T. Alméras and M. Fournier, Biomechanical design and long-term stability of trees: Morphological and wood traits involved in the balance between weight increase and the gravitropic reaction, Journal of Theoretical Biology, vol.256, issue.3, pp.370-381, 2009.
DOI : 10.1016/j.jtbi.2008.10.011

S. Alzate, T. Filho, M. Piedade, and S. , Variação longitudinal da densidade básica da madeira de clones de Eucalyptus grandis Hill ex Maiden, E. saligna Sm. e E. grandis x urophylla, Scientia Forestalis, vol.68, pp.87-95, 2005.

A. Standards and T. Methods, D2395-02 -Standard test methods for specific gravity of wood and wood-based materials, 2002.

J. Barnett and V. Bonham, Cellulose microfibril angle in the cell wall of wood fibres, Biological Reviews, vol.44, issue.7, pp.461-472, 2004.
DOI : 10.1105/tpc.005801

J. Bouvet and H. Bailleres, Expression of some growth and wood property traits among Eucalyptus urophylla x grandis clones in Congo. CRC for Temperate Hardwood Forestry - IUFRO, pp.89-92, 1995.

L. Brancheriau and H. Baillères, Natural vibration analysis of clear wooden beams: a theoretical review, Wood Science and Technology, vol.36, issue.4, pp.347-365, 2002.
DOI : 10.1007/s00226-002-0143-7

B. Clair, J. Ruelle, and T. T. , Relationship between growth stress, mechanical-physical properties and proportion of fibre with gelatinous layer in chestnut, 2003.

C. Cruz, J. Lima, and G. Muniz, Variações dentro das árvores e entre clones das propriedades físicas e mecânicas da madeira de híbridos de Eucalyptus, Scientia Forestalis, vol.64, issue.1, pp.33-47, 2003.

G. Downes, C. Harwood, R. Washusen, N. Ebdon, R. Evans et al., Wood properties of Eucalyptus globulus at three sites in Western Australia: effects of fertilizer and plantation stocking, Australian Forestry, vol.77, pp.3-4179, 2014.

G. Downes, C. Harwood, J. Wiedemann, N. Ebdon, H. Bond et al., wood across three contrasting sites predicted by near infrared spectroscopy, Canadian Journal of Forest Research, vol.42, issue.8, pp.1577-1586, 2012.
DOI : 10.1139/x2012-083

R. Evans and J. Ilic, Rapid prediction of wood stiffness from microfibril angle and density, For Prod J, vol.51, issue.3, pp.53-57, 2001.

R. Evans, S. Stringer, and R. Kibblewhite, Variation of microfibril angle, density and fibre orientation in twenty-nine Eucalyptus nitens trees, Appita J, vol.53, pp.450-457, 2000.

J. Gonçalves, J. Stape, J. Laclau, P. Smethurst, and J. Gava, Silvicultural effects on the productivity and wood quality of eucalypt plantations, Forest Ecology and Management, vol.193, issue.1-2, pp.45-61, 2004.
DOI : 10.1016/j.foreco.2004.01.022

E. Guilley, J. Herve, and G. Nepveu, The influence of site quality, silviculture and region on wood density mixed model in Quercus petraea Liebl., Forest Ecology and Management, vol.189, issue.1-3, pp.111-121, 2004.
DOI : 10.1016/j.foreco.2003.07.033

P. Hein, Estimating shrinkage microfibril angle and density of Eucalyptus wood using near infrared spectroscopy, Journal of Near Infrared Spectroscopy, vol.20, issue.4, pp.427-436, 2012.
DOI : 10.1255/jnirs.1005

P. Hein and L. Brancheriau, Radial variation of microfibril angle and wood density and their relationships in 14-year-old Eucalyptus urophylla S.T. Blake wood, BioResources, vol.6, issue.3, pp.3352-3362, 2011.

P. Hein, L. Brancheriau, P. Trugilho, J. Lima, and G. Chaix, Resonance and near infrared spectroscopy for evaluating dynamic wood properties, Journal of Near Infrared Spectroscopy, vol.18, issue.1, pp.443-454, 2010.
DOI : 10.1255/jnirs.907
URL : http://agritrop.cirad.fr/558380/

P. Hein, J. Lima, J. Gril, A. Rosado, and L. Brancheriau, Resonance of scantlings indicates the stiffness even of small specimens of Eucalyptus from plantations, Wood Science and Technology, vol.48, issue.2, pp.621-635, 2012.
DOI : 10.1007/s00226-011-0431-1
URL : https://hal.archives-ouvertes.fr/hal-00790153

B. Jourez, A. Riboux, and A. Leclercq, ANATOMICAL CHARACTERISTICS OF TENSION WOOD AND OPPOSITE WOOD IN YOUNG INCLINED STEMS OF POPLAR (POPULUS EURAMERICANA CV 'GHOY'), IAWA Journal, vol.22, issue.2, pp.133-157, 2001.
DOI : 10.1163/22941932-90000274

F. Kollmann and W. Côté, Principles of Wood science and technology, p.592, 1968.

J. Lima, M. Breese, and C. Cahalan, Variation in compression strength parallel to the grain in Eucalyptus clones, Proceedings of the Fourth International Conference on the Development of Wood Science, Wood Technology and Forestry, p.16, 1999.

