non-noble intermetallic compounds as selective hydrogenation catalysts: butadiene hydrogenation over al13fe4 - Archive ouverte HAL Accéder directement au contenu
Communication Dans Un Congrès Année : 2016

non-noble intermetallic compounds as selective hydrogenation catalysts: butadiene hydrogenation over al13fe4

L. Kibis
  • Fonction : Auteur

Résumé

Non-noble intermetallic compounds have shown promising properties as inexpensive catalyst alternatives to Pt-group metals for alkyne [1] and alkene [2] partial hydrogenation. In this work, the gas-phase hydrogenation of 1,3-butadiene over the Al13Fe4(010) surface was investigated in the 0.2-2 kPa range at 20-200 °C in a batch-type reactor coupled with an ultrahigh-vacuum setup allowing for Auger electron spectroscopy (AES) and low energy electron diffraction (LEED). The results were compared with those obtained for Pd(100) in the same conditions. It is shown that Al-Fe is initially as active as Pd and 100% selective to butenes, including at room temperature (RT), with sequential conversions of butadiene to butenes, and butenes to butane [2,3]. The main difference with Pd comes from the butenes distribution, with a cis/trans 2-butene ratio larger than unity for Al-Fe while it is near zero for Pd. The results are discussed in terms of (i) steric constraints upon π-allylic precursors to 2-butenes and (ii) involvement of adsorbed butyl intermediates allowing for hydro-isomerization of butenes competing with their hydrogenation to butane. A mechanistic reaction scheme is proposed accordingly [3]. The sensitivity of the Al-Fe surface to oxygen-containing impurities leads to gradual deactivation under reaction conditions, which is the main issue for the practical use of non-noble metal catalysts. The deactivation and oxidation processes were investigated by combining in situ post-reaction AES measurements with several thermal/chemical treatments. Depending on the pressure conditions, the Al13Fe4 surface chemisorbs oxygen-containing species or forms an Al oxide layer. The RT activity of the surface decreases as the oxygen-containing phase coverage increases. However, the alloy surface can be fully regenerated through high-temperature annealing [3]. [1] M. Armbrüster et al., Nat. Mater. 11 (2012) 690–693. [2] L. Piccolo, Chem. Commun. 49 (2013) 9149–9151. [3] L. Piccolo, L. Kibis, J. Catal. 332 (2015) 112-118.
Fichier non déposé

Dates et versions

hal-01323952 , version 1 (31-05-2016)

Identifiants

  • HAL Id : hal-01323952 , version 1

Citer

L. Piccolo, L. Kibis. non-noble intermetallic compounds as selective hydrogenation catalysts: butadiene hydrogenation over al13fe4. French Conference on Catalysis (FCCat), May 2016, Fréjus France. ⟨hal-01323952⟩
99 Consultations
0 Téléchargements

Partager

Gmail Facebook X LinkedIn More