T. Jayakumar, M. D. Mathew, and K. Laha, High Temperature Materials for Nuclear Fast Fission and Fusion Reactors and Advanced Fossil Power Plants, Procedia Engineering, vol.55, pp.259-270, 2013.
DOI : 10.1016/j.proeng.2013.03.252

M. Kamaya and M. Itakura, Simulation for intergranular stress corrosion cracking based on a three-dimensional polycrystalline model, Engineering Fracture Mechanics, vol.76, issue.3, pp.386-401, 2009.
DOI : 10.1016/j.engfracmech.2008.11.004

M. D. Mcmurtrey, G. S. Was, L. Patrick, and D. Farkas, Relationship between localized strain and irradiation assisted stress corrosion cracking in an austenitic alloy, Materials Science and Engineering: A, vol.528, issue.10-11, pp.3730-3740, 2011.
DOI : 10.1016/j.msea.2011.01.073

T. Couvant, L. Legras, T. Ghys, P. Gambier, N. Huin et al., Strain Path Effect on IGSCC Initiation and Oxidation of Alloy 182 Exposed to PWR Primary Water, 15th International Conference on Environmental Degradation of Materials in Nuclear Power Systems-Water Reactors, 2011.
DOI : 10.1002/9781118456835.ch163

O. Diard, S. Leclercq, G. Rousselier, and G. Cailletaud, Evaluation of finite element based analysis of 3D multicrystalline aggregates plasticity, International Journal of Plasticity, vol.21, issue.4, pp.691-722, 2005.
DOI : 10.1016/j.ijplas.2004.05.017
URL : https://hal.archives-ouvertes.fr/hal-00165134

A. Musienko and G. Cailletaud, Simulation of inter- and transgranular crack propagation in polycrystalline aggregates due to stress corrosion cracking, Acta Materialia, vol.57, issue.13, pp.3840-3855, 2009.
DOI : 10.1016/j.actamat.2009.04.035
URL : https://hal.archives-ouvertes.fr/hal-00413658

T. R. Bieler, P. Eisenlohr, F. Roters, D. Kumar, D. E. Mason et al., The role of heterogeneous deformation on damage nucleation at grain boundaries in single phase metals, International Journal of Plasticity, vol.25, pp.1655-1683, 2009.

I. Simonovski and L. Cizelj, Cohesive element approach to grain level modelling of intergranular cracking, Engineering Fracture Mechanics, vol.110, pp.364-377, 2013.
DOI : 10.1016/j.engfracmech.2013.05.011

R. A. Lebensohn, R. Brenner, O. Castelnau, and A. D. Rollett, Orientation image-based micromechanical modelling of subgrain texture evolution in polycrystalline copper, Acta Materialia, vol.56, issue.15, pp.3914-3926, 2008.
DOI : 10.1016/j.actamat.2008.04.016

R. A. Lebensohn, A. K. Kanjarla, and P. Eisenlohr, An elasto-viscoplastic formulation based on fast Fourier transforms for the prediction of micromechanical fields in polycrystalline materials, International Journal of Plasticity, vol.32, issue.33, pp.32-3359, 2012.
DOI : 10.1016/j.ijplas.2011.12.005

A. K. Kanjarla, R. A. Lebensohn, L. Balogh, and C. N. Tomé, Study of internal lattice strain distributions in stainless steel using a full-field elasto-viscoplastic formulation based on fast Fourier transforms, Acta Materialia, vol.60, issue.6-7, pp.3094-3106, 2012.
DOI : 10.1016/j.actamat.2012.02.014

R. Brenner and P. Suquet, Overall response of viscoelastic composites and polycrystals: exact asymptotic relations and approximate estimates, International Journal of Solids and Structures, vol.50, issue.10, pp.1824-1838, 2013.
DOI : 10.1016/j.ijsolstr.2013.02.011
URL : https://hal.archives-ouvertes.fr/hal-00788677

