K. Agrawal, P. Loezos, M. Syamlal, and S. Sundaresan, The role of meso-scale structures in rapid gas???solid flows, Journal of Fluid Mechanics, vol.445, pp.151-185, 2001.
DOI : 10.1017/S0022112001005663

G. Balzer, Gas???solid flow modelling based on the kinetic theory of granular media: validation, applications and limitations, Powder Technology, vol.113, issue.3, pp.299-309, 2000.
DOI : 10.1016/S0032-5910(00)00313-2

G. Balzer, A. Boëlle, and O. Simonin, Eulerian gas-solid flow modeling of dense fluidized bed, FLUIDIZATION VII, Proceedings of the International Symposium of the Engineering Foundation, pp.1125-1134, 1995.

S. Benyahia, M. Syamlal, and T. J. O-'brien, Evaluation of boundary conditions used to model dilute, turbulent gas/solids flows in a pipe, Powder Technology, vol.156, issue.2-3, pp.62-72, 2005.
DOI : 10.1016/j.powtec.2005.04.002

A. Boëlle, G. Balzer, and O. Simonin, Second-order prediction of the particlephase stress tensor of inelastic spheres in simple shear dense suspensions, In: Gas-Particle Flows. ASME FED, vol.228, pp.9-18, 1995.

J. Capecelatro and O. Desjardins, An Euler???Lagrange strategy for simulating particle-laden flows, Journal of Computational Physics, vol.238, pp.1-31, 2013.
DOI : 10.1016/j.jcp.2012.12.015

C. Cercignani, Theory and Application of the Boltzmann Equation, 1975.

N. G. Deen, M. Van-sint-annaland, M. A. Der-hoef, and J. A. Kuipers, Review of discrete particle modeling of fluidized beds, Chemical Engineering Science, vol.62, issue.1-2, pp.1-2, 2007.
DOI : 10.1016/j.ces.2006.08.014

D. Renzo, A. , D. Maio, and F. P. , Homogeneous and bubbling fluidization regimes in DEM???CFD simulations: Hydrodynamic stability of gas and liquid fluidized beds, Chemical Engineering Science, vol.62, issue.1-2, pp.116-130, 2007.
DOI : 10.1016/j.ces.2006.08.009

S. Ergun, Fluid flow through packed columns, Chem. Eng. Prog, vol.48, pp.89-94, 1952.

P. Fede, G. Moula, A. Ingram, T. Dumas, and O. Simonin, 3D Numerical Simulation and PEPT Experimental Investigation of Pressurized Gas-Solid Fluidized Bed Hydrodynamic, Volume 1: Symposia, Parts A, B and C, pp.1833-1842, 2005.
DOI : 10.1115/FEDSM2009-78048

P. Fede, H. Neau, O. Simonin, and I. Ghouila, 3D unsteady numerical simulation of the hydrodynamic of a gas phase polymerization pilot reactor, Proceedings of the 7th International Conference on Multiphase Flow, 2010.

P. Fede, O. Simonin, R. Ansart, H. Neau, and I. Ghouila, Effect of wall boundary conditions and mesh refinement on numerical simulation of pressurized dense fluidized bed for polymerization reactor, Proceedings of the International Conference on Circulating Fluidized Beds and Fluidization Technology -CFB-10, 2011.

P. Fede, O. Simonin, and I. Ghouila, 3D Numerical Simulation of Polydisperse Pressurized Gas-Solid Fluidized Bed, ASME-JSME-KSME 2011 Joint Fluids Engineering Conference: Volume 1, Symposia ??? Parts A, B, C, and D, pp.3199-3210, 2011.
DOI : 10.1115/AJK2011-12016

G. Ferschneider and P. Mège, Dilute gas???solid flow in a riser, Chemical Engineering Journal, vol.87, issue.1, pp.41-48, 2002.
DOI : 10.1016/S1385-8947(01)00207-8

S. F. Foerster, M. Y. Louge, H. Chang, and K. Allia, Measurements of the collision properties of small spheres, Physics of Fluids, vol.6, issue.3, pp.1108-1115, 1994.
DOI : 10.1063/1.868282

D. Gidaspow, Multiphase Flow and Fluidization: Continuum and Kinetic Theory Descriptions, 1994.

A. Gobin, H. Neau, O. Simonin, J. R. Llinas, V. Reiling et al., Fluid dynamic numerical simulation of a gas phase polymerization reactor, International Journal for Numerical Methods in Fluids, vol.22, issue.4, pp.1199-1220, 2003.
DOI : 10.1002/fld.542

M. Goldschmidt, J. Kuipers, and W. Van-swaaij, Hydrodynamic modelling of dense gas-fluidised beds using the kinetic theory of granular flow: effect of coefficient of restitution on bed dynamics, Chemical Engineering Science, vol.56, issue.2, pp.571-578, 2001.
DOI : 10.1016/S0009-2509(00)00262-1

J. He and O. Simonin, Non-equilibrium prediction of the particle-phase stress tensor in vertical pneumatic conveying. In: Gas-Solid Flows, ASME-FED, vol.166, pp.253-263, 1993.

