D. F. Rogers-]-t and . Barth, An Introduction to NURBS With Historical Perspective Simplified numerical methods for gas dynamics systems on triangulated domains, 1998.

M. Mcmullen, A. Jameson, and J. J. Alonso, Application of a non-linear frequency domain solver to the Euler and Navier?Stokes equations, 40th AIAA Aerospace Sciences Meeting and Exhibit, 2002.

M. Gee, W. A. Wall, and E. Ramm, Parallel multilevel solution of nonlinear shell structures, Computer Methods in Applied Mechanics and Engineering, vol.194, issue.21-24
DOI : 10.1016/j.cma.2004.07.043
URL : http://citeseerx.ist.psu.edu/viewdoc/summary?doi=10.1.1.210.9666

G. M. Stanley, Continuum-based shell elements, 1985.

T. J. Barth, Numerical Methods for Gasdynamic Systems on Unstructured Meshes, Lecture Notes in Computational Science and Engineering, vol.5, pp.195-285, 1998.
DOI : 10.1007/978-3-642-58535-7_5

B. Szabó, A. Dü-ster, and E. Rank, The p-version of the finite element method, Fundamentals, Encyclopedia of Computational Mechanics, 2004.

E. Rank, A. Dü-ster, V. Nü-bel, K. Preusch, and O. T. Bruhns, High order finite elements for shells, Computer Methods in Applied Mechanics and Engineering, vol.194, issue.21-24
DOI : 10.1016/j.cma.2004.07.042
URL : http://mediatum.ub.tum.de/doc/1192403/document.pdf

S. Abhyankar and C. Bajaj, Automatic parameretization of rational curves and surfaces 1: conics and conicoids, Computer-Aided Design, vol.19, issue.1, pp.11-14, 1987.
DOI : 10.1016/0010-4485(87)90147-3

S. Abhyankar and C. Bajaj, Automatic parametrization of rational curves and surfaces II: cubics and cubicoids, Computer-Aided Design, vol.19, issue.9, pp.499-502, 1987.
DOI : 10.1016/0010-4485(87)90235-1

S. Abhyankar and C. Bajaj, Automatic parameterization of rational curves and surfaces III: Algebraic plane curves, Computer Aided Geometric Design, vol.5, issue.4, pp.309-321, 1988.
DOI : 10.1016/0167-8396(88)90011-8
URL : http://citeseerx.ist.psu.edu/viewdoc/summary?doi=10.1.1.153.9619

C. Abhyankar and . Bajaj, Automatic parameterization of rational curves and surfaces IV: algebraic space curves, ACM Transactions on Graphics, vol.8, issue.4, pp.325-334, 1989.
DOI : 10.1145/77269.77273
URL : http://repository.ias.ac.in/70874/1/1-auth.pdf

C. Bajaj, J. Chen, R. Holt, and A. Netravali, Energy formulations of A-splines, Computer Aided Geometric Design, vol.16, issue.1, pp.39-59, 1999.
DOI : 10.1016/S0167-8396(98)00029-6

. B. Fig, Two h-refinements of the two-element mesh of Fig. 17a. (a) Elements split uniformly in the parametric space. (b) Elements split using the scheme described above

C. Bajaj, J. Chen, and G. Xu, Modeling with cubic A-patches, ACM Transactions on Graphics, vol.14, issue.2, pp.103-133, 1995.
DOI : 10.1145/221659.221662
URL : http://citeseerx.ist.psu.edu/viewdoc/summary?doi=10.1.1.154.2384

F. Cirak and M. Ortiz, Fully C1???conforming subdivision elements for finite deformation thin???shell analysis, International Journal for Numerical Methods in Engineering, vol.51, issue.7, pp.813-833, 2001.
DOI : 10.1002/nme.182.abs

F. Cirak, M. Ortiz, and P. , Subdivision surfaces: a new paradigm for thin-shell finite-element analysis, International Journal for Numerical Methods in Engineering, vol.18, issue.12, pp.2039-2072, 2000.
DOI : 10.1002/(SICI)1097-0207(20000430)47:12<2039::AID-NME872>3.0.CO;2-1
URL : http://citeseerx.ist.psu.edu/viewdoc/summary?doi=10.1.1.16.385

