T. Hughes, J. Cottrell, and Y. Bazilevs, Isogeometric analysis: CAD, finite elements, NURBS, exact geometry and mesh refinement, Computer Methods in Applied Mechanics and Engineering, vol.194, issue.39-41, pp.4135-4195, 2005.
DOI : 10.1016/j.cma.2004.10.008

J. A. Cottrell, T. J. Hughes, and Y. Bazilevs, Isogeometric Analysis: Toward Integration of CAD and FEA, 2009.
DOI : 10.1002/9780470749081

W. Wall, M. Frenzel, and C. Cyron, Isogeometric structural shape optimization, Computer Methods in Applied Mechanics and Engineering, vol.197, issue.33-40, pp.33-40, 2008.
DOI : 10.1016/j.cma.2008.01.025

A. P. Nagy, M. M. Abdalla, Z. Grdal, and A. Structures, Isogeometric Sizing and Shape Optimization of Beam Structures, 50th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference, p.50, 2009.
DOI : 10.2514/6.2009-2211

D. Nguyen, A. Evgrafov, and J. Gravesen, ISOGEOMETRIC SHAPE OPTIMIZATION FOR ELECTROMAGNETIC SCATTERING PROBLEMS, Progress In Electromagnetics Research B, vol.45, pp.117-146, 2012.
DOI : 10.2528/PIERB12091308

P. Nørtoft and J. Gravesen, Isogeometric shape optimization in fluid mechanics, Structural and Multidisciplinary Optimization, pp.909-925, 2013.

X. Qian and O. Sigmund, Isogeometric shape optimization of photonic crystals via Coons patches, Computer Methods in Applied Mechanics and Engineering, vol.200, issue.25-28, pp.2237-2255, 2011.
DOI : 10.1016/j.cma.2011.03.007

S. Cho and S. Ha, Isogeometric shape design optimization:exact geometry and enhanced sensitivity , Structural and Multidisciplinary Optimization, pp.53-70, 2009.

H. Lian, R. Simpson, and S. Bordas, Sensitivity Analysis and Shape Optimisation through a T-spline Isogeometric Boundary Element Method, International Conference on Computational Mechanics (CM13), 2013.

X. Qian, Full analytical sensitivities in NURBS based isogeometric shape optimization, Computer Methods in Applied Mechanics and Engineering, vol.199, issue.29-32, pp.29-32, 2010.
DOI : 10.1016/j.cma.2010.03.005

K. Li and X. Qian, Isogeometric analysis and shape optimization via boundary integral, Computer-Aided Design, vol.43, issue.11, pp.1427-1437, 2011.
DOI : 10.1016/j.cad.2011.08.031

K. V. Kostas, A. I. Ginnis, C. G. Politis, and P. D. Kaklis, Ship-hull shape optimization with a T-spline based BEM???isogeometric solver, Computer Methods in Applied Mechanics and Engineering, vol.284, pp.611-622, 2015.
DOI : 10.1016/j.cma.2014.10.030

A. I. Ginnis, R. Duvigneau, C. Politis, K. V. Kostas, K. Belibassakis et al., Objective Optimization Environment for Ship-Hull Design based on a BEM- Isogeometric Solver, The fifth Conference on Computational Methods in Marine Engineering, 2013.
URL : https://hal.archives-ouvertes.fr/hal-00873282

L. Morino, Boundary Integral Equations in Aerodynamics, Applied Mechanics Reviews, vol.46, issue.8, pp.445-466, 1993.
DOI : 10.1115/1.3120373

M. Gennaretti, G. Calcagno, A. Zamboni, and L. Morino, A high order boundary element formulation for potential incompressible aerodynamics, Aeronautical Journal, vol.102, pp.211-219, 1014.

F. Paris and J. Canas, Boundary Element Method: Fundamentals and Applications, 1997.

J. Hess and A. Smith, Calculation of non-lifting potential flow about arbitrary 3-D bodies, Tech. Rep. Report E.S, vol.40622, 1962.

J. Hess, Calculation of potential flow around arbitrary three dimensional lifting bodies, 1972.

J. Hess and W. Valarezo, Calculation of steady flow around propellers by means of a surface panel method, 23rd Aerospace Sciences Meeting, 1985.

L. Morino and C. Kuo, Subsonic potential aerodynamics for complex configurations -A general theory, AIAA Journal, vol.12, issue.2, pp.191-197, 1974.

