A. Loureiro, L. Da-silva, C. Sato, and M. Figueiredo, Comparison of the Mechanical Behaviour Between Stiff and Flexible Adhesive Joints for the Automotive Industry, The Journal of Adhesion, vol.66, issue.7, pp.765-87, 2010.
DOI : 10.1163/156856108X309585

L. Valarinho, J. Correia, and F. Branco, Experimental study on the flexural behaviour of multi-span transparent glass???GFRP composite beams, Construction and Building Materials, vol.49, pp.1041-53, 2013.
DOI : 10.1016/j.conbuildmat.2012.11.024

B. Golaz, V. Michaud, S. Lavanchy, and J. Månson, Design and durability of titanium adhesive joints for marine applications, International Journal of Adhesion and Adhesives, vol.45, pp.150-157, 2013.
DOI : 10.1016/j.ijadhadh.2013.04.003

U. Vietri, L. Guadagno, M. Raimondo, L. Vertuccio, and K. Lafdi, Nanofilled epoxy adhesive for structural aeronautic materials, Composites Part B: Engineering, vol.61, pp.73-83, 2014.
DOI : 10.1016/j.compositesb.2014.01.032

Y. Li, J. Krahn, and C. Menon, Bioinspired Dry Adhesive Materials and Their Application in Robotics: A Review, Journal of Bionic Engineering, vol.13, issue.2, pp.181-99, 2016.
DOI : 10.1016/S1672-6529(16)60293-7

C. Hoang-toc and E. Paroissien, Simulation of single-lap bonded and hybrid (bolted/bonded) joints with flexible adhesive, International Journal of Adhesion and Adhesives, vol.30, issue.3, pp.117-146, 2010.
DOI : 10.1016/j.ijadhadh.2009.12.002

A. Sekulic and A. Curnier, Experimentation on adhesion of epoxy, International Journal of Adhesion and Adhesives, vol.30, issue.2, pp.89-104, 2010.
DOI : 10.1016/j.ijadhadh.2009.08.005

B. Salem, N. Budzik, M. Jumel, J. Shanahan, M. Lavelle et al., Investigation of the crack front process zone in the Double Cantilever Beam test with backface strain monitoring technique, Engineering Fracture Mechanics, vol.98, pp.272-83, 2013.
DOI : 10.1016/j.engfracmech.2012.09.028

H. Jin, G. Miller, A. Griffin, D. Stradley, D. Roach et al., Fracture behavior of a self-healing, toughened epoxy adhesive, International Journal of Adhesion and Adhesives, vol.44, pp.157-65, 2013.
DOI : 10.1016/j.ijadhadh.2013.02.015

M. Lee, C. Wang, and E. Yeo, Effects of adherend thickness and taper on adhesive bond strength measured by portable pull-off tests, International Journal of Adhesion and Adhesives, vol.44, pp.259-68, 2013.
DOI : 10.1016/j.ijadhadh.2013.03.014

G. Hu, Mixed mode fracture analysis of adhesive lap joints, Composites Engineering, vol.5, issue.8, pp.1043-50, 1995.
DOI : 10.1016/0961-9526(95)00026-J

L. Da-silva, T. Rodrigues, M. Figueiredo, M. De-moura, and J. Chousal, Effect of Adhesive Type and Thickness on the Lap Shear Strength, The Journal of Adhesion, vol.10, issue.11, pp.1091-115, 2006.
DOI : 10.1016/j.ijadhadh.2003.08.002

P. Weibgraeber and W. Becker, Finite Fracture Mechanics model for mixed mode fracture in adhesive joints, Int J Solids Struct, vol.50, pp.14-152383, 2013.

M. Arcan, Z. Ashin, and A. Voloshin, A method to produce uniform plane-stress states with applications to fiber-reinforced materials, Experimental Mechanics, vol.31, issue.5, pp.141-147, 1978.
DOI : 10.1007/BF02324146

G. Bresson, J. Jumel, M. Shanahan, and P. Serin, Strength of adhesively bonded joints under mixed axial and shear loading, International Journal of Adhesion and Adhesives, vol.35, pp.27-35, 2012.
DOI : 10.1016/j.ijadhadh.2011.12.006

R. Créac-'hcadec, J. Cognard, G. Jamin, and P. Jousset, Experimental analysis of the mechanical behaviour of a thick flexible adhesive under tensile/compression-shear loads, International Journal of Adhesion and Adhesives, vol.48, pp.258-67, 2014.
DOI : 10.1016/j.ijadhadh.2013.09.040

J. Bouchet, A. Roche, and J. E. , Determination of residual stresses in coated metallic substrates, Journal of Adhesion Science and Technology, vol.12, issue.3, pp.321-364, 2001.
DOI : 10.1163/156856194X00366

A. Roche, A. Behme, and J. Solomon, A three-point flexure test configuration for improved sensitivity to metal/ adhesive interfacial phenomena, International Journal of Adhesion and Adhesives, vol.2, issue.4, pp.249-54, 1982.
DOI : 10.1016/0143-7496(82)90032-X

H. Oh, J. Lee, H. Ahn, Y. Jeong, N. Park et al., Etching characteristics of high-purity aluminum in hydrochloric acid solutions, Materials Science and Engineering: A, vol.449, issue.451, pp.449-451348, 2007.
DOI : 10.1016/j.msea.2006.01.159

J. Aakkula and O. Saarela, Silane based field level surface treatment methods for aluminium, titanium and steel bonding, International Journal of Adhesion and Adhesives, vol.48, pp.268-79, 2014.
DOI : 10.1016/j.ijadhadh.2013.09.039

B. Ramezanzadeh, E. Raeisi, and M. Mahdavian, Studying various mixtures of 3-aminopropyltriethoxysilane (APS) and tetraethylorthosilicate (TEOS) silanes on the corrosion resistance of mild steel and adhesion properties of epoxy coating, International Journal of Adhesion and Adhesives, vol.63, pp.166-76, 2015.
DOI : 10.1016/j.ijadhadh.2015.09.007

S. Bentadjine, R. Petiaud, A. Roche, and V. Massardier, Organo-metallic complex characterization formed when liquid epoxy-diamine mixtures are applied onto metallic substrates, Polymer, vol.42, issue.14, pp.6271-82, 2001.
DOI : 10.1016/S0032-3861(01)00034-9

M. Aufray and A. Roche, Residual stresses and practical adhesion: effect of organo-metallic complex formation and crystallization, Journal of Adhesion Science and Technology, vol.2, issue.16, pp.1889-903, 2006.
DOI : 10.1163/156856194X00357

URL : https://hal.archives-ouvertes.fr/hal-00867466

A. Roche, P. Dole, and M. Bouzziri, Measurement of the practical adhesion of paint coatings to metallic sheets by the pull-off and three-point flexure tests, Journal of Adhesion Science and Technology, vol.7, issue.6, pp.587-609, 1994.
DOI : 10.1163/156856194X00366

J. Bouchet, A. Roche, and J. E. , The role of the polymer/metal interphase and its residual stresses in the critical strain energy release rate (Gc) determined using a three-point flexure test, Journal of Adhesion Science and Technology, vol.1, issue.3, pp.345-69, 2001.
DOI : 10.1163/156856194X00366