P. Eisenlohr, M. Diehl, R. A. Lebensohn, and F. Roters, A spectral method solution to crystal elasto-viscoplasticity at finite strains, International Journal of Plasticity, vol.46, pp.37-53, 2013.
DOI : 10.1016/j.ijplas.2012.09.012

F. Roters, P. Eisenlohr, L. Hantcherli, D. D. Tjahjanto, T. R. Bieler et al., Overview of constitutive laws, kinematics, homogenization and multiscale methods in crystal plasticity finite-element modeling: Theory, experiments, applications, Acta Materialia, vol.58, issue.4, pp.1152-1211, 2010.
DOI : 10.1016/j.actamat.2009.10.058

L. Priester, Dislocation-interface " interaction ? stress accommodation processes at interfaces . Materials Science and Engineering: A, pp.309-310430, 2001.

J. Jiang, T. B. Britton, and A. J. Wilkinson, Measurement of geometrically necessary dislocation density with high resolution electron backscatter diffraction: Effects of detector binning and step size, Ultramicroscopy, vol.125, pp.1-9, 2013.
DOI : 10.1016/j.ultramic.2012.11.003

T. Ohashi, R. I. Barabash, J. W. Pang, G. E. Ice, and O. M. Barabash, X-ray microdiffraction and strain gradient crystal plasticity studies of geometrically necessary dislocations near a Ni bicrystal grain boundary, International Journal of Plasticity, vol.25, issue.5, pp.920-941, 2009.
DOI : 10.1016/j.ijplas.2008.04.009

C. Perrin, S. Berbenni, H. Vehoff, and M. Berveiller, Role of discrete intragranular slip on lattice rotations in polycrystalline Ni: Experimental and micromechanical studies, Acta Materialia, vol.58, issue.14, pp.4639-4649, 2010.
DOI : 10.1016/j.actamat.2010.04.033

N. A. Fleck and J. W. Hutchinson, A phenomenological theory for strain gradient effects in plasticity, Journal of the Mechanics and Physics of Solids, vol.41, issue.12, pp.1825-1857, 1993.
DOI : 10.1016/0022-5096(93)90072-N

H. Gao, Y. Huang, W. D. Nix, and J. W. Hutchinson, Mechanism-based strain gradient plasticity? I. Theory, Journal of the Mechanics and Physics of Solids, vol.47, issue.6, pp.1239-1263, 1999.
DOI : 10.1016/S0022-5096(98)00103-3

Z. Xue, Y. Huang, and M. Li, Particle size effect in metallic materials: a study by the theory of mechanism-based strain gradient plasticity, Acta Materialia, vol.50, issue.1, pp.149-160, 2002.
DOI : 10.1016/S1359-6454(01)00325-1

M. E. Gurtin, A gradient theory of single-crystal viscoplasticity that accounts for geometrically necessary dislocations, Journal of the Mechanics and Physics of Solids, vol.50, issue.1, pp.5-32, 2002.
DOI : 10.1016/S0022-5096(01)00104-1

S. Forest, F. Barbe, and G. Cailletaud, Cosserat modelling of size effects in the mechanical behaviour of polycrystals and multi-phase materials, International Journal of Solids and Structures, vol.37, issue.46-47, pp.7105-7126, 2000.
DOI : 10.1016/S0020-7683(99)00330-3

P. Neff, A finite-strain elastic???plastic Cosserat theory for polycrystals with grain rotations, International Journal of Engineering Science, vol.44, issue.8-9, pp.574-594, 2006.
DOI : 10.1016/j.ijengsci.2006.04.002

B. Klusemann and T. Yalçinkaya, Plastic deformation induced microstructure evolution through gradient enhanced crystal plasticity based on a non-convex Helmholtz energy, International Journal of Plasticity, vol.48, pp.168-188, 2013.
DOI : 10.1016/j.ijplas.2013.02.012

J. R. Mayeur and D. L. Mcdowell, A comparison of Gurtin type and micropolar theories of generalized single crystal plasticity, International Journal of Plasticity, vol.57, pp.29-51, 2014.
DOI : 10.1016/j.ijplas.2014.01.010