F. Cirak, M. J. Scott, E. K. Antonsson, M. Ortiz, and P. , Integrated modeling, finite-element analysis, and engineering design for thin-shell structures using subdivision, Computer-Aided Design, vol.34, issue.2, pp.137-148, 2002.
DOI : 10.1016/S0010-4485(01)00061-6
URL : http://citeseerx.ist.psu.edu/viewdoc/summary?doi=10.1.1.1029.2145

T. J. Hughes, The Finite Element Method: Linear Static and Dynamic Finite Element Analysis, 2000.

L. Piegl and W. Tiller, The NURBS Book (Monographs in Visual Communication, 1997.

P. Kagan, A. Fischer, and P. , Mechanically based models: Adaptive refinement for B-spline finite element, International Journal for Numerical Methods in Engineering, vol.14, issue.8, pp.1145-1175, 2003.
DOI : 10.1002/nme.717

J. Bonet, S. Kulasegaram, M. X. Rodriguez-paz, and M. Profit, Variational formulation for the smooth particle hydrodynamics (SPH) simulation of fluid and solid problems, Computer Methods in Applied Mechanics and Engineering, vol.193, issue.12-14, pp.193-1245, 2004.
DOI : 10.1016/j.cma.2003.12.018

P. Breitkopf, A. Rassineux, J. Savignat, and P. Villon, Integration constraint in diffuse element method, Computer Methods in Applied Mechanics and Engineering, vol.193, issue.12-14, pp.1203-1220, 2004.
DOI : 10.1016/j.cma.2003.12.014

J. S. Chen, W. Dongdong, and S. B. Dong, An extended meshfree method for boundary value problems, Computer Methods in Applied Mechanics and Engineering, vol.193, issue.12-14, pp.1085-1103, 2004.
DOI : 10.1016/j.cma.2003.12.007

J. S. Chen, V. Kotta, H. Lu, D. Wang, D. Moldovan et al., A variational formulation and a double-grid method for mesoscale modeling of stressed grain growth in polycrystalline materials, Comput. Methods Appl. Mech. Engrg, pp.193-1277, 2004.

W. Dongdong and J. S. Chen, Locking-free stabilized conforming nodal integration for meshfree Mindlin?Reissner plate formulation, Comput. Methods Appl. Mech. Engrg, vol.193, pp.1065-1083, 2004.

G. E. Fasshauer, Toward approximate moving least squares approximation with irregularly spaced centers, Computer Methods in Applied Mechanics and Engineering, vol.193, issue.12-14, pp.1231-1243, 2004.
DOI : 10.1016/j.cma.2003.12.017
URL : http://amadeus.csam.iit.edu/~fass/Lisbon05.pdf

S. Fernandez-mendez and A. Huerta, Imposing essential boundary conditions in mesh-free methods, Computer Methods in Applied Mechanics and Engineering, vol.193, issue.12-14, pp.1257-1275, 2004.
DOI : 10.1016/j.cma.2003.12.019

A. Huerta, S. Fernandez-mendez, and W. K. Liu, A comparison of two formulations to blend finite elements and mesh-free methods, Computer Methods in Applied Mechanics and Engineering, vol.193, issue.12-14, pp.193-1105, 2004.
DOI : 10.1016/j.cma.2003.12.009

A. Huerta, Y. Vidal, and P. Villon, Pseudo-divergence-free element free Galerkin method for incompressible fluid flow, Computer Methods in Applied Mechanics and Engineering, vol.193, issue.12-14, pp.1119-1136, 2004.
DOI : 10.1016/j.cma.2003.12.010
URL : http://upcommons.upc.edu/bitstream/2117/8507/3/2004-CMAME-HVV-blanc.pdf

G. Li and N. R. Aluru, Positivity conditions in meshless collocation methods, Comput. Methods Appl. Mech. Engrg, vol.193, pp.1171-1202, 2004.

