Y. F. Maydanik, Loop heat pipes, Applied Thermal Engineering, vol.25, issue.5-6, pp.635-657, 2005.
DOI : 10.1016/j.applthermaleng.2004.07.010

S. Launay, V. Sartre, and J. Bonjour, Parametric analysis of loop heat pipe operation: a literature review, International Journal of Thermal Sciences, vol.46, issue.7, pp.621-636, 2007.
DOI : 10.1016/j.ijthermalsci.2006.11.007
URL : https://hal.archives-ouvertes.fr/hal-00350755

T. Kaya, R. Pérez, C. Gregori, and A. Torres, Numerical simulation of transient operation of loop heat pipes, Applied Thermal Engineering, vol.28, issue.8-9, pp.967-974, 2008.
DOI : 10.1016/j.applthermaleng.2007.06.037

B. Siedel, V. Sartre, and F. Lefèvre, Numerical investigation of the thermohydraulic behaviour of a complete loop heat pipe, Applied Thermal Engineering, vol.61, issue.2, pp.541-553, 2013.
DOI : 10.1016/j.applthermaleng.2013.08.017
URL : https://hal.archives-ouvertes.fr/hal-01025872

M. A. Chernysheva and Y. F. Maydanik, Numerical simulation of transient heat and mass transfer in a cylindrical evaporator of a loop heat pipe, International Journal of Heat and Mass Transfer, vol.51, issue.17-18, pp.4204-4215, 2008.
DOI : 10.1016/j.ijheatmasstransfer.2007.12.021

M. A. Chernysheva and Y. F. Maydanik, Simulation of thermal processes in a flat evaporator of a copper???water loop heat pipe under uniform and concentrated heating, International Journal of Heat and Mass Transfer, vol.55, issue.25-26, pp.55-7385, 2012.
DOI : 10.1016/j.ijheatmasstransfer.2012.07.001

L. Mottet, T. Coquard, and M. Prat, Three dimensional liquid and vapour distribution in the wick of capillary evaporators, International Journal of Heat and Mass Transfer, vol.83, pp.636-651, 2015.
DOI : 10.1016/j.ijheatmasstransfer.2014.12.048

Y. Cao and A. Faghri, Analytical solutions of flow and heat transfer in a porous structure with partial heating and evaporation on the upper surface, International Journal of Heat and Mass Transfer, vol.37, issue.10, pp.1525-1533, 1994.
DOI : 10.1016/0017-9310(94)90154-6

J. Li and G. P. Peterson, 3D heat transfer analysis in a loop heat pipe evaporator with a fully saturated wick, International Journal of Heat and Mass Transfer, vol.54, issue.1-3, pp.564-574, 2011.
DOI : 10.1016/j.ijheatmasstransfer.2010.09.014

X. Zhang, X. Li, and S. Wang, Three-dimensional simulation on heat transfer in the flat evaporator of miniature loop heat pipe, International Journal of Thermal Sciences, vol.54, pp.188-198, 2012.
DOI : 10.1016/j.ijthermalsci.2011.12.002

A. S. Demidov and E. S. Yatsenko, Investigation of heat and mass transfer in the evaporation zone of a heat pipe operating by the ???inverted meniscus??? principle, International Journal of Heat and Mass Transfer, vol.37, issue.14, pp.2155-2163, 1994.
DOI : 10.1016/0017-9310(94)90317-4

C. Figus, Y. L. Bray, S. Bories, and M. Prat, Heat and mass transfer with phase change in a porous structure partially heated: continuum model and pore network simulations, Int. J. Heat Mass Transf, pp.42-2557, 1999.

