P. Wang, X. Legrand, P. Boisse, N. Hamila, and D. Soulat, Experimental and numerical analyses of manufacturing process of a composite square box part: Comparison between textile reinforcement forming and surface 3D weaving, Composites Part B: Engineering, vol.78, pp.26-34, 2015.
DOI : 10.1016/j.compositesb.2015.03.072

A. Prodromou and J. Chen, On the relationship between shear angle and wrinkling of textile composite preforms, Composites Part A: Applied Science and Manufacturing, vol.28, issue.5, pp.491-503, 1997.
DOI : 10.1016/S1359-835X(96)00150-9

A. Skordos, C. Aceves, and M. Sutcliffe, A simplified rate dependent model of forming and wrinkling of pre-impregnated woven composites, Composites Part A: Applied Science and Manufacturing, vol.38, issue.5, pp.1318-1330, 2007.
DOI : 10.1016/j.compositesa.2006.11.005

P. Hallander, M. Akermo, C. Mattei, M. Petersson, and T. Nyman, An experimental study of mechanisms behind wrinkle development during forming of composite laminates, Composites Part A: Applied Science and Manufacturing, vol.50, pp.54-64, 2013.
DOI : 10.1016/j.compositesa.2013.03.013

P. Boisse, N. Hamila, E. Vidal-sallé, and F. Dumont, Simulation of wrinkling during textile composite reinforcement forming. Influence of tensile, in-plane shear and bending stiffnesses, Composites Science and Technology, vol.71, issue.5, pp.683-692, 2011.
DOI : 10.1016/j.compscitech.2011.01.011
URL : https://hal.archives-ouvertes.fr/hal-00578046

W. Yu, P. Harrison, and A. Long, Finite element forming simulation for non-crimp fabrics using a non-orthogonal constitutive equation, Composites Part A: Applied Science and Manufacturing, vol.36, issue.8, pp.1079-1093, 2005.
DOI : 10.1016/j.compositesa.2005.01.007

N. Hamila, P. Boisse, F. Sabourin, and M. Brunet, A semi-discrete shell finite element for textile composite reinforcement forming simulation, International Journal for Numerical Methods in Engineering, vol.39, issue.7, pp.1443-1466, 2009.
DOI : 10.1007/s12289-008-0265-z
URL : https://hal.archives-ouvertes.fr/hal-00515898

S. Haanappel, R. Ten-thije, U. Sachs, B. Rietman, and R. Akkerman, Formability analyses of uni-directional and textile reinforced thermoplastics, Composites Part A: Applied Science and Manufacturing, vol.56, pp.80-92, 2014.
DOI : 10.1016/j.compositesa.2013.09.009

J. Smith, U. Vaidya, and J. Johnstone, Analytical modeling of deformed plain woven thermoplastic composites, International Journal of Material Forming, vol.33, issue.4, pp.379-393, 2014.
DOI : 10.1007/s12289-013-1133-z

M. Hübner, J. Rocher, S. Allaoui, G. Hivet, T. Gereke et al., Simulation-based investigations on the drape behavior of 3D woven fabrics made of commingled yarns, Int J Mater Form, 2015.

. Fig, 33 Bias-extension test for 58° shear angle with local sliding (a) experiments, (b) corresponding mesoscopic finite element simulation. (c) pin-joint kinematics (d) Shear angle as a function of displacement, including theory (Eq. (1)), experimental test, and simulations with shell and membrane elements

S. Bickerton, P. ?imá?ek, S. Guglielmi, and S. Advani, Investigation of draping and its effects on the mold filling process during manufacturing of a compound curved composite part, Composites Part A: Applied Science and Manufacturing, vol.28, issue.9-10, pp.801-816, 1997.
DOI : 10.1016/S1359-835X(97)00033-X

L. Gascón, J. García, F. Lebel, E. Ruiz, and F. Trochu, A twophase flow model to simulate mold filling and saturation in Resin Transfer Molding, Int J Mater Form, 2015.