M. F. Ashby, The deformation of plastically non-homogeneous materials, Philosophical Magazine, vol.245, issue.170, pp.399-424, 1970.
DOI : 10.1016/0001-6160(64)90034-3

A. Acharya and A. J. Beaudoin, Grain-size effect in viscoplastic polycrystals at moderate strains, Journal of the Mechanics and Physics of Solids, vol.48, issue.10, pp.2213-2230, 2000.
DOI : 10.1016/S0022-5096(00)00013-2

A. J. Beaudoin, A. Acharya, S. R. Chen, D. A. Korzekwa, and M. G. Stout, Consideration of grain-size effect and kinetics in the plastic deformation of metal polycrystals, Acta Materialia, vol.48, issue.13, pp.3409-3423, 2000.
DOI : 10.1016/S1359-6454(00)00136-1

M. G. Geers, W. A. Brekelmans, and P. J. Janssen, Size effects in miniaturized polycrystalline FCC samples: Strengthening versus weakening, International Journal of Solids and Structures, vol.43, issue.24, pp.7304-7321, 2006.
DOI : 10.1016/j.ijsolstr.2006.05.009

A. G. Evans and J. W. Hutchinson, A critical assessment of theories of strain gradient plasticity, Acta Materialia, vol.57, issue.5, pp.1675-1688, 2009.
DOI : 10.1016/j.actamat.2008.12.012

C. Keller, E. Hug, A. M. Habraken, and L. Duchene, Finite element analysis of the free surface effects on the mechanical behavior of thin nickel polycrystals, International Journal of Plasticity, vol.29, pp.155-172, 2012.
DOI : 10.1016/j.ijplas.2011.08.007

B. W. Baker, T. R. Mcnelley, and L. N. Brewer, Grain size and particle dispersion effects on the tensile behavior of friction stir welded MA956 oxide dispersion strengthened steel from low to elevated temperatures, Materials Science and Engineering: A, vol.589, pp.217-227, 2014.
DOI : 10.1016/j.msea.2013.09.092

N. M. Cordero, S. Forest, E. P. Busso, S. Berbenni, and M. Cherkaoui, Grain size effects on plastic strain and dislocation density tensor fields in metal polycrystals, Computational Materials Science, vol.52, issue.1, pp.7-13, 2012.
DOI : 10.1016/j.commatsci.2011.02.043
URL : https://hal.archives-ouvertes.fr/hal-00658644

K. S. Cheong, E. P. Busso, and A. Arsenlis, A study of microstructural length scale effects on the behaviour of FCC polycrystals using strain gradient concepts, International Journal of Plasticity, vol.21, issue.9, pp.1797-1814, 2005.
DOI : 10.1016/j.ijplas.2004.11.001

V. Taupin, S. Berbenni, C. Fressengeas, and O. Bouaziz, On particle size effects: An internal length mean field approach using field dislocation mechanics, Acta Materialia, vol.58, issue.16, pp.5532-5544, 2010.
DOI : 10.1016/j.actamat.2010.06.034

V. Taupin, S. Berbenni, and C. Fressengeas, Size effects on the hardening of channel-type microstructures: A field dislocation mechanics-based approach, Acta Materialia, vol.60, issue.2, pp.664-673, 2012.
DOI : 10.1016/j.actamat.2011.10.033

H. Chang, A. Gaubert, M. Fivel, S. Berbenni, O. Bouaziz et al., Analysis of particle induced dislocation structures using three-dimensional dislocation dynamics and strain gradient plasticity, Computational Materials Science, vol.52, issue.1, pp.33-39
DOI : 10.1016/j.commatsci.2011.02.014
URL : https://hal.archives-ouvertes.fr/hal-00662343

E. Héripré, M. Dexet, J. Crépin, L. Gélébart, A. Roos et al., Coupling between experimental measurements and polycrystal finite element calculations for micromechanical study of metallic materials, International Journal of Plasticity, vol.23, issue.9, pp.1512-1539, 2007.
DOI : 10.1016/j.ijplas.2007.01.009

