P. Bailly, F. Delvare, J. Vial, J. Hanus, M. Biessy et al., Dynamic behavior of an aggregate material at simultaneous high pressure and strain rate: SHPB triaxial tests, International Journal of Impact Engineering, vol.38, issue.2-3, pp.73-84, 2011.
DOI : 10.1016/j.ijimpeng.2010.10.005

URL : https://hal.archives-ouvertes.fr/hal-00757019

G. Ben-dor, A. Dubinsky, and T. Elperin, Localized interaction models with non-constant friction for rigid penetrating impactors, International Journal of Solids and Structures, vol.44, issue.7-8, pp.2593-2607, 2007.
DOI : 10.1016/j.ijsolstr.2006.08.009

URL : http://doi.org/10.1016/j.ijsolstr.2006.08.009

B. Bruska-azhdar, L. Stenberg, and . Kari, Determination of dynamic and sliding friction, and observation of stick-slip phenomenon on compacted polymer powders during high-velocity compaction, Polymer Testing, vol.25, issue.8, pp.1069-1080, 2006.
DOI : 10.1016/j.polymertesting.2006.07.009

N. Burlion, G. Pijaudier-cabot, and N. Dahan, Experimental analysis of compaction of concrete and mortar, International Journal for Numerical and Analytical Methods in Geomechanics, vol.183, issue.15, pp.1467-1486, 2001.
DOI : 10.1002/nag.178

URL : https://hal.archives-ouvertes.fr/hal-01006829

P. Dickson, G. Parker, L. Smilowitz, J. Zucker, and B. Asay, Frictional Heating and Ignition of Energetic Materials, AIP Conference Proceedings, pp.1057-1060, 2005.
DOI : 10.1063/1.2263504

B. Durand, F. Delvare, P. Bailly, and D. Picart, Caractérisation du comportement à l'interface entre un matériau agrégataire et un acier sous forte pression et à grande vitesse. 20 ième Congrès Français de Mécanique, 2011.

B. Durand, F. Delvare, and P. Bailly, Numerical solution of Cauchy problems in linear elasticity in axisymmetric situations, International Journal of Solids and Structures, vol.48, issue.21, pp.3041-3053, 2011.
DOI : 10.1016/j.ijsolstr.2011.06.017

URL : https://hal.archives-ouvertes.fr/hal-00614464

J. Field, G. Swallowe, and S. Heaven, Ignition Mechanisms of Explosives during Mechanical Deformation, Proceedings of the Royal Society A: Mathematical, Physical and Engineering Sciences, vol.382, issue.1782, pp.231-275, 1982.
DOI : 10.1098/rspa.1982.0099

P. Forquin, A. Arias, and R. Zaera, An experimental method of measuring the confined compression strength of geomaterials, International Journal of Solids and Structures, vol.44, issue.13, pp.4291-4317, 2007.
DOI : 10.1016/j.ijsolstr.2006.11.022

P. Forquin, K. Safa, and G. Gary, Influence of free water on the quasi-static and dynamic strength of concrete in confined compression tests, Cement and Concrete Research, vol.40, issue.2, pp.321-333, 2009.
DOI : 10.1016/j.cemconres.2009.09.024

URL : https://hal.archives-ouvertes.fr/hal-00425466

R. Hartley, T. Cloete, and G. Nurick, An experimental assessment of friction effects in the split Hopkinson pressure bar using the ring compression test, International Journal of Impact Engineering, vol.34, issue.10, pp.1705-1728, 2007.
DOI : 10.1016/j.ijimpeng.2006.09.003

. Hoffman and J. Chandler, Aspects of the Tribology of the Plastic Bonded Explosive LX-04, Propellants, Explosives, Pyrotechnics, vol.9, issue.6
DOI : 10.1002/prep.200400068

H. Huang and R. Feng, Dynamic tribological response of SiC fracture surfaces, Mechanics of Materials, vol.38, issue.3, pp.186-202, 2006.
DOI : 10.1016/j.mechmat.2005.06.009

H. Huang and R. Feng, Dynamic Friction of SiC Surfaces: A Torsional Kolsky Bar Tribometer Study. Tribology Letters, pp.329-338, 2007.

Q. Li, Y. Lu, and H. Meng, Further investigation on the dynamic compressive strength enhancement of concrete-like materials based on split Hopkinson pressure bar tests
URL : https://hal.archives-ouvertes.fr/hal-00618189

S. Philippon, G. Sutter, and A. Molinari, An experimental study of friction at high sliding velocities, Wear, vol.257, issue.7-8, pp.777-787, 2004.
DOI : 10.1016/j.wear.2004.03.017

D. Picart, F. Delmaire-sizes, C. Gruau, and H. Trumel, IGNITION OF HMX-BASED PBX SUBMITTED TO IMPACT: STRAIN LOCALIZATION AND BOUNDARY CONDITIONS, 16 th Conference of the American Physical Society Topical Group on Shock Compression of Condensed Matter, 2009.
DOI : 10.1063/1.3295161

D. Picart and E. Bouton, Non-shock ignition of a HMX-based high explosive: thermomechanical numerical study, 14 th Int Detonation Symp, Coeur d'Alène (USA), pp.11-16, 2010.

S. Rajagopalan, M. Irfan, and V. Prakash, Novel experimental techniques for investigating time resolved high speed friction, Wear, vol.225, issue.229, pp.225-229, 1999.
DOI : 10.1016/S0043-1648(99)00071-X

S. Rajagopalan and V. Prakash, An experimental method to study high speed sliding characteristics during forward and reverse slip, Wear, vol.249, issue.8, pp.687-701, 2001.
DOI : 10.1016/S0043-1648(01)00697-4

S. Walley, P. Church, M. Furth, and J. Field, A High-Speed Photographic Study of the Rapid Deformation of Metal Annuli : Comparison of Theory with Experiment, Le Journal de Physique IV, vol.07, issue.C3
DOI : 10.1051/jp4:1997356

URL : https://hal.archives-ouvertes.fr/jpa-00255513

D. Wiegand, B. Redingius, K. Ellis, and C. Leppard, Pressure and friction dependent mechanical strength ??? cracks and plastic flow, International Journal of Solids and Structures, vol.48, issue.11-12, pp.1617-1629, 2011.
DOI : 10.1016/j.ijsolstr.2011.01.025

URL : http://doi.org/10.1016/j.ijsolstr.2011.01.025

:. Tien, P. Wu, W. Huang, M. Kuo, and C. Chu, Wall friction measurement and compaction characteristics of bentonite powders, Powder Technology, vol.173, issue.2, pp.140-151, 2007.
DOI : 10.1016/j.powtec.2006.11.023