M. Blais, N. Moulin, P. Liotier, and S. Drapier, Resin infusionbased processes simulation: coupled Stokes-Darcy flows in orthotropic preforms undergoing finite strain, Int J Mater Form, 2015.

E. Lopez, E. Abisset-chavanne, F. Lebel, R. Upadhyay, S. Comas et al., Flow modeling of linear and nonlinear fluids in two and three scale fibrous fabrics, International Journal of Material Forming, vol.72, issue./12, 2015.
DOI : 10.1007/s12289-015-1224-0

J. Lindberg, B. Behre, and B. Dahlberg, Part III: Shearing and Buckling of Various Commercial Fabrics, Textile Research Journal, vol.28, issue.2, pp.99-122, 1961.
DOI : 10.1177/004051756103100203

P. Grosberg and B. Park, The Mechanical Properties of Woven Fabrics, Textile Research Journal, vol.36, issue.5, pp.420-431, 1966.
DOI : 10.1177/004051756603600505

P. Grosberg, G. Leaf, and B. Park, The Mechanical Properties of Woven Fabrics, Textile Research Journal, vol.56, issue.12, pp.1085-1100, 1968.
DOI : 10.1177/004051756803801102

S. Spivak and L. Treloar, The Behavior of Fabrics in Shear, Textile Research Journal, vol.40, issue.2, pp.963-971, 1968.
DOI : 10.1177/004051756803800911

J. Skelton, Fundamental of fabric shear, Text Res J, vol.46, issue.12, pp.862-869, 1976.

G. Mcguinness and C. O_bradaigh, Development of rheological models for forming flows and picture-frame shear testing of fabric reinforced thermoplastic sheets, Journal of Non-Newtonian Fluid Mechanics, vol.73, issue.1-2, pp.1-28, 1997.
DOI : 10.1016/S0377-0257(97)00040-2

J. Wang, J. Page, and R. Paton, Experimental investigation of the draping properties of reinforcement fabrics, Composites Science and Technology, vol.58, issue.2, pp.229-237, 1998.
DOI : 10.1016/S0266-3538(97)00115-2

J. Page and J. Wang, Prediction of shear force and an analysis of yarn slippage for a plain-weave carbon fabric in a bias extension state, Composites Science and Technology, vol.60, issue.7, pp.977-986, 2000.
DOI : 10.1016/S0266-3538(99)00198-0

J. Page and J. Wang, Prediction of shear force using 3D non-linear FEM analyses for a plain weave carbon fabric in a bias extension state, Finite Elements in Analysis and Design, vol.38, issue.8, pp.755-764, 2002.
DOI : 10.1016/S0168-874X(01)00104-4

K. Potter, Bias extension measurements on cross-plied unidirectional prepreg, Composites Part A: Applied Science and Manufacturing, vol.33, issue.1, pp.63-73, 2002.
DOI : 10.1016/S1359-835X(01)00057-4

J. Cao, R. Akkerman, P. Boisse, and J. Chen, Characterization of mechanical behavior of woven fabrics: Experimental methods and benchmark results, Composites Part A: Applied Science and Manufacturing, vol.39, issue.6, pp.1037-1053, 2008.
DOI : 10.1016/j.compositesa.2008.02.016
URL : https://hal.archives-ouvertes.fr/hal-00437730

J. Hu and Y. Zhang, The KES Shear Test for Fabrics, Textile Research Journal, vol.67, issue.9, pp.654-664, 1997.
DOI : 10.1177/004051759706700904

S. Haanappel and R. Akkerman, Shear characterisation of uni-directional fibre reinforced thermoplastic melts by means of torsion, Composites Part A: Applied Science and Manufacturing, vol.56, pp.8-26, 2014.
DOI : 10.1016/j.compositesa.2013.09.007

M. Nguyen, I. Herszberg, and R. Paton, The shear properties of woven carbon fabric, Composite Structures, vol.47, issue.1-4, pp.767-779, 1999.
DOI : 10.1016/S0263-8223(00)00051-9

U. Mohammed, C. Lekakou, L. Dong, and M. Bader, Shear deformation and micromechanics of woven fabrics, Composites Part A: Applied Science and Manufacturing, vol.31, issue.4, pp.299-308, 2000.
DOI : 10.1016/S1359-835X(99)00081-0