A. Ma, F. Roters, and D. Raabe, On the consideration of interactions between dislocations and grain boundaries in crystal plasticity finite element modeling ??? Theory, experiments, and simulations, Acta Materialia, vol.54, issue.8, pp.2181-2194, 2006.
DOI : 10.1016/j.actamat.2006.01.004

A. Ma, F. Roters, and D. Raabe, Studying the effect of grain boundaries in dislocation density based crystal-plasticity finite element simulations, International Journal of Solids and Structures, vol.43, issue.24, pp.7287-7303, 2006.
DOI : 10.1016/j.ijsolstr.2006.07.006

E. Soppa, P. Doumalin, P. Binkele, T. Wiesendanger, M. Bornert et al., Experimental and numerical characterisation of in-plane deformation in two-phase materials, Computational Materials Science, vol.21, issue.3, pp.261-275, 2001.
DOI : 10.1016/S0927-0256(01)00170-7
URL : https://hal.archives-ouvertes.fr/hal-00111335

M. A. Sutton, N. Li, D. C. Joy, A. P. Reynolds, and X. Li, Scanning Electron Microscopy for Quantitative Small and Large Deformation Measurements Part I: SEM Imaging at Magnifications from 200 to 10,000, Experimental Mechanics, vol.17, issue.6, pp.775-787, 2007.
DOI : 10.1007/s11340-007-9042-z

M. A. Sutton, N. Li, D. Garcia, N. Cornille, J. Orteu et al., Scanning Electron Microscopy for Quantitative Small and Large Deformation Measurements Part II: Experimental Validation for Magnifications from 200 to 10,000, Experimental Mechanics, vol.15, issue.4, pp.789-804, 2007.
DOI : 10.1007/s11340-007-9041-0

M. A. Tschopp, B. B. Bartha, W. J. Porter, P. T. Murray, and S. B. Fairchild, Microstructure-Dependent Local Strain Behavior in Polycrystals through In-Situ Scanning Electron Microscope Tensile Experiments, Metallurgical and Materials Transactions A, vol.51, issue.389, pp.2363-2368, 2009.
DOI : 10.1007/s11661-009-9938-6

A. D. Kammers and S. Daly, Digital Image Correlation under Scanning Electron Microscopy: Methodology and Validation, Experimental Mechanics, vol.39, issue.9, pp.1746-1761, 2013.
DOI : 10.1007/s11340-013-9782-x

W. Z. Abuzaid, M. D. Sangid, J. D. Carroll, H. Sehitoglu, and J. Lambros, Slip transfer and plastic strain accumulation across grain boundaries in Hastelloy X, Journal of the Mechanics and Physics of Solids, vol.60, issue.6, pp.1201-1220, 2012.
DOI : 10.1016/j.jmps.2012.02.001

J. L. Carter, M. W. Kuper, M. D. Uchic, and M. J. Mills, Characterization of localized deformation near grain boundaries of superalloy Ren??-104 at elevated temperature, Materials Science and Engineering: A, vol.605, pp.127-136, 2014.
DOI : 10.1016/j.msea.2014.03.048

H. Jin, W. Lu, and J. Korellis, Micro-scale deformation measurement using the digital image correlation technique and scanning electron microscope imaging, The Journal of Strain Analysis for Engineering Design, vol.43, issue.8, pp.719-728, 2008.
DOI : 10.1243/03093247JSA412

H. Jin, W. Lu, S. Haldar, and H. A. Bruck, Microscale characterization of granular deformation near a crack tip, Journal of Materials Science, vol.15, issue.3, pp.6596-6602, 2011.
DOI : 10.1007/s10853-011-5608-3

S. R. Mcneill, W. H. Peters, and M. A. Sutton, Estimation of stress intensity factor by digital image correlation, Engineering Fracture Mechanics, vol.28, issue.1, pp.101-112, 1987.
DOI : 10.1016/0013-7944(87)90124-X

