J. Pedron and A. Pineau, The effect of microstructure and environment on the crack growth behaviour of Inconel 718 alloy at 650 ??C under fatigue, creep and combined loading, Materials Science and Engineering, vol.56, issue.2, pp.143-56, 1982.
DOI : 10.1016/0025-5416(82)90167-7

M. Clavel and A. Pineau, Frequency and wave-form effects on the fatigue crack growth behavior of alloy 718 at 298 K and 823 K, Metallurgical Transactions A, vol.8, issue.4, pp.471-80, 1978.
DOI : 10.1115/1.3443131

T. Nicholas and T. Weerasooriya, Hold-Time Effects in Elevated Temperature Fatigue Crack Propagation, 1986.
DOI : 10.1520/STP17394S

S. Lynch, T. Radtke, B. Wicks, and R. Byrnes, FATIGUE CRACK GROWTH IN NICKEL-BASED SUPERALLOYS AT 500-700??C. II: DIRECT-AGED ALLOY 718, Fatigue & Fracture of Engineering Materials & Structures, vol.2, issue.3, pp.313-338, 1994.
DOI : 10.1016/0921-5093(92)90107-C

M. Bache, W. Evans, and M. Hardy, The effects of environment and loading waveform on fatigue crack growth in Inconel 718, International Journal of Fatigue, vol.21, pp.69-77, 1999.
DOI : 10.1016/S0142-1123(99)00057-2

S. Pierret, R. Pinho, and A. Pineau, Hold Time Effects on the Crack Growth Behavior in Inco 718 Alloy, 8th International symposium on superalloy 718 and derivatives, pp.537-51, 2014.
DOI : 10.1179/174892306X99679
URL : https://hal.archives-ouvertes.fr/hal-01113531

D. Gustafsson, J. Moverare, S. Johansson, K. Simonsson, M. Hörnqvist et al., Influence of high temperature hold times on the fatigue crack propagation in Inconel 718, International Journal of Fatigue, vol.33, issue.11, pp.1461-1470, 2011.
DOI : 10.1016/j.ijfatigue.2011.05.011

K. Sadananda and P. Shahinian, Creep crack growth in alloy 718, Metallurgical Transactions A, vol.70, issue.144, pp.439-488, 1977.
DOI : 10.1115/1.3425090

K. Sadananda and P. Shahinian, The effect of environment on the creep crack growth behavior several structural alloys, Materials Science and Engineering, vol.43, issue.2, pp.159-68, 1980.
DOI : 10.1016/0025-5416(80)90143-3

C. Branco, J. Baptista, and J. Byrne, Crack growth under constant sustained load at elevated temperature in IN718 superalloy, Materials at High Temperatures, vol.12, issue.4, pp.27-35, 1999.
DOI : 10.1016/0020-7683(82)90071-3

E. Fessler, S. Pierret, E. Andrieu, and V. Bonnand, Crack growth threshold under hold time conditions in DA Inconel 718 ? a transition in the crack growth mechanism, Fract Struct Integr, vol.2015, pp.223-254

E. Andrieu, R. Molins, H. Ghonem, and A. Pineau, Intergranular crack tip oxidation mechanism in a nickel-based superalloy, Materials Science and Engineering: A, vol.154, issue.1, pp.21-29, 1992.
DOI : 10.1016/0921-5093(92)90358-8

S. Floreen and R. Kane, AN INVESTIGATION OF THE CREEP-FATIGUE-ENVIRONMENT INTERACTION IN A Ni-BASE SUPERALLOY, Fatigue & Fracture of Engineering Materials and Structures, vol.9, issue.4, pp.401-413, 1979.
DOI : 10.1016/0013-7944(77)90047-9

H. Ghonem, T. Nicholas, and A. Pineau, ELEVATED TEMPERATURE FATIGUE CRACK GROWTH IN ALLOY 718?PART II: EFFECTS OF ENVIRONMENTAL AND MATERIAL VARIABLES, Fatigue & Fracture of Engineering Materials and Structures, vol.12, issue.3, pp.577-90, 1993.
DOI : 10.1520/STP35900S

E. Andrieu, R. Cozar, and A. Pineau, Effect of environment and microstructure on the hight temperature behavior of alloy 718. Superalloys 718, 625 Various Derivatives, pp.241-56, 1989.

R. Molins, G. Hochstetter, J. Chassaigne, and E. Andrieu, Oxidation effects on the fatigue crack growth behaviour of alloy 718 at high temperature, Acta Materialia, vol.45, issue.2, pp.663-74, 1997.
DOI : 10.1016/S1359-6454(96)00192-9

H. Evans, H. Li, and P. Bowen, A mechanism for stress-aided grain boundary oxidation ahead of cracks, Scripta Materialia, vol.69, issue.2, pp.179-82, 2013.
DOI : 10.1016/j.scriptamat.2013.03.026

D. Woodford, Gas phase embrittlement and time dependent cracking of nickel based superalloys, Energy Materials, vol.4, issue.1, pp.59-79, 2006.
DOI : 10.1016/S0142-1123(03)00139-7

X. Liu, L. Ma, K. Chang, and E. Barbero, Fatigue crack propagation of ni-base superalloys, Acta Metall Sin (Engl Lett), vol.18, pp.55-64, 2009.