T. Kaya and J. Goldak, Numerical analysis of heat and mass transfer in the capillary structure of a loop heat pipe, International Journal of Heat and Mass Transfer, vol.49, issue.17-18, pp.3211-3220, 2006.
DOI : 10.1016/j.ijheatmasstransfer.2006.01.028

T. Zhao and Q. Liao, On capillary-driven flow and phase-change heat transfer in a porous structure heated by a finned surface: measurements and modeling, International Journal of Heat and Mass Transfer, vol.43, issue.7, pp.43-1141, 2000.
DOI : 10.1016/S0017-9310(99)00206-9

Y. H. Yan and J. M. Ochterbeck, Numerical Investigation of the Steady-State Operation of a Cylindrical Capillary Pumped Loop Evaporator, Journal of Electronic Packaging, vol.125, issue.2, 2003.
DOI : 10.1115/1.1569509

X. Huang, W. Liu, A. Nakayama, and S. W. Peng, Modeling for heat and mass transfer with phase change in porous wick of CPL evaporator, Heat Mass Transf, pp.667-673, 2005.

M. A. Chernysheva and Y. F. Maydanik, Heat and Mass Transfer in Evaporator of Loop Heat Pipe, Journal of Thermophysics and Heat Transfer, vol.23, issue.4, pp.725-731, 2009.
DOI : 10.2514/1.43244

Y. Cao and A. Faghri, Conjugate analysis of a flat-plate type evaporator for capillary pumped loops with three-dimensional vapor flow in the groove, International Journal of Heat and Mass Transfer, vol.37, issue.3, pp.401-409, 1994.
DOI : 10.1016/0017-9310(94)90074-4

]. Y. Xuan, K. Zhao, and Q. Li, Investigation on Heat and Mass Transfer in a Evaporator of a Capillary-Pumped Loop with the Lattice Boltzmann Method: Pore Scale Simulation, Transport in Porous Media, vol.52, issue.10, pp.337-355, 2011.
DOI : 10.1007/s11242-011-9774-1

T. Coquard, Transferts couplés de masse et de chaleur dans un élément d'évaporateur capillaire, 2006.

R. Singh, A. Akbarzadeh, and M. Mochizuki, Effect of Wick Characteristics on the Thermal Performance of the Miniature Loop Heat Pipe, Journal of Heat Transfer, vol.131, issue.8, 2009.
DOI : 10.1115/1.3109994

S. Wu, C. Huang, S. Chen, and Y. Chen, Manufacturing and testing of the double-layer wick structure in a loop heat pipe, International Journal of Heat and Mass Transfer, vol.56, issue.1-2, pp.709-714, 2013.
DOI : 10.1016/j.ijheatmasstransfer.2012.09.054

N. S. Rasor and J. L. Desplat, K-Max: a material with exceptional heat transfer properties, Proceedings of the 24th Intersociety Energy Conversion Engineering Conference, 1989.
DOI : 10.1109/IECEC.1989.74397

C. Yeh, C. Chen, and Y. Chen, Heat transfer analysis of a loop heat pipe with biporous wicks, International Journal of Heat and Mass Transfer, vol.52, issue.19-20, pp.4426-4434, 2009.
DOI : 10.1016/j.ijheatmasstransfer.2009.03.059

X. L. Cao, P. Cheng, and T. S. Zhao, Experimental Study of Evaporative Heat Transfer in Sintered Copper Bidispersed Wick Structures, Journal of Thermophysics and Heat Transfer, vol.16, issue.4, pp.547-552, 2002.
DOI : 10.2514/2.6730

T. Semenic, Y. Y. Lin, and I. Catton, Use of Liquid Film Evaporation in Biporous Media to Achieve High Heat Flux Over Large Areas, Heat Transfer: Volume 2, pp.1-6, 2005.
DOI : 10.1115/HT2005-72238

T. Semenic, Y. Y. Lin, and I. Catton, Use of Liquid Film Evaporation in Biporous Media to Achieve High Heat Flux Over Large Areas, Heat Transfer: Volume 2, pp.45-51, 2005.
DOI : 10.1115/HT2005-72238

T. Semenic, Y. Y. Lin, and I. Catton, Thermophysical Properties of Biporous Heat Pipe Evaporators, Journal of Heat Transfer, vol.130, issue.2, 2008.
DOI : 10.1115/1.2790020