G. Hivet and A. Duong, A contribution to the analysis of the intrinsic shear behavior of fabrics, Journal of Composite Materials, vol.45, issue.6, pp.695-716, 2011.
DOI : 10.1177/0021998310382315

G. Lebrun, M. Bureau, and J. Denault, Evaluation of bias-extension and picture-frame test methods for the measurement of intraply shear properties of PP/glass commingled fabrics, Composite Structures, vol.61, issue.4, pp.341-352, 2003.
DOI : 10.1016/S0263-8223(03)00057-6

P. Harrison, M. Clifford, and A. Long, Shear characterisation of viscous woven textile composites: a comparison between picture frame and bias extension experiments, Composites Science and Technology, vol.64, issue.10-11, pp.1453-1465, 2004.
DOI : 10.1016/j.compscitech.2003.10.015

J. Launay, G. Hivet, A. Duong, and P. Boisse, Experimental analysis of the influence of tensions on in plane shear behaviour of woven composite reinforcements, Composites Science and Technology, vol.68, issue.2, pp.506-515, 2008.
DOI : 10.1016/j.compscitech.2007.06.021
URL : https://hal.archives-ouvertes.fr/hal-00498991

C. Mark and H. Taylor, The fitting of woven cloth to surfaces, J Text Instit, vol.47, pp.477-488, 1956.

F. Van-der-ween, Algorithms for draping fabrics on doubly-curved surfaces, International Journal for Numerical Methods in Engineering, vol.22, issue.7, pp.1414-1426, 1991.
DOI : 10.1002/nme.1620310712

A. Cherouat, H. Borouchaki, and J. Billoet, Geometrical and mechanical draping of composite fabric, Revue Europ??enne des ??l??ments Finis, vol.31, issue.6-7, pp.6-7693, 2005.
DOI : 10.3166/reef.14.693-707
URL : https://hal.archives-ouvertes.fr/hal-00020293

S. Lomov, P. Boisse, E. Deluycker, F. Morestin, K. Vanclooster et al., Full-field strain measurements in textile deformability studies, Composites Part A: Applied Science and Manufacturing, vol.39, issue.8, pp.1232-1244, 2008.
DOI : 10.1016/j.compositesa.2007.09.014
URL : https://hal.archives-ouvertes.fr/hal-00383576

J. Pazmino, V. Carvelli, S. Lomov, B. Van-mieghem, and P. Lava, 3D digital image correlation measurements during shaping of a non-crimp 3D orthogonal woven E-glass reinforcement, International Journal of Material Forming, vol.65, issue.4, pp.439-446, 2014.
DOI : 10.1007/s12289-013-1139-6

B. Zouari, J. Daniel, and P. Boisse, A woven reinforcement forming simulation method. Influence of the shear stiffness, Computers & Structures, vol.84, issue.5-6, pp.5-6351, 2006.
DOI : 10.1016/j.compstruc.2005.09.031
URL : https://hal.archives-ouvertes.fr/hal-00383406

X. Peng, J. Cao, J. Chen, P. Xue, D. Lussier et al., Experimental and numerical analysis on normalization of picture frame tests for composite materials, Composites Science and Technology, vol.64, issue.1, pp.11-21, 2004.
DOI : 10.1016/S0266-3538(03)00202-1

P. Harrison, J. Wiggers, and A. Long, Normalization of Shear Test Data for Rate-independent Compressible Fabrics, Journal of Composite Materials, vol.64, issue.3, pp.2315-2344, 2008.
DOI : 10.1177/0021998308095367

F. Härtel and P. Harrison, Evaluation of normalisation methods for uniaxial bias extension tests on engineering fabrics, Composites Part A: Applied Science and Manufacturing, vol.67, pp.61-69, 2014.
DOI : 10.1016/j.compositesa.2014.08.011

J. Cao, H. Cheng, and T. Yu, A cooperative benchmark effort on testing of woven composites, Proceedings of the 7th int. ESAFORM conference on material forming, pp.305-313, 2004.
URL : https://hal.archives-ouvertes.fr/hal-00507348