G. J. Heynderickx, A. K. Das, J. D. Wilde, and G. B. Marin, Effect of Clustering on Gas???Solid Drag in Dilute Two-Phase Flow, Industrial & Engineering Chemistry Research, vol.43, issue.16, pp.4635-4646, 2004.
DOI : 10.1021/ie034122m

K. Hui, P. K. Haff, J. E. Ungar, and R. Jackson, Boundary conditions for high-shear grain flows, Journal of Fluid Mechanics, vol.108, issue.-1, pp.223-233, 1984.
DOI : 10.1007/BF01590859

Y. Igci, I. Andrews, A. T. Sundaresan, S. Pannala, S. Obrien et al., Filtered two-fluid models for fluidized gas-particle suspensions, AIChE Journal, vol.32, issue.6, pp.1431-1448, 2008.
DOI : 10.1002/aic.11481

A. Ingram, M. Haussard, X. Fan, D. J. Parker, J. P. Seville et al., Portable positron emission particle tracking (PEPT) for industrial scale use, Proceedings of the 12th International Conference on Fluidisation -New Horizons in Fluidization Engineering. No. 60, 2007.

A. Ingram, Z. Yang, S. Bakalis, D. Parker, X. Fan et al., Multiple particle tracking in a fluidised bed, Proceedings of the 12th International Conference on Fluidisation -New Horizons in Fluidization Engineering, 2007.

J. Jenkins, Boundary Conditions for Rapid Granular Flow: Flat, Frictional Walls, Journal of Applied Mechanics, vol.59, issue.1, pp.120-135, 1992.
DOI : 10.1115/1.2899416

J. T. Jenkins and M. Y. Louge, On the flux of fluctuation energy in a collisional grain flow at a flat, frictional wall, Physics of Fluids, vol.9, issue.10, pp.2835-2840, 1997.
DOI : 10.1063/1.869396

J. T. Jenkins and M. W. Richman, Boundary conditions for plane flows of smooth, nearly elastic, circular disks, Journal of Fluid Mechanics, vol.164, issue.-1, pp.53-69, 1986.
DOI : 10.1017/S0022112083003419__S0022112083003419

P. C. Johnson and R. Jackson, Frictional???collisional constitutive relations for granular materials, with application to plane shearing, Journal of Fluid Mechanics, vol.26, issue.-1, pp.67-93, 1987.
DOI : 10.1017/S0022112084002883

Y. Kaneko, T. Shiojima, and M. Horio, DEM simulation of fluidized beds for gas-phase olefin polymerization, Chemical Engineering Science, vol.54, issue.24, pp.5809-5821, 1999.
DOI : 10.1016/S0009-2509(99)00153-0

N. A. Konan, S. Lain, O. Simonin, and M. Sommerfeld, Comparison Between Euler-Euler and Euler-Lagrange Computations of Gas-Solid Turbulent Flow in a Horizontal Channel With Different Wall Roughness, Volume 1: Symposia, Parts A and B, pp.2006-98263, 2006.
DOI : 10.1115/FEDSM2006-98263

N. A. Konan, O. Simonin, and K. Squires, Rough Wall Boundary Condition Derivation for Particle Continuum Equations: Validation From LES/DPS of Gas-Solid Turbulent Channel Flow, Volume 1: Symposia, Parts A and B, pp.2006-98267, 2006.
DOI : 10.1115/FEDSM2006-98267

T. Li, J. Grace, and X. Bi, Study of wall boundary condition in numerical simulations of bubbling fluidized beds, Powder Technology, vol.203, issue.3, pp.447-457, 2010.
DOI : 10.1016/j.powtec.2010.06.005

J. M. Link, N. G. Deen, J. A. Kuipers, X. Fan, A. Ingram et al., PEPT and discrete particle simulation study of spout-fluid bed regimes, AIChE Journal, vol.33, issue.5, pp.1189-1202, 2008.
DOI : 10.1002/aic.11456

M. Y. Louge, Computer simulations of rapid granular flows of spheres interacting with a flat, frictional boundary, Physics of Fluids, vol.6, issue.7, pp.2253-2269, 1994.
DOI : 10.1063/1.868178

C. Lun and S. Savage, The effetcs of an impact velocity dependent coefficient of restitution on stresses developed by sheared granular materials, Mech, vol.63, pp.539-559, 1986.

