M. K. Agoston, Computer Graphics & Geometric Modeling, 2004.

C. Barghiel, R. Bartels, and D. Forsey, Pasting Spline Surfaces, Mathematical Methods for Curves and Surfaces, pp.31-40, 1999.

R. Bartels and J. Beatty, A Technique for the Direct Manipulation of Spline Curves. Graphics Interface '89, pp.33-39, 1989.

H. Biermann, D. Kristjansson, and D. Zorin, Approximate Boolean operations on free-form solids, Proceedings of the 28th annual conference on Computer graphics and interactive techniques , SIGGRAPH '01, pp.185-194, 2001.
DOI : 10.1145/383259.383280
URL : http://citeseerx.ist.psu.edu/viewdoc/summary?doi=10.1.1.9.9989

H. Biermann, I. Martin, F. Bernardini, and D. Zorin, Cut-and-paste editing of multiresolution surfaces, Proceedings SIGGRAPH '02, pp.312-321, 2002.

H. Biermann, I. M. Martin, D. Zorin, and F. Bernardini, Sharp Features on Multiresolution Subdivision Surfaces, Graphical Models, vol.64, issue.2, pp.61-77, 2002.
DOI : 10.1006/gmod.2002.0570
URL : http://citeseerx.ist.psu.edu/viewdoc/summary?doi=10.1.1.91.8675

J. Bloomenthal, Introduction to Implicit Surfaces, 1997.

G. P. Bonneau and H. Hagen, Variational Design of Rational Bézier Curves and Surfaces, Curves and Surfaces in Geometric Design, pp.51-58, 1994.

P. Borel and A. Rappoport, Simple constrained deformations for geometric modeling and interactive design, ACM Transactions on Graphics, vol.13, issue.2, pp.137-155, 1994.
DOI : 10.1145/176579.176581

S. Capell, S. Green, B. Curless, T. Duchamp, and Z. Popovic, A multiresolution framework for dynamic deformations, Proceedings of the 2002 ACM SIGGRAPH/Eurographics symposium on Computer animation , SCA '02, pp.41-48, 2002.
DOI : 10.1145/545261.545268

J. C. Cavendish and S. P. Marin, Chapter 8: A Procedural Feature-Based Approach for Designing Functional Surfaces, Topics in Surface Modeling. SIAM, 1992.
DOI : 10.1137/1.9781611971644.ch8

G. Celniker and D. Gossard, Deformable Curve and Surface Finite-elements for Free-form Shape Design Computer Graphics (SIGGRAPH '91 proceedings), pp.257-266, 1991.
DOI : 10.1145/122718.122746
URL : http://citeseerx.ist.psu.edu/viewdoc/summary?doi=10.1.1.85.5865

G. Celniker and W. Welch, Linear Constraints for Deformable B-spline Surfaces. Symposium on Interactive 3D Graphics, pp.165-170, 1992.
DOI : 10.1145/147156.147191

D. Chauvat, Le projet VoluFormes : un exemple de modélisation déclarative avec contrôle spatial, 1994.

V. Cheutet, C. E. Catalano, J. P. Pernot, B. Falcidieno, F. Giannini et al., 3D sketching for aesthetic design using fully free-form deformation features, Eurographics Symposium Proceedings on Sketch-Based Interfaces and Modeling, pp.9-18, 2004.
DOI : 10.1016/j.cag.2005.09.009
URL : https://hal.archives-ouvertes.fr/hal-01408936

V. Cheutet, C. Catalano, J. Pernot, F. Giannini, B. Falcidieno et al., 3D Sketching with Fully Free Form Deformation Features (?-F4) for Aesthetic Design, Computers & Graphics, 2006.

V. Cheutet, J. P. Pernot, J. C. Léon, B. Falcidieno, and F. Giannini, Insertion of Planar Areas Into Free-Form Surfaces in Early Product Design, Volume 2: 31st Design Automation Conference, Parts A and B, 2005.
DOI : 10.1115/DETC2005-85045
URL : https://hal.archives-ouvertes.fr/hal-00372918

C. Chui and E. Quak, Wavelets on a Bounded Interval Numerical Methods of Approximation Theory, pp.1-24, 1992.

J. C. Chung and M. D. Shussel, Comparison of variational and parametric design. SME Aut- oFact'89 conference, 1989.

P. Cignoni, C. Montani, E. Puppo, and R. Scopigno, Multiresolution representation and visualization of volume data, IEEE Transactions on Visualization and Computer Graphics, vol.3, issue.4, pp.352-369, 1997.
DOI : 10.1109/2945.646238