S. Li, H. Lu, W. Han, W. K. Liu, and D. Simkins-jr, Reproducing kernel element method Part II: Globally conforming Im/Cn hierarchies, Computer Methods in Applied Mechanics and Engineering, vol.193, issue.12-14, pp.193-953, 2004.
DOI : 10.1016/j.cma.2003.12.002
URL : http://citeseerx.ist.psu.edu/viewdoc/summary?doi=10.1.1.178.8577

W. K. Liu, W. Han, H. Lu, S. Li, and J. Cao, Reproducing kernel element method. Part I: Theoretical formulation, Computer Methods in Applied Mechanics and Engineering, vol.193, issue.12-14, pp.193-933, 2004.
DOI : 10.1016/j.cma.2003.12.001

H. Lu, S. Li, D. Simkins-jr, W. K. Liu, and J. Cao, Reproducing kernel element method Part III: Generalized enrichment and applications, Computer Methods in Applied Mechanics and Engineering, vol.193, issue.12-14, pp.193-989, 2004.
DOI : 10.1016/j.cma.2003.12.003

T. Rabczuk, T. Belytschko, and S. P. Xiao, Stable particle methods based on Lagrangian kernels, Computer Methods in Applied Mechanics and Engineering, vol.193, issue.12-14, pp.1035-1063, 2004.
DOI : 10.1016/j.cma.2003.12.005

D. , S. Jr, S. Li, H. Lu, and W. K. Liu, Reproducing kernel element method. Part IV: globally compatible C n (n P 1) triangular hierarchy, Comput. Methods Appl. Mech. Engrg, pp.193-1013, 2004.

D. Sulsky and A. , Implicit dynamics in the material-point method, Computer Methods in Applied Mechanics and Engineering, vol.193, issue.12-14, pp.1137-1170, 2004.
DOI : 10.1016/j.cma.2003.12.011

X. Wang and W. K. Liu, Extended immersed boundary method using FEM and RKPM, Computer Methods in Applied Mechanics and Engineering, vol.193, issue.12-14, pp.1305-1321, 2004.
DOI : 10.1016/j.cma.2003.12.024

Z. Wu, Dynamically knots setting in meshless method for solving time dependent propagations equation, Computer Methods in Applied Mechanics and Engineering, vol.193, issue.12-14, pp.1221-1229, 2004.
DOI : 10.1016/j.cma.2003.12.015

P. L. Gould, Introduction to Linear Elasticity, 1999.
DOI : 10.1007/978-1-4614-4833-4

S. Timoshenko and S. Woinowsky-krieger, Theory of Plates and Shells (Engineering Societies Monograph), second ed, 1959.

M. Bischoff, W. A. Wall, K. U. Bletzinger, and E. Ramm, Models and Finite Elements for Thin-Walled Structures, Solids, Structures and Coupled Problems, Encyclopedia of Computational Mechanics, 2004.
DOI : 10.1002/0470091355.ecm026

C. Felippa, Course notes for advanced finite element methods

T. Belytschko, H. Stolarski, W. K. Liu, N. Carpenter, and J. S. Ong, Stress projection for membrane and shear locking in shell finite elements, Computer Methods in Applied Mechanics and Engineering, vol.51, issue.1-3, pp.51-221, 1985.
DOI : 10.1016/0045-7825(85)90035-0

C. Canuto, M. Y. Hussaini, A. Quarteroni, and T. A. Zang, Spectral Methods in Fluid Dynamics, 1988.
DOI : 10.1007/978-3-642-84108-8

P. Moin, Fundamentals of Engineering Numerical Analysis, 2001.
DOI : 10.1139/l02-006

T. J. Hughes and L. P. Franca, A mixed finite element formulation for Reissner-mindlin plate theory: Uniform convergence of all higher-order spaces, Computer Methods in Applied Mechanics and Engineering, vol.67, issue.2, pp.67-223, 1988.
DOI : 10.1016/0045-7825(88)90127-2

G. Engel, K. Garikipati, T. J. Hughes, M. G. Larson, and L. Mazzei, Continuous/discontinuous finite element approximations of fourth-order elliptic problems in structural and continuum mechanics with applications to thin beams and plates, and strain gradient elasticity, Computer Methods in Applied Mechanics and Engineering, vol.191, issue.34, pp.191-3669, 2002.
DOI : 10.1016/S0045-7825(02)00286-4

E. Oñ-ate and M. Cervera, DERIVATION OF THIN PLATE BENDING ELEMENTS WITH ONE DEGREE OF FREEDOM PER NODE: A SIMPLE THREE NODE TRIANGLE, Engineering Computations, vol.15, issue.6, pp.543-561, 1993.
DOI : 10.1007/BF00364252