D. Gustafsson, J. Moverare, K. Simonsson, S. Johansson, M. Hörnqvist et al., Fatigue crack growth behaviour of Inconel 718 ??? the concept of a damaged zone caused by high temperature hold times, Procedia Engineering, vol.10, pp.2821-2827, 2011.
DOI : 10.1016/j.proeng.2011.04.469

J. Bouvard, F. Gallerneau, P. Paulmier, and J. Chaboche, A phenomenological model to predict the crack growth in single crystal superalloys at high temperature, International Journal of Fatigue, vol.38, pp.130-173, 2012.
DOI : 10.1016/j.ijfatigue.2011.12.011

D. Gustafsson, E. Lundström, and K. Simonsson, Modelling of high temperature fatigue crack growth in Inconel 718 under hold time conditions, International Journal of Fatigue, vol.52, pp.124-154, 2013.
DOI : 10.1016/j.ijfatigue.2013.03.004

E. Lundström, K. Simonsson, D. Gustafsson, and T. Månsson, A load history dependent model for fatigue crack propagation in Inconel 718 under hold time conditions, Engineering Fracture Mechanics, vol.118, pp.17-30, 2014.
DOI : 10.1016/j.engfracmech.2014.02.005

E. Storgärds, K. Simonsson, and S. Sjöström, Three-dimensional crack growth modelling of a Ni-based superalloy at elevated temperature and sustained loading, Theoretical and Applied Fracture Mechanics, vol.81, pp.2-10, 2016.
DOI : 10.1016/j.tafmec.2015.11.008

L. Doremus, Y. Nadot, G. Henaff, C. Mary, and S. Pierret, Calibration of the potential drop method for monitoring small crack growth from surface anomalies ??? Crack front marking technique and finite element simulations, International Journal of Fatigue, vol.70, pp.178-85, 2015.
DOI : 10.1016/j.ijfatigue.2014.09.003

S. Gourdin, L. Doremus, Y. Nadot, G. Hénaff, and S. Pierret, Fatigue crack growth from handling surface anomalies in a nickel based superalloy at high temperature, MATEC web of conferences, p.16003, 2014.

E. Storgärds and K. Simonsson, Crack Length Evaluation for Cyclic and Sustained Loading at High Temperature Using Potential Drop, Experimental Mechanics, vol.891, issue.892, pp.559-68, 2015.
DOI : 10.4028/www.scientific.net/AMR.891-892.759

F. Antunes, J. Ferreira, C. Branco, and J. Byrne, Influence of stress state on high temperature fatigue crack growth in Inconel 718, Fatigue <html_ent glyph="@amp;" ascii="&"/> Fracture of Engineering Materials and Structures, vol.17, issue.2, pp.127-162, 2001.
DOI : 10.1046/j.1460-2695.2000.00215.x

F. Riemelmoser, H. Weinhandl, O. Kolednik, and R. Pippan, The influence of irregularities in the crack shape on the crack extension measurement by means of the direct-current-potential-drop method, J Test Eval, vol.27, pp.42-48, 1999.

A. E647-05, Standard test method for measurement of fatigue crack growth rates, 2008.

H. Johnson, Calibrating the electric potential method for studying slow crack growth (calibration of electric potential technique to study slow or steady crack growth in high strength materials), Mater Res Stand, vol.5, pp.442-447, 1965.

W. Brown and J. Srawley, Plane Strain Crack Toughness Testing of High Strength Metallic Materials, 1966.
DOI : 10.1520/STP44663S

C. Carbou, Interactions fatigue-fluage sur le comportement en fissuration à haute température des superalliages pour disques de turbine. Effets d'oxydation, 2000.

D. Gustafsson and E. Lundström, High temperature fatigue crack growth behaviour of Inconel 718 under hold time and overload conditions, International Journal of Fatigue, vol.48, pp.178-86, 2013.
DOI : 10.1016/j.ijfatigue.2012.10.018

M. Hörnqvist, L. Viskari, K. Moore, and K. Stiller, High-temperature crack growth in a Ni-base superalloy during sustained load, Materials Science and Engineering: A, vol.609, pp.131-171, 2014.
DOI : 10.1016/j.msea.2014.04.102

H. Li, J. Sun, M. Hardy, H. Evans, S. Williams et al., Effects of microstructure on high temperature dwell fatigue crack growth in a coarse grain PM nickel based superalloy, Acta Materialia, vol.90, pp.355-69, 2015.
DOI : 10.1016/j.actamat.2015.02.023

J. Newman and I. Raju, An empirical stress-intensity factor equation for the surface crack, Engineering Fracture Mechanics, vol.15, issue.1-2, pp.185-92, 1981.
DOI : 10.1016/0013-7944(81)90116-8

R. Branco and F. Antunes, Finite element modelling and analysis of crack shape evolution in mode-I fatigue Middle Cracked Tension specimens, Engineering Fracture Mechanics, vol.75, issue.10, pp.3020-3057, 2008.
DOI : 10.1016/j.engfracmech.2007.12.012

C. Liu, Y. Han, and M. Yan, Creep Crack Growth Behaviour of Alloy 718, Superalloys 718, 625 and Various Derivatives (1991), pp.537-585, 1991.
DOI : 10.7449/1991/Superalloys_1991_537_548

D. Hu, Q. Ma, L. Shang, Y. Gao, and R. Wang, Creep-fatigue behavior of turbine disc of superalloy GH720Li at 650 ??C and probabilistic creep-fatigue modeling, Materials Science and Engineering: A, vol.670, pp.17-25, 2016.
DOI : 10.1016/j.msea.2016.05.117

D. Hu and R. Wang, Experimental study on creep???fatigue interaction behavior of GH4133B superalloy, Materials Science and Engineering: A, vol.515, issue.1-2, pp.183-192, 2009.
DOI : 10.1016/j.msea.2009.02.049

L. Thébaud, P. Villechaise, J. Cormier, C. Crozet, A. Devaux et al., Relationships between Microstructural Parameters and Time-Dependent Mechanical Properties of a New Nickel-Based Superalloy AD730???, Metals, vol.278, issue.4, pp.2236-51, 2015.
DOI : 10.1023/A:1010901521608