J. D. Carroll, W. Abuzaid, J. Lambros, and H. Sehitoglu, High resolution digital image correlation measurements of strain accumulation in fatigue crack growth, International Journal of Fatigue, vol.57, pp.140-150, 2013.
DOI : 10.1016/j.ijfatigue.2012.06.010

C. C. Tasan, M. Diehl, D. Yan, C. Zambaldi, P. Shanthraj et al., Integrated experimental???simulation analysis of stress and strain partitioning in multiphase alloys, Acta Materialia, vol.81, pp.386-400, 2014.
DOI : 10.1016/j.actamat.2014.07.071

G. Martin, C. W. Sinclair, and R. A. Lebensohn, Microscale plastic strain heterogeneity in slip dominated deformation of magnesium alloy containing rare earth, Materials Science and Engineering: A, vol.603, pp.37-51, 2014.
DOI : 10.1016/j.msea.2014.01.102
URL : https://hal.archives-ouvertes.fr/hal-01053442

C. C. Tasan, J. P. Hoefnagels, M. Diehl, D. Yan, F. Roters et al., Strain localization and damage in dual phase steels investigated by coupled in-situ deformation experiments and crystal plasticity simulations, International Journal of Plasticity, vol.63, pp.198-210, 2014.
DOI : 10.1016/j.ijplas.2014.06.004

H. Lim, J. D. Carroll, C. C. Battaile, T. E. Buchheit, B. L. Boyce et al., Grain-scale experimental validation of crystal plasticity finite element simulations of tantalum oligocrystals, International Journal of Plasticity, vol.60, pp.1-18, 2014.
DOI : 10.1016/j.ijplas.2014.05.004

H. Lim, J. D. Carroll, C. C. Battaile, B. L. Boyce, and C. R. Weinberger, Quantitative comparison between experimental measurements and CP-FEM predictions of plastic deformation in a tantalum oligocrystal, International Journal of Mechanical Sciences, vol.92, pp.98-108, 2015.
DOI : 10.1016/j.ijmecsci.2014.12.010

J. D. Carroll, B. G. Clark, T. E. Buchheit, B. L. Boyce, and C. R. Weinberger, An experimental statistical analysis of stress projection factors in BCC tantalum, Materials Science and Engineering: A, vol.581, pp.108-118, 2013.
DOI : 10.1016/j.msea.2013.05.085

H. Li, D. E. Mason, T. R. Bieler, C. J. Boehlert, and M. A. Crimp, Methodology for estimating the critical resolved shear stress ratios of ??-phase Ti using EBSD-based trace analysis, Acta Materialia, vol.61, issue.20, pp.7555-7567, 2013.
DOI : 10.1016/j.actamat.2013.08.042

A. Zeghadi, F. N-'guyen, S. Forest, A. Gourgues, and O. Bouaziz, Ensemble averaging stress???strain fields in polycrystalline aggregates with a constrained surface microstructure?????????Part 1: anisotropic elastic behaviour, Philosophical Magazine, vol.17, issue.8-9, pp.1401-1424, 2007.
DOI : 10.1016/S1359-6462(02)00199-9
URL : https://hal.archives-ouvertes.fr/hal-00513781

A. Zeghadi, S. Forest, A. Gourgues, and O. Bouaziz, Ensemble averaging stress???strain fields in polycrystalline aggregates with a constrained surface microstructure?????????Part 2: crystal plasticity, Philosophical Magazine, vol.50, issue.8-9, pp.1425-1446, 2007.
DOI : 10.1016/0020-7225(81)90120-8
URL : https://hal.archives-ouvertes.fr/hal-00513782

M. Montagnat, O. Castelnau, P. D. Bons, S. H. Faria, O. Gagliardini et al., Multiscale modeling of ice deformation behavior, Journal of Structural Geology, vol.61, pp.78-108, 2014.
DOI : 10.1016/j.jsg.2013.05.002
URL : https://hal.archives-ouvertes.fr/hal-00904919

