J. Achard, F. Silva, R. Issaoui, O. Brinza, A. Tallaire et al., Thick boron doped diamond single crystals for high power electronics, Thick boron doped diamond single crystals for high power electronics, pp.145-152, 2011.
DOI : 10.1016/j.diamond.2010.11.014

S. Koné, G. Civrac, H. Schneider, K. Isoird, R. Issaoui et al., CVD diamond Schottky barrier diode, carrying out and characterization, Diamond and Related Materials, vol.19, issue.7-9, pp.792-795, 2010.
DOI : 10.1016/j.diamond.2010.01.036

H. Ding, K. Isoird, H. Schneider, S. Kone, and G. Civrac, Basic parameters and models in simulation of CVD diamond devices, Diamond and Related Materials, vol.19, issue.5-6, pp.500-502, 2010.
DOI : 10.1016/j.diamond.2009.12.014

Y. Zhu, B. Zheng, W. Yao, and L. Cao, The interface diffusion and chemical reaction between a Ti layer and a diamond substrate, Diamond and Related Materials, vol.8, issue.6, pp.1073-1078, 1999.
DOI : 10.1016/S0925-9635(99)00090-4

T. Tachibana, B. Williams, and J. Glass, Correlation of the electrical properties of metal contacts on diamond films with the chemical nature of the metal-diamond interface. II. Titanium contacts: A carbide-forming metal, Physical Review B, vol.45, issue.20, p.11975, 1992.
DOI : 10.1103/PhysRevB.45.11975

M. Yokoba, Y. Koide, A. Otsuki, F. Ako, T. Oku et al., Carrier transport mechanism of Ohmic contact to p-type diamond, Journal of Applied Physics, vol.81, issue.10, pp.81-6815, 1997.
DOI : 10.1063/1.365240

I. Meyyappan, A. P. Malshe, H. A. Naseem, W. D. Brown, and /. Au, Au/(Ti???W) and Au/Cr metallization of chemically vapor-deposited diamond substrates for multichip module applications, Thin Solid Films, vol.253, issue.1-2, pp.407-412, 1994.
DOI : 10.1016/0040-6090(94)90357-3

S. Koné, H. Schneider, K. Isoird, F. Thion, J. Achard et al., An assessment of contact metallization for high power and high temperature diamond Schottky devices, Diamond and Related Materials, vol.27, issue.28, pp.27-28, 2012.
DOI : 10.1016/j.diamond.2012.05.007

S. Tjong, H. Ho, and S. Lee, Development of single- and multi-layered metallic films on diamond by ion beam-assisted deposition, Diamond and Related Materials, vol.10, issue.9-10, pp.1578-1583, 2001.
DOI : 10.1016/S0925-9635(01)00412-5

H. Hoff, G. Waytena, C. Vold, J. Suehle, I. Isaacson et al., Ohmic contacts to semiconducting diamond using a Ti/Pt/Au trilayer metallization scheme, Diamond and Related Materials, vol.5, issue.12, pp.1450-1456, 1996.
DOI : 10.1016/S0925-9635(96)00566-3

]. M. Werner, C. Johnston, P. Chalker, S. Romani, and I. Buckley-golder, Electrical characterisation of Al/Si ohmic contacts to heavily boron doped polycrystalline diamond films, J. Appl. Phys, issue.11, pp.79-2535, 1996.

W. Oliver and G. Pharr, An improved technique for determining hardness and elastic modulus using load and displacement sensing indentation experiments, Journal of Materials Research, vol.XI, issue.06, pp.1564-1583, 1992.
DOI : 10.1557/JMR.1992.0613

J. Alexis, B. Etcheverry, J. Beguin, and J. Bonino, Structure, morphology and mechanical properties of electrodeposited composite coatings Ni???P/SiC, Materials Chemistry and Physics, vol.120, issue.2-3, pp.244-250, 2010.
DOI : 10.1016/j.matchemphys.2009.12.013

J. Alexis, C. Gaussens, B. Etcheverry, and J. Bonino, Development of nickel???phosphorus coatings containing micro particles of talc phyllosilicates, Materials Chemistry and Physics, vol.137, issue.3, pp.723-733, 2013.
DOI : 10.1016/j.matchemphys.2012.09.049
URL : https://hal.archives-ouvertes.fr/hal-00828234

S. Msolli, J. Alexis, O. Dalverny, and M. Karama, Experimental characterization of the mechanical behavior of two solder alloys for high temperature power electronics applications, Microelectronics Reliability, vol.55, issue.1, pp.55-164, 2015.
DOI : 10.1016/j.microrel.2014.09.021
URL : https://hal.archives-ouvertes.fr/hal-01212091

N. Chechenin, A ???hydrostatic core??? model of elastic deformations in an indented film/substrate system, Thin Solid Films, vol.304, issue.1-2, pp.78-84, 1997.
DOI : 10.1016/S0040-6090(97)00210-1

L. D. Fazio, S. Syngellakis, R. Wood, F. Fugiuele, and G. Sciumé, Nanoindentation of CVD diamond: comparison of an FE model with analytical and experimental data, Diamond and Related Materials, vol.10, issue.3-7, pp.765-769, 2001.
DOI : 10.1016/S0925-9635(00)00496-9

N. Savvides and T. Bell, Hardness and elastic modulus of diamond and diamond-like carbon films, Thin Solid Films, vol.228, issue.1-2, pp.289-292, 1993.
DOI : 10.1016/0040-6090(93)90618-Y

S. Bec, A. Tonck, J. M. Georges, E. Georges, and J. L. Loubet, Improvements in the indentation method with a surface force apparatus, Philosophical Magazine A, vol.16, issue.5, pp.1061-1072, 1996.
DOI : 10.1088/0022-3727/25/3/025

N. Fujisawa and M. V. Swain, Effect of unloading strain rate on the elastic modulus of a viscoelastic solid determined by nanoindentation, Journal of Materials Research, vol.21, issue.03, pp.708-714, 2006.
DOI : 10.1557/JMR.1992.1564

N. Sakharova, J. Fernandes, J. Antunes, and M. Oliveira, Comparison between Berkovich, Vickers and conical indentation tests: A three-dimensional numerical simulation study, International Journal of Solids and Structures, vol.46, issue.5, pp.1095-1104, 2009.
DOI : 10.1016/j.ijsolstr.2008.10.032
URL : http://doi.org/10.1016/j.ijsolstr.2008.10.032