E. Oñ-ate and F. Zarate, Rotation-free triangular plate and shell elements, International Journal for Numerical Methods in Engineering, vol.9, issue.1-3, pp.557-603, 2000.
DOI : 10.1002/(SICI)1097-0207(20000110/30)47:1/3<557::AID-NME784>3.0.CO;2-9

R. Phaal and C. R. Calladine, A simple class of finite elements for plate and shell problems. I: Elements for beams and thin flat plates, International Journal for Numerical Methods in Engineering, vol.15, issue.5, pp.955-977, 1992.
DOI : 10.1002/nme.1620350502

R. Phaal and C. R. Calladine, A simple class of finite elements for plate and shell problems. II: An element for thin shells, with only translational degrees of freedom, International Journal for Numerical Methods in Engineering, vol.6, issue.5, pp.979-996, 1992.
DOI : 10.1002/nme.1620350503

A. N. Brooks and T. J. Hughes, Streamline upwind/Petrov-Galerkin formulations for convection dominated flows with particular emphasis on the incompressible Navier-Stokes equations, Computer Methods in Applied Mechanics and Engineering, vol.32, issue.1-3, pp.32-199, 1982.
DOI : 10.1016/0045-7825(82)90071-8

J. E. Akin and T. E. Tezduyar, Calculation of the advective limit of the SUPG stabilization parameter for linear and higher-order elements, Computer Methods in Applied Mechanics and Engineering, vol.193, issue.21-22, pp.1909-1922, 2004.
DOI : 10.1016/j.cma.2003.12.050

M. Bischoff and K. Bletzinger, Improving stability and accuracy of Reissner???Mindlin plate finite elements via algebraic subgrid scale stabilization, Computer Methods in Applied Mechanics and Engineering, vol.193, issue.15-16, pp.1491-1516, 2004.
DOI : 10.1016/j.cma.2003.12.036
URL : http://mediatum.ub.tum.de/doc/1108918/document.pdf

P. B. Bochev, M. D. Gunzburger, and J. N. Shadid, On inf???sup stabilized finite element methods for transient problems, Computer Methods in Applied Mechanics and Engineering, vol.193, issue.15-16, pp.1471-1489, 2004.
DOI : 10.1016/j.cma.2003.12.034
URL : http://citeseerx.ist.psu.edu/viewdoc/summary?doi=10.1.1.407.91

E. Burman and P. Hansbo, Edge stabilization for Galerkin approximations of convection???diffusion???reaction problems, Computer Methods in Applied Mechanics and Engineering, vol.193, issue.15-16, pp.1437-1453, 2004.
DOI : 10.1016/j.cma.2003.12.032

R. Codina and O. Soto, Approximation of the incompressible Navier???Stokes equations using orthogonal subscale stabilization and pressure segregation on anisotropic finite element meshes, Computer Methods in Applied Mechanics and Engineering, vol.193, issue.15-16, pp.1403-1419, 2004.
DOI : 10.1016/j.cma.2003.12.030

A. L. Coutinho, C. M. Diaz, J. L. Alvez, L. Landau, A. F. Loula et al., Stabilized methods and post-processing techniques for miscible displacements, Computer Methods in Applied Mechanics and Engineering, vol.193, issue.15-16, pp.1421-1436, 2004.
DOI : 10.1016/j.cma.2003.12.031

V. Gravemeier, W. A. Wall, and E. Ramm, A three-level finite element method for the instationary incompressible Navier???Stokes equations, Computer Methods in Applied Mechanics and Engineering, vol.193, issue.15-16, pp.1323-1366, 2004.
DOI : 10.1016/j.cma.2003.12.027

I. Harari, Stability of semidiscrete formulations for parabolic problems at small time steps, Computer Methods in Applied Mechanics and Engineering, vol.193, issue.15-16, pp.1491-1516, 2004.
DOI : 10.1016/j.cma.2003.12.035

G. Hauke and L. , Computing reactive flows with a field Monte Carlo formulation and multi-scale methods, Computer Methods in Applied Mechanics and Engineering, vol.193, issue.15-16, pp.1455-1470, 2004.
DOI : 10.1016/j.cma.2003.12.033
URL : https://digital.csic.es/bitstream/10261/51170/1/accesoRestringido.pdf