J. Schwartz, O. Fandeur, and C. Rey, Fatigue crack initiation modeling of 316LN steel based on non local plasticity theory, Procedia Engineering, vol.2, issue.1, pp.1353-1362, 2010.
DOI : 10.1016/j.proeng.2010.03.147
URL : https://hal.archives-ouvertes.fr/hal-00752010

G. V. Prasad-reddy, C. Robertson, C. Déprés, and M. Fivel, Effect of grain disorientation on early fatigue crack propagation in face-centred-cubic polycrystals: A three-dimensional dislocation dynamics investigation, Acta Materialia, vol.61, issue.14, pp.5300-5310, 2013.
DOI : 10.1016/j.actamat.2013.05.021

A. Guery, F. Latourte, F. Hild, and S. Roux, Characterization of SEM speckle pattern marking and imaging distortion by digital image correlation, Measurement Science and Technology, vol.25, issue.1, p.12, 2014.
DOI : 10.1088/0957-0233/25/1/015401
URL : https://hal.archives-ouvertes.fr/hal-00947399

H. Leclerc, J. N. Périé, S. Roux, and F. Hild, Integrated Digital Image Correlation for the Identification of Mechanical Properties, LNCS, vol.44, issue.13, pp.161-171, 2009.
DOI : 10.1016/j.ijsolstr.2006.11.024

Z. Tomi?-cevi´ccevi´c, F. Hild, and S. Roux, Mechanics-aided digital image correlation, Journal of Strain Anal. Eng. Des, vol.48, pp.330-343, 2013.

G. Besnard, F. Hild, and S. Roux, ???Finite-Element??? Displacement Fields Analysis from Digital Images: Application to Portevin???Le Ch??telier Bands, Experimental Mechanics, vol.404, issue.3, pp.789-803, 2006.
DOI : 10.1007/s11340-006-9824-8

J. Réthoré, F. Hild, and S. Roux, Shear-band capturing using a multiscale extended digital image correlation technique, Computer Methods in Applied Mechanics and Engineering, vol.196, issue.49-52, pp.5016-5030, 2007.
DOI : 10.1016/j.cma.2007.06.019

J. Réthoré, G. Besnard, G. Vivier, F. Hild, and S. Roux, Experimental investigation of localized phenomena using digital image correlation, Philosophical Magazine, vol.364, issue.28-29, pp.3339-3355, 2008.
DOI : 10.1002/nme.849

A. N. Tikhonov and V. Y. Arsenin, Solutions of ill-posed problems, 1977.

S. Roux, F. Hild, and H. Leclerc, Mechanical Assistance to DIC, Procedia IUTAM, vol.4, pp.159-168, 2012.
DOI : 10.1016/j.piutam.2012.05.018

K. Kunze, S. I. Wright, B. L. Adams, and D. J. Dingley, Advances in Automatic EBSP Single Orientation Measurements, Textures and Microstructures, vol.20, issue.1-4, pp.41-54, 1993.
DOI : 10.1155/TSM.20.41

G. Nolze, Image distortions in SEM and their influences on EBSD measurements, Ultramicroscopy, vol.107, issue.2-3, pp.172-183, 2007.
DOI : 10.1016/j.ultramic.2006.07.003

N. J. Petch, The cleavage strength of polycrystals, Journal of the Iron and Steel Institute, vol.174, pp.25-28, 1953.

L. Méric, P. Poubanne, and G. Cailletaud, Single Crystal Modeling for Structural Calculations: Part 1???Model Presentation, Journal of Engineering Materials and Technology, vol.113, issue.1, pp.162-170, 1991.
DOI : 10.1115/1.2903374

M. Berveiller and A. Zaoui, An extension of the self-consistent scheme to plastically-flowing polycrystals, Journal of the Mechanics and Physics of Solids, vol.26, issue.5-6, pp.325-344, 1979.
DOI : 10.1016/0022-5096(78)90003-0

Y. Guilhem, S. Basseville, F. Curtit, J. Stéphan, and G. Cailletaud, Investigation of the effect of grain clusters on fatigue crack initiation in polycrystals, International Journal of Fatigue, vol.32, issue.11, pp.1748-1763, 2010.
DOI : 10.1016/j.ijfatigue.2010.04.003
URL : https://hal.archives-ouvertes.fr/hal-00509802