S. Morioka and T. Nakajima, Modeling of gas and solid particles 2-phase flow and application to fluidized-bed, J. Méc. Théor. Appl, vol.6, issue.1, pp.77-88, 1987.

H. Neau, P. Fede, J. Laviéville, and O. Simonin, High performance computing (HPC) for the fluidization of particle -laden reactive flows, Proceedings of The 14th International Conference on Fluidization -From Fundamentals to Products, 2013.

H. Neau, J. Laviéville, and O. Simonin, NEPTUNE_CFD high parallel computing performances for particle-laden reactive flows, Proceedings of the 7th International Conference on Multiphase Flow, 2010.

O. Olaofe, A. Patil, N. Deen, M. Van-der-hoef, and J. Kuipers, Simulation of particle mixing and segregation in bidisperse gas fluidized beds, Chemical Engineering Science, vol.108, pp.258-269, 2014.
DOI : 10.1016/j.ces.2014.01.009

A. Ozel, P. Fede, and O. Simonin, Development of filtered Euler???Euler two-phase model for circulating fluidised bed: High resolution simulation, formulation and a priori analyses, International Journal of Multiphase Flow, vol.55, pp.43-63, 2013.
DOI : 10.1016/j.ijmultiphaseflow.2013.04.002

J. Parmentier, O. Simonin, and O. Delsart, A numerical study of fluidization behavior of Geldart B, A/B and A particles using an Eulerian multifluid modeling approach, Proc. of the 9th Int. Conference on Circulating Fluidized Beds. Circulating Fluidized Bed Technology IX, pp.331-336, 2008.

J. Parmentier, O. Simonin, and O. Delsart, A functional subgrid drift velocity model for filtered drag prediction in dense fluidized bed, AIChE Journal, vol.91, issue.4, pp.1084-1098, 2012.
DOI : 10.1002/aic.12647

C. Rogers and J. Eaton, The behavior of solid particles in a vertical turbulent boundary layer in air, International Journal of Multiphase Flow, vol.16, issue.5, pp.819-834, 1990.
DOI : 10.1016/0301-9322(90)90006-5

R. Rokkam, A. Sowinski, R. Fox, P. Mehrani, and M. Muhle, Computational and experimental study of electrostatics in gas???solid polymerization fluidized beds, Chemical Engineering Science, vol.92, pp.146-156, 2013.
DOI : 10.1016/j.ces.2013.01.023

R. G. Rokkam, R. O. Fox, and M. E. Muhle, Computational fluid dynamics and electrostatic modeling of polymerization fluidized-bed reactors, Powder Technology, vol.203, issue.2, pp.109-124, 2010.
DOI : 10.1016/j.powtec.2010.04.002

M. Sakiz and O. Simonin, Development and validation of continuum particle wall boundary conditions using Lagrangian simulation of a vertical gas-solid channel flow, Proceedings of the ASME Fluids Engineering Division Summer Meeting, pp.99-7898, 1999.

S. Schneiderbauer, D. Schellander, A. Lderer, and S. Pirker, Non-steady state boundary conditions for collisional granular flows at flat frictional moving walls, International Journal of Multiphase Flow, vol.43, pp.149-156, 2012.
DOI : 10.1016/j.ijmultiphaseflow.2012.03.006

A. Soleimani, S. Pirker, and S. Schneiderbauer, Solid boundary condition for collisional gas???solid flows at rough walls, Powder Technology, vol.281, pp.28-33, 2015.
DOI : 10.1016/j.powtec.2015.04.067

M. Sommerfeld and N. Huber, Experimental analysis and modelling of particle-wall collisions, International Journal of Multiphase Flow, vol.25, issue.6-7, pp.1457-1489, 1999.
DOI : 10.1016/S0301-9322(99)00047-6

C. Stellema, J. Vlek, R. Mudde, J. De-goeij, and C. Van-den-bleek, Development of an improved positron emission particle tracking system, Nuclear Instruments and Methods in Physics Research Section A: Accelerators, Spectrometers, Detectors and Associated Equipment, vol.404, issue.2-3, pp.334-348, 1998.
DOI : 10.1016/S0168-9002(97)01194-7

S. Sundaresan, S. Radl, C. C. Milioli, and F. E. Milioli, Coarse-grained models for momentum, energy and species transport in gas-particle flows, Proceedings of the Series The 14th International Conference on Fluidization - From Fundamentals to Products, 2013.

Y. Wen and Y. Yu, Mechanics of fluidization, Chem. Eng. Symp. Ser. Series, vol.62, pp.100-111, 1965.