mater. Sci. Lett, vol.21, issue.10, pp.757-760, 2002.

C. Vakifahmetoglu, I. Menapace, A. Hirsch, L. Biasetto, R. Hauser et al., Highly porous macro-and micro-cellular ceramics from a polysilazane precursor, Ceram. Int, vol.35, pp.3281-3290, 2009.

S. A. Abarca, O. Flores, A. L. Prette, G. S. Barroso, T. Coan et al., Synthesis and thermal characterization of silicon-based hybrid polymer, Chem. Eng. Trans, vol.32, pp.1621-1626, 2013.

T. Konegger, R. Patidar, and R. Bordia, A novel processing approach for free-standing porous non-oxide ceramic supports from polycarbosilane and polysilazane precursors, J. Eur. Ceram. Soc, vol.35, issue.9, pp.2679-2683, 2015.

J. M. Schwark, Isocyanate-and isothiocyanate-modified polysilazane ceramic precursors, 1988.

J. M. Schwark, Thio)amide-modified silazane polymer composition containing a free radical generator, 1989.

J. M. Schwark, Peroxide-substituted polysilazanes, 1992.

A. Lavedrine, D. Bahloul, P. Goursat, N. Choong-kwet-yive, R. Corriu et al., Pyrolysis of polyvinylsilazane precursors to silicon carbonitride, J. Eur. Cearmic Soc, vol.8, issue.4, pp.221-227, 1991.

J. Bill, J. Seitz, G. Thurn, J. Dürr, J. Canel et al., Structure analysis and properties of Si-C-N ceramics derived from polysilazanes, Phys. Status Solidi, vol.166, p.269, 1998.

, Lanxide company, Technical Bulletin of CERASET Ò SN Inorganic Polymer, 1997.

M. F. Gonon, S. Hampshire, J. P. Disson, and G. Fantozzi, A polysilazane precursor for Si-C-N-O matrix composites, J. Eur. Ceram. Soc, vol.15, pp.683-688, 1995.

D. Harran and A. Laudouard, Caractérisation de la gélification d'une résine thermodurcissable par méthode rhéologique, Rheol. Acta, vol.24, pp.596-602, 1985.

A. T. Di-benedetto, Prediction of the glass transition temperature of polymers: a model based on the principle of corresponding states, J. Polym. Sci. Part B, vol.25, pp.1949-1969, 1987.

J. P. Pascault and R. J. Williams, Glass transition temperature versus conversion relationships for thermosetting polymers, J. Polym. Sci. Part B Polym. Phys, vol.28, pp.85-95, 1990.

M. J. Richardson and N. G. Savill, Derivation of accurate glass transition temperatures by differential scanning calorimetry, Polymer (Guildf), vol.16, issue.10, pp.753-757, 1975.

M. R. Kamal and S. Sourour, Kinetics and thermal characterization of thermoset cure, Polym. Eng. Sci, vol.13, issue.1, pp.59-64, 1973.

M. Ivankovic, L. Incarnato, J. M. Kenny, and L. Nicolais, Curing kinetics and chemo-rheology of epoxy/anhydride system, J. Appl. Polym. Sci, vol.90, pp.3012-3019, 2003.

F. X. Perrin, T. M. Nguyen, and J. L. Vernet, Chemico-diffusion kinetics and TTT cure diagrams of DGEBA-DGEBF/amine resins cured with phenol catalysts, Eur. Polym. J, vol.43, issue.12, pp.5107-5120, 2007.

N. Rabearison, C. Jochum, and J. C. Grandidier, A cure kinetics, diffusion controlled and temperature dependent, identification of the Araldite LY556 epoxy, J. Mater. Sci, vol.46, issue.3, pp.787-796, 2010.
URL : https://hal.archives-ouvertes.fr/hal-00593684

L. M. Lopez, A. B. Cosgrove, J. P. Hernandez-ortiz, and T. A. Osswald, Modeling the vulcanization reaction of silicone rubber, Polym. Eng. Sci, pp.675-683, 2007.

J. A. Nelder and R. Mead, A simplex method for function minimization, Comput. J, vol.7, issue.4, pp.308-313, 1965.
DOI : 10.1093/comjnl/7.4.308

J. C. Lagarias, J. A. Reeds, M. H. Wright, and P. E. Wright, Convergence properties of the nelder-mead simplex method in low dimensions, SIAM J. Optim, vol.9, issue.1, pp.112-147, 1998.

I. D. Somma, R. Marotta, R. Andreozzi, and V. Caprio, Dicumyl peroxide thermal decomposition in cumene: development of a kinetic model, Chem. Eng. Trans, vol.24, pp.73-78, 2011.

P. I. Karkanas and I. K. Partridge, Cure modeling and monitoring of epoxy/amine resin systems. II. Network formation and chemoviscosity modeling, J. Appl. Polym. Sci, vol.77, pp.2178-2188, 2000.

H. Winter, Can the gel point of a cross-linking polymer be detected by the G 0-G 00 crossover?, Polym Eng. Sci, vol.27, issue.22, pp.1698-1702, 1987.

R. Chavez, E. Ionescu, C. Balan, C. Fasel, and R. Riedel, Effect of ambient atmosphere on crosslinking of polysilazanes, J. Appl. Polym. Sci, vol.119, pp.794-802, 2011.

O. Flores, L. Heymann, and G. Motz, Rheological behaviour of tailored polysilazanes melts for the processing of SiCN ceramics: viscoelastic properties and thermal stability, Rheol. Acta, vol.54, pp.517-528, 2015.

J. R. Dormand and P. J. Price, A family of embedded Runge-Kutta formulae, J. Comput. Appl. Math, vol.6, issue.1, pp.19-26, 1980.