J. Lima, M. Breese, and C. Cahalan, Variation in microfibril angle in Eucalyptus clones, Holzforschung, vol.58, issue.2, pp.160-166, 2004.
DOI : 10.1515/HF.2004.024

I. Miranda, M. Almeida, and H. Pereira, Provenance and site variation of wood density in Eucalyptus globulus Labill. at harvest age and its relation to a non-destructive early assessment, Forest Ecology and Management, vol.149, issue.1-3, pp.235-240, 2001.
DOI : 10.1016/S0378-1127(00)00560-0

J. Oliveira and J. Silva, Varia????o radial da retratibilidade e densidade b??sica da madeira de Eucalyptus saligna Sm., Revista ??rvore, vol.27, issue.3, pp.381-385, 2003.
DOI : 10.1590/S0100-67622003000300015
URL : http://doi.org/10.1590/s0100-67622003000300015

T. Quilhó and H. Pereira, WITHIN AND BETWEEN-TREE VARIATION OF BARK CONTENT AND WOOD DENSITY OF EUCALYPTUS GLOBULUS IN COMMERCIAL PLANTATIONS, IAWA Journal, vol.22, issue.3, pp.255-265, 2001.
DOI : 10.1163/22941932-90000283

C. Raymond, wood properties, Annals of Forest Science, vol.59, issue.5-6, pp.525-531, 2002.
DOI : 10.1051/forest:2002037
URL : https://hal.archives-ouvertes.fr/hal-00881902

B. Thibaut, J. Gril, and M. Fournier, Mechanics of wood and trees: some new highlights for an old story, ComptesRendus de l'Academie des Sciences Series IIB Mechanics, pp.701-716, 2001.
DOI : 10.1016/S1620-7742(01)01380-0
URL : https://hal.archives-ouvertes.fr/hal-01032151

D. Thomas, K. Montagu, and J. Conroy, Temperature effects on wood anatomy, wood density, photosynthesis and biomass partitioning of Eucalyptus grandis seedlings, Tree Physiology, vol.27, issue.2, pp.251-260, 2007.
DOI : 10.1093/treephys/27.2.251

S. Timoshenko, LXVI. On the correction for shear of the differential equation for transverse vibrations of prismatic bars, Philosophical Magazine Series 6, vol.41, issue.245, pp.744-746, 1921.
DOI : 10.1080/14786442108636264

J. Walker and B. Butterfield, The importance of microfibril angle for the processing industries, New Zealand Forestry, pp.35-40, 1995.

R. Washusen, P. Ades, R. Evans, J. Ilic, and P. Vinden, Relationships between Density, Shrinkage, Extractives Content and Microfibril Angle in Tension Wood from Three Provenances of 10-Year-Old Eucalyptus globulus Labill, Holzforschung, vol.55, issue.2, pp.176-182, 2001.
DOI : 10.1515/HF.2001.029

R. Washusen and J. Ilic, Relationship between transverse shrinkage and tension wood from three provenances of Eucalyptus globulus Labill, Holz als Roh- und Werkstoff, vol.59, issue.1-2, pp.85-93, 2001.
DOI : 10.1007/s001070050480

R. Wimmer, G. Downes, R. Evans, and J. French, Effet du site sur les propri??t??s des fibres, de la p??te et des feuilles d???essai d???Eucalyptus globulus, Annals of Forest Science, vol.49, issue.6, p.602, 2008.
DOI : 10.1051/forest:2008039

H. Yamamoto, T. Okuyama, and M. Yashida, Method of determining the mean microfibril angle of wood over a wide range by the improved Cave´s method, Mokuzai Gakkaishi, vol.39, pp.118-125, 1993.

J. L. Yang and R. Evans, Prediction of MOE of eucalypt wood from microfibril angle and density, Holz als Roh- und Werkstoff, vol.61, issue.6, pp.449-452, 2003.
DOI : 10.1007/s00107-003-0424-3

S. Zhang, F. Slikjw, J. Zhang, and K. Cao, Spatial patterns of wood traits in China are controlled by phylogeny and the environment, Global Ecology and Biogeography, vol.23, issue.2, pp.241-250, 2011.
DOI : 10.1111/j.1466-8238.2010.00582.x