T. Semenic, Y. Y. Lin, I. Catton, and D. B. Sarraf, Use of biporous wicks to remove high heat fluxes, Applied Thermal Engineering, vol.28, issue.4, pp.278-283, 2008.
DOI : 10.1016/j.applthermaleng.2006.02.030

T. Semenic and I. Catton, Experimental study of biporous wicks for high heat flux applications, International Journal of Heat and Mass Transfer, vol.52, issue.21-22, pp.5113-5121, 2009.
DOI : 10.1016/j.ijheatmasstransfer.2009.05.005

F. Lin, B. Liu, C. Juan, and Y. Chen, Effect of pore size distribution in bidisperse wick on heat transfer in a loop heat pipe, Heat and Mass Transfer, vol.1, issue.8, pp.933-940, 2011.
DOI : 10.1007/s00231-011-0841-5

C. Yeh, B. Liu, and Y. Chen, A study of loop heat pipe with biporous wicks, Heat Mass Transf, pp.1537-1547, 2008.

S. Wu, D. Wang, W. Lin, and Y. Chen, Investigating the effect of powder-mixing parameter in biporous wick manufacturing on enhancement of loop heat pipe performance, International Journal of Heat and Mass Transfer, vol.89, pp.460-467, 2015.
DOI : 10.1016/j.ijheatmasstransfer.2015.05.074

S. Wu, B. H. Hsieh, D. Wang, and Y. Chen, Manufacture of a biporous nickel wick and its effect on LHP heat transfer performance enhancement, Heat and Mass Transfer, vol.75, issue.489, pp.231-246, 2015.
DOI : 10.1007/s00231-015-1503-9

H. Li, Z. Liu, B. Chen, W. Liu, C. Li et al., Development of biporous wicks for flat-plate loop heat pipe, Experimental Thermal and Fluid Science, vol.37, pp.91-97, 2012.
DOI : 10.1016/j.expthermflusci.2011.10.007

S. Wu, F. Lin, S. Chen, C. Yeh, S. K. Wang et al., Manufacturing of the complex wick with double-layer bi-porous structure and applying to a loop heat, 10th International Heat Pipe Symposium, pp.104-108, 2011.

J. Wang and I. Catton, Evaporation heat transfer in thin biporous media, Heat and Mass Transfer, vol.37, issue.2-3, pp.275-281, 2001.
DOI : 10.1007/s002310000138

A. Vadnjal and I. , Catton, Modelling heat transfer performance of a thin bi-porous evaporator for a heat pipe, 2005.

S. W. Reilly and I. Catton, Utilization of Pore-Size Distributions to Predict Thermophysical Properties and Performance of Biporous Wick Evaporators, Journal of Heat Transfer, vol.136, issue.6
DOI : 10.1115/1.4026624

M. A. Chernysheva and Y. F. Maydanik, Heat and mass investigation in the evaporation zone of a loop heat pipe, 7th Minsk International Conference ''Heat Pipes, Heat Pumps, Refrigerators, Power Sources, pp.79-86, 2008.

F. Lin, B. Liu, C. Huang, and Y. Chen, Evaporative heat transfer model of a loop heat pipe with bidisperse wick structure, International Journal of Heat and Mass Transfer, vol.54, issue.21-22, pp.4621-4629, 2011.
DOI : 10.1016/j.ijheatmasstransfer.2011.06.015

C. Sleicher and M. Rouse, A convenient correlation for heat transfer to constant and variable property fluids in turbulent pipe flow, International Journal of Heat and Mass Transfer, vol.18, issue.5, pp.677-683, 1975.
DOI : 10.1016/0017-9310(75)90279-3

S. Patankar, Numerical heat transfer and fluid flow, 1980.

S. Wu, T. Gu, D. Wang, and Y. Chen, Study of PTFE wick structure applied to loop heat pipe, Applied Thermal Engineering, vol.81, pp.51-57, 2015.
DOI : 10.1016/j.applthermaleng.2015.01.048