N. Hamila and P. Boisse, A Meso???Macro Three Node Finite Element for Draping of Textile Composite Preforms, Applied Composite Materials, vol.38, issue.1???2, pp.235-250, 2007.
DOI : 10.1007/s10443-007-9043-1
URL : https://hal.archives-ouvertes.fr/hal-00380796

N. Hamila and P. Boisse, Simulations of textile composite reinforcement draping using a new semi-discrete three node finite element, Composites Part B: Engineering, vol.39, issue.6, pp.999-1010, 2008.
DOI : 10.1016/j.compositesb.2007.11.008
URL : https://hal.archives-ouvertes.fr/hal-00381446

G. Hivet, E. Vidal-sallé, and P. Boisse, Analysis of the stress components in a textile composite reinforcement, Journal of Composite Materials, vol.47, issue.3, pp.269-285, 2013.
DOI : 10.1177/0021998312439222
URL : https://hal.archives-ouvertes.fr/hal-00785642

Y. Basar and D. Weichert, Nonlinear continuum mechanics of solids: fundamental mathematical and physical concepts, 2000.

E. Guzman-maldonado, Modélisation et simulation de la mise en forme des matériaux composites préimprégnés à matrice thermoplastique et à fibres continues, 2016.

D. Marquardt, An Algorithm for Least-Squares Estimation of Nonlinear Parameters, Journal of the Society for Industrial and Applied Mathematics, vol.11, issue.2, pp.431-441, 1963.
DOI : 10.1137/0111030

D. Schnur and N. Zabaras, An inverse method for determining elastic material properties and a material interface, International Journal for Numerical Methods in Engineering, vol.1, issue.10, pp.2039-2057, 1992.
DOI : 10.1002/nme.1620331004

P. Wang, N. Hamila, and P. Boisse, Thermoforming simulation of multilayer composites with continuous fibres and thermoplastic matrix, Composites Part B: Engineering, vol.52, pp.127-136, 2013.
DOI : 10.1016/j.compositesb.2013.03.045
URL : https://hal.archives-ouvertes.fr/hal-00938369

P. Wang, N. Hamila, P. Pineau, and P. Boisse, Thermomechanical analysis of thermoplastic composite prepregs using bias-extension test, Journal of Thermoplastic Composite Materials, vol.92, issue.1, pp.679-698, 2014.
DOI : 10.1533/9781845695446

Y. Gupta, A. Chakraborty, G. Pandey, and D. Setua, Thermal and thermooxidative degradation of engineering thermoplastics and life estimation, Journal of Applied Polymer Science, vol.34, issue.3, pp.1737-1748, 2004.
DOI : 10.1002/app.20134

E. Guzman-maldonado, N. Hamila, P. Boisse, and J. Bikard, Thermomechanical analysis, modelling and simulation of the forming of pre-impregnated thermoplastics composites, Composites Part A: Applied Science and Manufacturing, vol.78, pp.211-222, 2015.
DOI : 10.1016/j.compositesa.2015.08.017

E. Guzman-maldonado, N. Hamila, N. Naouar, G. Moulin, and P. Boisse, Simulation of thermoplastic prepreg thermoforming based on a visco-hyperelastic model and a thermal homogenization, Materials & Design, vol.93, pp.431-442, 2016.
DOI : 10.1016/j.matdes.2015.12.166

F. Nosrat-nezami, T. Gereke, C. Eberdt, and C. Cherif, Characterisation of the shear???tension coupling of carbon-fibre fabric under controlled membrane tensions for precise simulative predictions of industrial preforming processes, Composites Part A: Applied Science and Manufacturing, vol.67, pp.131-139, 2014.
DOI : 10.1016/j.compositesa.2014.08.030

S. Lomov and I. Verpoest, Model of shear of woven fabric and parametric description of shear resistance of glass woven reinforcements, Composites Science and Technology, vol.66, issue.7-8, pp.919-933, 2006.
DOI : 10.1016/j.compscitech.2005.08.010

