The effectiveness of indoor photocatalytic paints on NOx and HONO levels
Résumé
There is an increasing concern about the indoor air environment, where we spend most of our time. Common methods of improving indoor air quality include controlling pollution sources, increasing ventilation rates or using air purifiers. Photocatalytic remediation technology was suggested as a new possibility to eliminate indoor air pollutants instead of just diluting or disposing them. Titanium dioxide (TiO2) is a widely used photocatalyst, which is aimed to eliminate organic and inorganic pollutants. Here, we demonstrate that indoor photocatalytic paints which contain TiO2 can substantially reduce the concentrations of nitrogen dioxide (NO2). We show that the efficiency of nitrogen dioxide (NO2) removal increases with the quantity of TiO2 in the range 0-7%. The geometric uptake coefficients increase from 5 x 10(-6) to 1.6 x 10(-5) under light irradiation of the paints. On the other hand, during the reactions of NO2 with this paint (7% of TiO2) nitric oxide (NO) and nitrous acid (HONO) are formed. Nitrous acid (HONO) is an important harmful indoor pollutant and its photolysis leads to the formation of highly reactive OH radicals. Maximum conversion efficiencies of NO2 to MONO and NO of 15% and 33% were observed at 30% RH, respectively. A dynamic mass balance model applied to typical indoor environment predicts a steady state mixing ratio of 5.6 ppb of MONO released upon light-induced surface reaction of NO2 with a photocatalytic paint (7% of TiO2) and considering the photolysis process as the most important loss of MONO. The quantity of TiO2 embedded in the paint is of crucial importance with respect to nitrogen oxides NO2 remediation, but may also influence the formation of harmful intermediates like nitrous acid (MONO), which should be considered for future optimization of photocatalytic paints aimed for indoor applications. (C) 2014 Elsevier B.V. All rights reserved.