B. Koobus and C. Farhat, A variational multiscale method for the large eddy simulation of compressible turbulent flows on unstructured meshes??????application to vortex shedding, Computer Methods in Applied Mechanics and Engineering, vol.193, issue.15-16, pp.1367-1383, 2004.
DOI : 10.1016/j.cma.2003.12.028
URL : https://hal.archives-ouvertes.fr/hal-00372839

A. Masud and R. A. Khurram, A multiscale/stabilized finite element method for the advection???diffusion equation, Computer Methods in Applied Mechanics and Engineering, vol.193, issue.21-22, pp.1997-2018, 2004.
DOI : 10.1016/j.cma.2003.12.047

T. E. Tezduyar and S. Sathe, Enhanced-discretization space???time technique (EDSTT), Computer Methods in Applied Mechanics and Engineering, vol.193, issue.15-16, pp.1385-1401, 2004.
DOI : 10.1016/j.cma.2003.12.029

F. L. Chalot, Industrial Aerodynamics, Computational Fluid Dynamics, Encyclopedia of Computational Mechanics, 2004.
DOI : 10.1002/0470091355.ecm065

C. Johnson, U. Nävert, and J. Pitkäranta, Finite element methods for linear hyperbolic problems, Computer Methods in Applied Mechanics and Engineering, vol.45, issue.1-3, pp.285-312, 1984.
DOI : 10.1016/0045-7825(84)90158-0

T. J. Hughes, G. Scovazzi, and L. P. Franca, Multiscale and stabilized methods, Computational Fluid Dynamics, Encyclopedia of Computational Mechanics, 2004.
DOI : 10.1002/9781119176817.ecm051
URL : http://www.dtic.mil/docs/citations/*FIBER REINFORCED COMPOSITES, *COMPOSITE STRUCTURES, FIBERGLASS, LAMINATES, http://www.dtic.mil/get-tr-doc/pdf?AD=, ADA439478 Colorad

T. J. Hughes, Multiscale phenomena: Green's functions, the Dirichlet-to-Neumann formulation, subgrid scale models, bubbles and the origins of stabilized methods, Computer Methods in Applied Mechanics and Engineering, vol.127, issue.1-4, pp.387-401, 1995.
DOI : 10.1016/0045-7825(95)00844-9

T. J. Hughes, G. Feijó-o, L. Mazzei, and J. B. Quincy, The variational multiscale method???a paradigm for computational mechanics, Computer Methods in Applied Mechanics and Engineering, vol.166, issue.1-2, pp.166-169, 1998.
DOI : 10.1016/S0045-7825(98)00079-6

L. B. Wahlbin, Local behavior in finite element methods Finite Element Methods (Part 1), Handbook of Numerical Analysis, pp.353-522, 1991.

H. Qin and D. , Triangular NURBS and their dynamic generalizations, Computer Aided Geometric Design, vol.14, issue.4, pp.325-347, 1996.
DOI : 10.1016/S0167-8396(96)00062-3
URL : http://citeseerx.ist.psu.edu/viewdoc/summary?doi=10.1.1.23.8969

A. G. Kravchenko, P. Moin, and R. Moser, Zonal Embedded Grids for Numerical Simulations of Wall-Bounded Turbulent Flows, Journal of Computational Physics, vol.127, issue.2, pp.412-423, 1996.
DOI : 10.1006/jcph.1996.0184

A. G. Kravchenko, P. Moin, and K. Shariff, B-spline method and zonal grids for simulations of complex turbulent flows, 35th Aerospace Sciences Meeting and Exhibit, pp.151-757, 1999.
DOI : 10.2514/6.1997-433

W. Y. Kwok, R. D. Moser, and J. Jiménez, A Critical Evaluation of the Resolution Properties of B-Spline and Compact Finite Difference Methods, Journal of Computational Physics, vol.174, issue.2, pp.510-551, 2001.
DOI : 10.1006/jcph.2001.6919

K. Shariff and R. D. Moser, Two-Dimensional Mesh Embedding for B-spline Methods, Journal of Computational Physics, vol.145, issue.2, pp.471-488, 1998.
DOI : 10.1006/jcph.1998.6053

T. A. Laursen, Computational Contact and Impact Mechanics, 2002.
DOI : 10.1007/978-3-662-04864-1

H. Qin and D. Terzopoulos, D-NURBS: a physics-based framework for geometric design, IEEE Trans. Visual. Comput. Graph, vol.2, pp.85-96, 1996.