P. Harrison, F. Abdiwi, Z. Guo, P. Potluri, and W. Yu, Characterising the shear???tension coupling and wrinkling behaviour of woven engineering fabrics, Composites Part A: Applied Science and Manufacturing, vol.43, issue.6, pp.903-914, 2012.
DOI : 10.1016/j.compositesa.2012.01.024

S. Sharma, M. Sutcliffe, and S. Chang, Characterisation of material properties for draping of dry woven composite material, Composites Part A: Applied Science and Manufacturing, vol.34, issue.12, pp.1167-1175, 2003.
DOI : 10.1016/j.compositesa.2003.09.001

P. Harrison, Normalisation of biaxial bias extension test results considering shear tension coupling, Composites Part A: Applied Science and Manufacturing, vol.43, issue.9, pp.1546-1554, 2012.
DOI : 10.1016/j.compositesa.2012.04.014

K. Potter, The influence of accurate stretch data for reinforcements on the production of complex structural mouldings, Composites, vol.10, issue.3, pp.161-173, 1979.
DOI : 10.1016/0010-4361(79)90291-X

B. Zhu, T. Yu, and X. Tao, Large deformation and slippage mechanism of plain woven composite in bias extension, Composites Part A: Applied Science and Manufacturing, vol.38, issue.8, pp.1821-1828, 2007.
DOI : 10.1016/j.compositesa.2007.04.009

S. Bel, P. Boisse, and F. Dumont, Analyses of the Deformation Mechanisms of Non-Crimp Fabric Composite Reinforcements during Preforming, Applied Composite Materials, vol.79, issue.3-4, pp.513-528, 2012.
DOI : 10.1007/s10443-011-9207-x
URL : https://hal.archives-ouvertes.fr/hal-00935536

G. Creech and A. Pickett, Meso-modelling of Non-Crimp Fabric composites for coupled drape and failure analysis, Journal of Materials Science, vol.14, issue.6???7, pp.6725-6736, 2006.
DOI : 10.1007/s10853-006-0213-6

J. Lee, S. Hong, W. Yu, and T. Kang, The effect of blank holder force on the stamp forming behaviour of non-crimp fabric with a chain stitch, Compos Sci Technol, vol.67, pp.3-4, 2007.

S. Bel, N. Hamila, P. Boisse, and F. Dumont, Finite element model for NCF composite reinforcement preforming: Importance of inter-ply sliding, Composites Part A: Applied Science and Manufacturing, vol.43, issue.12, pp.2269-2277, 2012.
DOI : 10.1016/j.compositesa.2012.08.005
URL : https://hal.archives-ouvertes.fr/hal-00934514

S. Lomov, M. Barburski, T. Stoilova, I. Verpoest, R. Akkerman et al., Carbon composites based on multiaxial multiply stitched preforms. Part 3: Biaxial tension, picture frame and compression tests of the preforms, Composites Part A: Applied Science and Manufacturing, vol.36, issue.9, pp.1188-1206, 2005.
DOI : 10.1016/j.compositesa.2005.01.015

F. Schirmaier, K. Weidenmann, L. Kaerger, and F. Henning, Characterisation of the draping behaviour of unidirectional non-crimp fabrics (UD-NCF), Composites Part A: Applied Science and Manufacturing, vol.80, pp.28-38, 2015.
DOI : 10.1016/j.compositesa.2015.10.004

P. Boisse, P. Bussy, and P. Ladeveze, A new approach in non-linear mechanics: The large time increment method, International Journal for Numerical Methods in Engineering, vol.15, issue.3, pp.647-663, 1990.
DOI : 10.1002/nme.1620290312

R. Ten-thije and R. Akkerman, Solutions to intra-ply shear locking in finite element analyses of fibre reinforced materials, Composites Part A: Applied Science and Manufacturing, vol.39, issue.7, pp.1167-1176, 2008.
DOI : 10.1016/j.compositesa.2008.03.014

