R. Batisse, H. D. Fant-jaeckels, F. Curie, and J. M. Virely, BIAXIAL HIGH CYCLE FATIGUE TESTS ON A GAS TRANSMISSION PIPELINE STEEL, Fatigue & Fracture of Engineering Materials and Structures, vol.853, issue.10, pp.1231-1238, 1996.
DOI : 10.1111/j.1460-2695.1996.tb00946.x

M. Poncelet, G. Barbier, B. Raka, S. Courtin, R. Desmorat et al., Biaxial High Cycle Fatigue of a type 304L stainless steel: Cyclic strains and crack initiation detection by digital image correlation, European Journal of Mechanics - A/Solids, vol.29, issue.5, pp.810-825, 2010.
DOI : 10.1016/j.euromechsol.2010.05.002
URL : https://hal.archives-ouvertes.fr/hal-00659528

F. Fremy, S. Pommier, M. Poncelet, B. Raka, E. Galenne et al., Load path effect on fatigue crack propagation in I+II+III mixed mode conditions ??? Part 1: Experimental investigations, International Journal of Fatigue, vol.62, issue.0, pp.104-112, 2014.
DOI : 10.1016/j.ijfatigue.2013.06.002

D. Lecompte, A. Smits, H. Sol, J. Vantomme, and D. Van-hemelrijck, Mixed numerical-experimental technique for orthotropic parameter identication using biaxial tensile tests on cruciform specimens, International Journal of Solids and Structures, vol.44, issue.5, p.16431656, 2007.

S. Avril, M. Bonnet, A. Bretelle, M. Grédiac, F. Hild et al., Overview of identication methods of mechanical parameters based on full-eld measurements, Experimental Mechanics, vol.48, issue.4, p.381402, 2008.

S. Cooreman, D. Lecompte, H. Sol, J. Vantomme, and D. Debruyne, Identication of Mechanical Material Behavior Through Inverse Modeling and DIC, Experimental Mechanics, vol.48, issue.4, p.421433, 2008.

M. Rossi and F. Pierron, Identication of plastic constitutive parameters at large deformations from three dimensional displacement elds, Computational Mechanics, vol.49, issue.1, p.5371, 2012.

J. Réthoré, . Muhibullah, T. Elguedj, M. Coret, P. Chaudet et al., Robust identication of elasto-plastic constitutive law parameters from digital images using 3D kinematics, International Journal of Solids and Structures, vol.50, issue.1, p.7385, 2013.

H. Leclerc, J. Périé, S. Roux, and F. Hild, Integrated digital image correlation for the identication of mechanical properties, pp.161-171, 2009.

F. Hild and S. Roux, Comparison of Local and Global Approaches to Digital Image Correlation, Experimental Mechanics, vol.39, issue.8, pp.1503-1519, 2012.
DOI : 10.1007/s11340-012-9603-7
URL : https://hal.archives-ouvertes.fr/hal-00750756

Z. Tomi£evi¢, J. Kodvanj, and F. Hild, Characterization of nonlinear material behaviour on graphite cast iron via inverse identication methods. Analysis of uniaxial tests, European Journal of Mechanics -A/Solids, 2015.

J. Sermage, J. Lemaitre, and R. Desmorat, Multiaxial creep-fatigue under anisothermal conditions, Fatigue <html_ent glyph="@amp;" ascii="&"/> Fracture of Engineering Materials and Structures, vol.21, issue.3, pp.241-252, 2000.
DOI : 10.1046/j.1460-2695.2000.00267.x

C. Doudard, M. Poncelet, S. Calloch, C. Boue, F. Hild et al., Determination of an HCF criterion by thermal measurements under biaxial cyclic loading, International Journal of Fatigue, vol.29, issue.4, pp.748-757, 2007.
DOI : 10.1016/j.ijfatigue.2006.06.009
URL : https://hal.archives-ouvertes.fr/hal-00322198

J. Lemaitre, J. Sermage, and R. Desmorat, A two scale damage concept applied to fatigue, International Journal of Fracture, vol.97, issue.1/4, pp.67-81, 1999.
DOI : 10.1023/A:1018641414428

Z. Tomi£evi¢, F. Hild, R. , and S. , Mechanics-aided digital image correlation, Journal of Strain Analysis for Engineering Design, vol.48, issue.5, p.330343, 2013.

F. Mathieu, H. Leclerc, F. Hild, R. , and S. , Estimation of Elastoplastic Parameters via Weighted FEMU and Integrated-DIC, Experimental Mechanics, vol.48, issue.2, p.105119, 2015.
DOI : 10.1007/s11340-014-9888-9
URL : https://hal.archives-ouvertes.fr/hal-01166755

P. Ludwik, Elemente der technologischen Mechanik, Verlag von Julius Springer, 1909.
DOI : 10.1007/978-3-662-40293-1

P. Armstrong and C. Frederick, A mathematical representation of the multiaxial bauschinger eect, Report RD Central Electricity Generating Board, vol.731, 1966.

R. Gras, H. Leclerc, F. Hild, S. Roux, and J. Schneider, Identication of a set of macroscopic elastic parameters in a 3D woven composite: Uncertainty analysis and regularization, International Journal of Solids

L. Robert, V. Velay, N. Decultot, R. , and S. , Identication of hardening parameters using nite element models and full-eld measurements: some case studies, The Journal of Strain Analysis for Engineering Design, vol.47, issue.1, p.317, 2012.

W. Prager, A new method of analysing stress and strain in work hardening plastic solids, ASME Journal of Applied Mechanics, vol.78, issue.493, 1956.