S. Kinnas, Theory and numerical methods of hydrodynamic analysis of marine propellers, Advances in Marine Hydrodynamics, 1996.

K. Belibassakis and G. Politis, A boundary integral equation formulation of the Neumann problem for a vector field in R3 with application to potential lifting flows, Engineering Analysis with Boundary Elements, vol.16, issue.1, pp.5-17, 1995.
DOI : 10.1016/0955-7997(95)00045-3

K. Belibassakis and G. , Politis, A non-linear velocity based Boundary Element Method for the analysis of marine propellers in unsteady flow, International Shipbuilding Progress, vol.45, pp.93-133, 1998.

C. Lee and J. Kerwin, A B-spline higher-order panel method applied to two-dimensional lifting problem, Journal of Ship Research, vol.47, issue.4, pp.290-298, 2003.

G. Kim, C. Lee, and J. Kerwin, A B-spline based higher order panel method for analysis of steady flow around marine propellers, Ocean Engineering, vol.34, issue.14-15, pp.34-2045, 2007.
DOI : 10.1016/j.oceaneng.2007.02.013

Z. Gao and Z. Zou, A NURBS-based high-order panel method for three-dimensional radiation and diffraction problems with forward speed, Ocean Engineering, vol.35, issue.11-12, pp.1271-1282, 2008.
DOI : 10.1016/j.oceaneng.2008.02.007

C. Politis, A. Ginnis, P. Kaklis, K. Belibassakis, and C. Feuer, An isogeometric BEM for exterior potential-flow problems in the plane, 2009 SIAM/ACM Joint Conference on Geometric and Physical Modeling on, SPM '09, 2009.
DOI : 10.1145/1629255.1629302

R. Simpson, S. Bordas, J. Trevelyan, and T. Rabczuk, A two-dimensional Isogeometric Boundary Element Method for elastostatic analysis, Computer Methods in Applied Mechanics and Engineering, vol.209, issue.212, pp.87-100, 2012.
DOI : 10.1016/j.cma.2011.08.008

M. Scott, R. Simpson, J. Evans, S. Lipton, S. Bordas et al., Isogeometric boundary element analysis using unstructured T-splines, Computer Methods in Applied Mechanics and Engineering, vol.254, pp.197-221, 2013.
DOI : 10.1016/j.cma.2012.11.001

K. A. Belibassakis, T. P. Gerosthathis, K. V. Kostas, C. G. Politis, P. D. Kaklis et al., A BEM-isogeometric method for the ship wave-resistance problem, Ocean Engineering, vol.60, pp.60-53, 2013.
DOI : 10.1016/j.oceaneng.2012.12.030

M. Peake, J. Trevelyan, and G. Coates, Extended isogeometric boundary element method (XIBEM) for two-dimensional Helmholtz problems, Computer Methods in Applied Mechanics and Engineering, vol.259, pp.93-102, 2013.
DOI : 10.1016/j.cma.2013.03.016

R. N. Simpson, M. A. Scott, M. Taus, D. C. Thomas, and H. Lian, Acoustic isogeometric boundary element analysis, Computer Methods in Applied Mechanics and Engineering, vol.269, pp.265-290, 2014.
DOI : 10.1016/j.cma.2013.10.026

A. I. Ginnis, K. V. Kostas, C. G. Politis, P. D. Kaklis, K. A. Belibassakis et al., Isogeometric boundary-element analysis for the wave-resistance problem using T-splines, Computer Methods in Applied Mechanics and Engineering, vol.279, pp.425-439, 2014.
DOI : 10.1016/j.cma.2014.07.001

R. Meyer, Introduction to Mathematical Fluid Dynamics, 1971.

P. Bassanini, C. Casciola, M. Lancia, and R. Piva, A Boundary Integral Equation Formulation of the Neumann Problem for a Vector Field in R 3 with Application to Potential Lifting Flows, Meccanica, vol.34, issue.3, pp.199-229, 1999.
DOI : 10.1023/A:1004571915758

L. Morino and G. Bernardini, Singularities in BIEs for the Laplace equation; Joukowski trailing-edge conjecture revisited, Engineering Analysis with Boundary Elements, vol.25, issue.9, pp.805-818, 2001.
DOI : 10.1016/S0955-7997(01)00063-7

L. Piegl and W. Tiller, The Nurbs Book, 1997.

J. Moran, An introduction to theoretical and computational aerodynamics, 1984.

K. Deb, Multi-Objective Optimization Using Evolutionary Algorithms, 2001.