X. Yu, B. Cartwright, D. Mcguckin, L. Ye, and Y. Mai, Intra-ply shear locking in finite element analyses of woven fabric forming processes, Composites Part A: Applied Science and Manufacturing, vol.37, issue.5, pp.790-803, 2006.
DOI : 10.1016/j.compositesa.2005.04.024

N. Hamila and P. Boisse, Locking in simulation of composite reinforcement deformations. Analysis and treatment, Composites Part A: Applied Science and Manufacturing, vol.53, pp.109-117, 2013.
DOI : 10.1016/j.compositesa.2013.06.001
URL : https://hal.archives-ouvertes.fr/hal-00934483

T. Belytschko and W. Bachrach, Efficient implementation of quadrilaterals with high coarse-mesh accuracy, Computer Methods in Applied Mechanics and Engineering, vol.54, issue.3, pp.279-301, 1986.
DOI : 10.1016/0045-7825(86)90107-6

E. Dvorkin and K. Bathe, A continuum mechanics based four???node shell element for general non???linear analysis, Engineering Computations, vol.1, issue.1, pp.77-88, 1984.
DOI : 10.1108/eb023562

T. Belytschko, W. Liu, and B. Moran, Non linear finite elements for continua and structures, 2000.

M. Ferretti, A. Madeo, F. Isola, and P. Boisse, Modeling the onset of shear boundary layers in fibrous composite reinforcements by second-gradient theory, Zeitschrift f??r angewandte Mathematik und Physik, vol.16, issue.3, pp.587-612, 2014.
DOI : 10.1007/s00033-013-0347-8
URL : https://hal.archives-ouvertes.fr/hal-00934569

V. Agostino, I. Giorgio, L. Greco, A. Madeo, and P. Boisse, Continuum and discrete models for structures including (quasi-) inextensible elasticae with a view to the design and modeling of composite reinforcements, International Journal of Solids and Structures, vol.59, pp.1-17, 2015.
DOI : 10.1016/j.ijsolstr.2014.12.014

Y. Aimène, E. Vidal-sallé, B. Hagège, F. Sidoroff, and P. Boisse, A Hyperelastic Approach for Composite Reinforcement Large Deformation Analysis, Journal of Composite Materials, vol.6, issue.3, pp.5-26, 2010.
DOI : 10.1177/0021998309345348

A. Charmetant, J. Orliac, E. Vidal-sallé, and P. Boisse, Hyperelastic model for large deformation analyses of 3D interlock composite preforms, Composites Science and Technology, vol.72, issue.12, pp.1352-1360, 2012.
DOI : 10.1016/j.compscitech.2012.05.006
URL : https://hal.archives-ouvertes.fr/hal-00938544

A. Madeo, M. Ferretti, F. Isola, and P. Boisse, Thick fibrous composite reinforcements behave as special second-gradient materials: three-point bending of 3D interlocks, Zeitschrift f??r angewandte Mathematik und Physik, vol.6, issue.6, pp.2041-2060, 2015.
DOI : 10.1007/s00033-015-0496-z
URL : https://hal.archives-ouvertes.fr/hal-01144230

C. Cazzani, M. Antonio, and E. Turco, Isogeometric analysis: a powerful numerical tool for the elastic analysis of historical masonry arches, Continuum Mechanics and Thermodynamics, vol.77, issue.4, pp.139-156, 2014.
DOI : 10.1007/s00161-014-0409-y

F. Greco and M. Cuomo, An isogeometric implicit G1 mixed finite element for Kirchhoff space rods, Comput Methods Appl Mech Eng, vol.298, issue.1, pp.2016-325, 2015.
URL : https://hal.archives-ouvertes.fr/hal-01254899

S. Mathieu, N. Hamila, F. Bouillon, and P. Boisse, Enhanced modeling of 3D composite preform deformations taking into account local fiber bending stiffness, Composites Science and Technology, vol.117, pp.322-333, 2015.
DOI : 10.1016/j.compscitech.2015.07.005

F. Dell-'isola and D. Steigmann, A two-dimensional gradient-elasticity theory for woven fabrics, J Elast, vol.118, issue.1, pp.113-125, 2015.
URL : https://hal.archives-ouvertes.fr/hal-00997790

D. Steigmann and F. Dell-'isola, Mechanical response of fabric sheets to three-dimensional bending, twisting, and stretching, Acta Mechanica Sinica, vol.52, issue.79, pp.373-382, 2015.
DOI : 10.1007/s10409-015-0413-x
URL : https://hal.archives-ouvertes.fr/hal-01198464

V. Eremeyev and A. Holm, On the direct approach in the theory of second gradient plates, shell and membrane theories in mechanics and biology, pp.147-154, 2015.

