J. Munoa, X. Beudaert, Z. Dombovari, Y. Altintas, E. Budak et al., Chatter suppression techniques in metal cutting, CIRP Annals, vol.65, issue.2, pp.785-808, 2016.
DOI : 10.1016/j.cirp.2016.06.004

M. Zatarain, I. Bediaga, J. Munoa, and R. Lizarralde, Stability of milling processes with continuous spindle speed variation: Analysis in the frequency and time domains, and experimental correlation, CIRP Annals, vol.57, issue.1, pp.379-384, 2008.
DOI : 10.1016/j.cirp.2008.03.067

Z. Dombovari, Y. Altintas, and G. Stepan, The effect of serration on mechanics and stability of milling cutters, International Journal of Machine Tools and Manufacture, vol.50, issue.6, pp.511-520, 2010.
DOI : 10.1016/j.ijmachtools.2010.03.006

Z. Dombovari, J. Munoa, G. Stepan, A. Otto, S. Rauh et al., General Milling Stability Model for Cylindrical Tools Stability of milling with non-uniform pitch and variable helix Tools the frequency and time domains, and experimental correlation, Procedia CIRP The International Journal of Advanced Manufacturing Technology, vol.4, issue.899, pp.90-972613, 2012.

J. Slavicek, The Effect of Irregular Tooth Pitch on Stability of Milling, Proceedings of the 6th MTDR Conference, pp.15-22, 1965.

H. Opitz, E. Dregger, and H. Roese, Improvement of the Dynamic Stability of the Milling Process by Irregular Tooth Pitch, Proceedings of the 6th MTDR Conference, pp.213-227, 1966.

P. Vanherck, INCREASING MILLING MACHINE PRODUCTIVITY BY USE OF CUTTERS WITH NON-CONSTANT CUTTING-EDGE PITCH, Proceedings of the 6th MTDR Conference, pp.947-960, 1967.
DOI : 10.1016/B978-0-08-012629-6.50017-1

J. Tlusty, F. Ismail, and W. Zaton, Milling Cutters With Irregular Pitch, 1982.

J. Tlusty, F. Ismail, and W. Zaton, Use of Special Milling Cutters Against Chatter, NAMRC, vol.11, pp.408-415, 1983.

Y. Altintas, S. Engin, and E. Budak, Analytical Prediction of Chatter Stability and Design for Variable Pitch Cutters, IMECE Manufacturing Science and Engineering, vol.8, pp.141-148, 1998.

E. Budak, Improving Productivity and Part Quality in Milling of Titanium Based Impellers by Chatter Suppression and Force Control, CIRP Annals, vol.49, issue.1, pp.31-36, 2000.
DOI : 10.1016/S0007-8506(07)62890-X

E. Budak, An Analytical Design Method for Milling Cutters With Nonconstant Pitch to Increase Stability, Part I: Theory, Journal of Manufacturing Science and Engineering, vol.125, issue.1, pp.29-35, 2003.
DOI : 10.1115/1.1536655

E. Budak, An Analytical Design Method for Milling Cutters With Nonconstant Pitch to Increase Stability, Part 2: Application, Journal of Manufacturing Science and Engineering, vol.125, issue.1, pp.35-38, 2003.
DOI : 10.1115/1.1536656

N. Olgac and R. Sipahi, Dynamics and Stability of Variable-pitch Milling, Journal of Vibration and Control, vol.105, issue.8, pp.1031-1043, 2007.
DOI : 10.1115/1.3269061

N. Sims, B. Mann, and S. Huyanan, Analytical prediction of chatter stability for variable pitch and variable helix milling tools, Journal of Sound and Vibration, vol.317, issue.3-5, pp.3-5664, 2008.
DOI : 10.1016/j.jsv.2008.03.045

A. Yusoff and N. Sims, Optimisation of variable helix end millings tools by minimising self excited vibration, Journal of Physics: Conference Series, vol.181, issue.1, p.12026, 2008.
DOI : 10.1088/1742-6596/181/1/012026

A. Yusoff and N. Sims, Optimisation of variable helix tool geometry for regenerative chatter mitigation, International Journal of Machine Tools and Manufacture, vol.51, issue.2, pp.133-141, 2011.
DOI : 10.1016/j.ijmachtools.2010.10.004

V. Sellmeier and B. Denkena, Stable islands in the stability chart of milling processes due to unequal tooth pitch, International Journal of Machine Tools and Manufacture, vol.51, issue.2, pp.152-164, 2011.
DOI : 10.1016/j.ijmachtools.2010.09.007

G. Stepan, J. Munoa, T. Insperger, M. Surico, D. Bachrathy et al., Cylindrical milling tools: Comparative real case study for process stability, CIRP Annals, vol.63, issue.1, pp.385-388, 2014.
DOI : 10.1016/j.cirp.2014.03.137

M. Zatarain and Z. Dombovari, Stability analysis of milling with irregular pitch tools by the implicit subspace iteration method, International Journal of Dynamics and Control, vol.27, issue.6, pp.26-34, 2014.
DOI : 10.1016/j.euromechsol.2008.01.006

E. Budak and E. Ozturk, Dynamics and stability of parallel turning operations, CIRP Annals, vol.60, issue.1, pp.383-386, 2011.
DOI : 10.1016/j.cirp.2011.03.028

A. Iglesias, J. Munoa, J. Ciurana, Z. Dombovari, and G. Stepan, Analytical expressions for chatter analysis in milling operations with one dominant mode, Journal of Sound and Vibration, vol.375, pp.403-421, 2016.
DOI : 10.1016/j.jsv.2016.04.015

I. Mancisidor, M. Zatarain, J. Munoa, and Z. Dombovari, Fixed Boundaries Receptance Coupling Substructure Analysis for Tool Point Dynamics Prediction, Advanced Materials Research, vol.223, pp.622-631, 2011.
DOI : 10.4028/www.scientific.net/AMR.223.622

E. Budak and Y. Altintas, Analytical Prediction of Chatter Stability in Milling???Part I: General Formulation, Journal of Dynamic Systems, Measurement, and Control, vol.120, issue.1, pp.22-30, 1998.
DOI : 10.1115/1.2801317

S. Merdol and Y. Altintas, Multi Frequency Solution of Chatter Stability for Low Immersion Milling, Journal of Manufacturing Science and Engineering, vol.126, issue.3, pp.459-466, 2004.
DOI : 10.1115/1.1765139

J. Munoa, Z. Dombovari, I. Mancisidor, Y. Yang, and M. Zatarain, INTERACTION BETWEEN MULTIPLE MODES IN MILLING PROCESSES, Machining Science and Technology, vol.205, issue.4, pp.165-180, 2013.
DOI : 10.1016/S0007-8506(07)60436-3

D. Bachrathy and G. Stepan, Improved prediction of stability lobes with extended multi frequency solution, CIRP Annals, vol.62, issue.1, pp.411-414, 2013.
DOI : 10.1016/j.cirp.2013.03.085

T. Insperger and G. Stepan, Semi-discretization method for delayed systems, International Journal for Numerical Methods in Engineering, vol.33, issue.1, pp.503-518, 2002.
DOI : 10.1076/0042-3114(200001)33:1;1-5;FT049

Z. Dombovari, A. Iglesias, M. Zatarain, and T. Insperger, Prediction of multiple dominant chatter frequencies in milling processes, International Journal of Machine Tools and Manufacture, vol.51, issue.6, pp.457-464, 2011.
DOI : 10.1016/j.ijmachtools.2011.02.002