Mechanical properties and failure behavior of unidirectional porous ceramics

J. Seuba (1) , S. Deville (1) , C. Guizard (2) , A. J. Stevenson (1)

1 LSFC - Laboratoire de Synthèse et Fonctionnalisation des Céramiques
2 IEM - Institut Européen des membranes

We show that the honeycomb out-of-plane model derived by Gibson and Ashby can be applied to describe the compressive behavior of unidirectional porous materials. Icelating allowed us to process samples with accurate control over pore volume, size, and morphology. These samples allowed us to evaluate the effect of this microstructural variations on the compressive strength in a porosity range of 45-80%. The maximum strength of 286 MPa was achieved in the least porous icelated sample (P(%) = 49.9), with the smallest pore size (3 μm). We found that the out-of-plane model only holds when buckling is the dominant failure mode, as should be expected. Furthermore, we controlled total pore volume by adjusting solids loading and sintering temperature. This strategy allows us to independently control macroporosity and densification of walls, and the compressive strength of icelated materials is exclusively dependent on total pore volume.

Domaines: Matériaux

J. Seuba, S. Deville, C. Guizard, A. J. Stevenson. Mechanical properties and failure behavior of unidirectional porous ceramics. Scientific Reports, 2016, 6 (1), pp.6:24326. ⟨10.1038/srep24326⟩. ⟨hal-01342200⟩