C. Zhang, H. Li, P. Eisenlohr, W. Liu, C. J. Boehlert et al., Effect of realistic 3D microstructure in crystal plasticity finite element analysis of polycrystalline Ti-5Al-2.5Sn, International Journal of Plasticity, vol.69, pp.21-35, 2015.
DOI : 10.1016/j.ijplas.2015.01.003

P. Villechaise, L. Sabatier, and J. C. Girard, On slip band features and crack initiation in fatigued 316L austenitic stainless steel: Part 1: Analysis by electron back-scattered diffraction and atomic force microscopy, Materials Science and Engineering: A, vol.323, issue.1-2, pp.377-385, 2002.
DOI : 10.1016/S0921-5093(01)01381-8

J. Miao, T. M. Pollock, and J. W. Jones, Crystallographic fatigue crack initiation in nickel-based superalloy Ren?? 88DT at elevated temperature, Acta Materialia, vol.57, issue.20, pp.5964-5974, 2009.
DOI : 10.1016/j.actamat.2009.08.022

B. Klusemann, B. Svendsen, and H. Vehoff, Modeling and simulation of deformation behavior, orientation gradient development and heterogeneous hardening in thin sheets with coarse texture, International Journal of Plasticity, vol.50, pp.109-126, 2013.
DOI : 10.1016/j.ijplas.2013.04.004

F. Latourte, N. Rupin, M. He, A. Parrot, and S. Leclercq, Full Field Measurements used for Assessing Industrial Issues-Two Examples, Procedia IUTAM, vol.4, pp.92-105, 2012.
DOI : 10.1016/j.piutam.2012.05.011

Y. Yang, L. Wang, T. R. Bieler, P. Eisenlohr, and M. A. Crimp, Quantitative Atomic Force Microscopy Characterization and Crystal Plasticity Finite Element Modeling of Heterogeneous Deformation in Commercial Purity Titanium, Metallurgical and Materials Transactions A, vol.55, issue.2, pp.636-644, 2011.
DOI : 10.1007/s11661-010-0475-0

N. Lahellec and P. Suquet, Effective response and field statistics in elasto-plastic and elasto-viscoplastic composites under radial and non-radial loadings, International Journal of Plasticity, vol.42, pp.1-30, 2013.
DOI : 10.1016/j.ijplas.2012.09.005
URL : https://hal.archives-ouvertes.fr/hal-00753819

Y. Liu and P. P. Castañeda, Second-order theory for the effective behavior and field fluctuations in viscoplastic polycrystals, Journal of the Mechanics and Physics of Solids, vol.52, issue.2, pp.467-495, 2004.
DOI : 10.1016/S0022-5096(03)00078-4

D. D. Tjahjanto, P. Eisenlohr, and F. Roters, A novel grain cluster-based homogenization scheme, Modelling and Simulation in Materials Science and Engineering, vol.18, issue.1, p.21, 2010.
DOI : 10.1088/0965-0393/18/1/015006

J. Schwartz, O. Fandeur, and C. Rey, Numerical approach of cyclic behaviour of 316LN stainless steel based on a polycrystal modelling including strain gradients, International Journal of Fatigue, vol.55, pp.202-212, 2013.
DOI : 10.1016/j.ijfatigue.2013.07.003

A. King, G. Johnson, D. Engelberg, W. Ludwig, and J. Marrow, Observations of Intergranular Stress Corrosion Cracking in a Grain-Mapped Polycrystal, Science, vol.321, issue.5887, pp.382-385, 2008.
DOI : 10.1126/science.1156211

T. Mayama, T. Ohashi, and R. Kondou, Geometrically necessary dislocation structure organization in FCC bicrystal subjected to cyclic plasticity, International Journal of Plasticity, vol.25, issue.11, pp.2122-2140, 2009.
DOI : 10.1016/j.ijplas.2009.02.001