A. Madeo, G. Barbagallo, D. Agostino, M. Boisse, and P. , Continuum and discrete models for unbalanced woven fabrics, International Journal of Solids and Structures, vol.94, issue.95, 2016.
DOI : 10.1016/j.ijsolstr.2016.02.005
URL : http://arxiv.org/abs/1509.05012

G. Barbagallo, A. Madeo, and I. Azehaf, Bias extension test on an unbalanced woven composite reinforcement: Experiments and modeling via a second-gradient continuum approach, Journal of Composite Materials, vol.58, issue.2, 2016.
DOI : 10.1016/j.compscitech.2012.05.006

D. Durville, Simulation of the mechanical behaviour of woven fabrics at the scale of fibers, International Journal of Material Forming, vol.49, issue.7???8, pp.1241-1251, 2010.
DOI : 10.1007/s12289-009-0674-7
URL : https://hal.archives-ouvertes.fr/hal-00495110

S. Gatouillat, A. Bareggi, E. Vidal-salle, and P. Boisse, Meso modelling for composite preform shaping ??? Simulation of the loss of cohesion of the woven fibre network, Composites Part A: Applied Science and Manufacturing, vol.54, pp.135-144, 2013.
DOI : 10.1016/j.compositesa.2013.07.010
URL : https://hal.archives-ouvertes.fr/hal-00934559

P. Boisse, A. Gasser, B. Hagege, and J. Billoet, Analysis of the mechanical behavior of woven fibrous material using virtual tests at the unit cell level, Journal of Materials Science, vol.59, issue.4, pp.5955-5962, 2005.
DOI : 10.1007/s10853-005-5069-7

P. Boisse, Finite element analysis of composite forming. composites forming technologies, pp.46-79, 2007.
URL : https://hal.archives-ouvertes.fr/hal-00381252

P. Badel, E. Vidal-salle, and P. Boisse, Large deformation analysis of fibrous materials using rate constitutive equations, Computers & Structures, vol.86, issue.11-12, pp.1164-1175, 2008.
DOI : 10.1016/j.compstruc.2008.01.009
URL : https://hal.archives-ouvertes.fr/hal-00381428

A. Charmetant, E. Vidal-salle, and P. Boisse, Hyperelastic modelling for mesoscopic analyses of composite reinforcements, Composites Science and Technology, vol.71, issue.14, pp.1623-1631, 2011.
DOI : 10.1016/j.compscitech.2011.07.004
URL : https://hal.archives-ouvertes.fr/hal-00938547

E. De-bilbao, D. Soulat, G. Hivet, and A. Gasser, Experimental Study of Bending Behaviour of Reinforcements, Experimental Mechanics, vol.28, issue.5, pp.333-351, 2010.
DOI : 10.1007/s11340-009-9234-9
URL : https://hal.archives-ouvertes.fr/hal-00649570

B. Liang, N. Hamila, M. Peillon, and P. Boisse, Analysis of thermoplastic prepreg bending stiffness during manufacturing and of its influence on wrinkling simulations, Composites Part A: Applied Science and Manufacturing, vol.67, pp.111-122, 2014.
DOI : 10.1016/j.compositesa.2014.08.020

E. Syerko, S. Comas-cardona, and C. Binetruy, Models for shear properties/behavior of dry fibrous materials at various scales: a review, International Journal of Material Forming, vol.3, issue.2???3, pp.1-23, 2015.
DOI : 10.1007/s12289-013-1138-7
URL : https://hal.archives-ouvertes.fr/hal-01007087