B. Conrad and S. Mann, Better Pasting via Quasi-Interpolation, Curve and Surface Design: Saint-Malo, pp.27-36, 1999.

S. Coquillart, Extended free-form deformation: a sculpturing tool for 3D geometric modeling, Proceedings SIGGRAPH '90, pp.187-196, 1990.
URL : https://hal.archives-ouvertes.fr/inria-00075308

M. Daniel, Declarative approach of Curve Modeling, Third International Conference Curves and Surfaces, 1996.
URL : https://hal.archives-ouvertes.fr/hal-01316002

M. Daniel and M. Lucas, Towards Declarative Geometric Modeling in Mechanics, IDDME'96 -Integrated Design and Manufacturing . Kluwer, pp.427-436, 1997.
URL : https://hal.archives-ouvertes.fr/hal-01316178

M. Desbrun and M. P. Gascuel, Animating soft substances with implicit surfaces, Proceedings of the 22nd annual conference on Computer graphics and interactive techniques , SIGGRAPH '95, pp.287-290, 1995.
DOI : 10.1145/218380.218456
URL : https://hal.archives-ouvertes.fr/inria-00537542

E. Desmontils and D. Pacholczyk, Vers un traitement linguistique des propriétés en modélisation déclarative. Revue Internationale de CFAO et D'Informatique graphique, pp.351-371, 1997.

G. Elber, Linearizing the area and volume constraints, 2000.

G. Elber, Multiresolution curve editing with linear constraints, 6th ACM/IEEE Symposium on Solid Modeling and Applications, pp.109-119, 2001.
DOI : 10.1115/1.1430679

G. Farin, Curves and Surfaces for Computer Aided Geometric Design, 1996.

G. Farin, G. Rein, N. Sapidis, and A. J. Worsey, Fairing cubic B-spline curves, Computer Aided Geometric Design, vol.4, issue.1-2, pp.91-103, 1987.
DOI : 10.1016/0167-8396(87)90027-6

A. Finkelstein and D. H. Salesin, Multiresolution curves Computer Graphics Proceedings (SIG- GRAPH '94), pp.261-268, 1994.

M. Fontana, F. Giannini, and F. Meirana, FREE FORM FEATURES FOR AESTHETIC DESIGN, International Journal of Shape Modeling, vol.06, issue.02, pp.273-302, 2000.
DOI : 10.1142/S0218654300000168

M. Fontana, F. Giannini, and M. Meirana, A Free Form Feature Taxonomy, Proceedings EU- ROGRAPHICS '99, pp.18-646, 1994.
DOI : 10.1111/1467-8659.00332

D. Forsey and R. Bartels, Hierarchical B-spline refinement, Proceedings of SIGGRAPH '88, pp.205-212, 1988.
DOI : 10.1145/54852.378512

B. Fowler, Geometric manipulation of tensor product surfaces Proceedings of the 1992 symposium on Interactive 3D graphics, pp.101-108, 1992.

B. Fowler and R. Bartels, Constraint-based curve manipulation, IEEE Computer Graphics and Applications, vol.13, issue.5, pp.43-49
DOI : 10.1109/38.232098

V. Gaildrat, Modélisation déclarative d'environnements virtuels : Création de scènes et de formes complexes par l'´ enoncé de propriétés et l'emploi d'interactions gestuelles, Habilitationàtionà Diriger des Recherches, vol.2003

V. Gaildrat, R. Caubet, and F. Rubio, Conception d'un modeleur déclaratif de scènes tridimensionnelles pour la synthèse d'image. MICAD '93, pp.265-284, 1993.

J. E. Gain and N. A. Dodgson, Preventing self-intersection under free-form deformation, IEEE Transactions on Visualization and Computer Graphics, vol.7, issue.4, pp.289-298, 2001.
DOI : 10.1109/2945.965344

M. Gleicher, Integrating constraints and direct manipulation, Proceedings of the 1992 symposium on Interactive 3D graphics , SI3D '92, pp.171-174, 1992.
DOI : 10.1145/147156.147194
URL : http://citeseerx.ist.psu.edu/viewdoc/summary?doi=10.1.1.103.9610

C. Gonzalez-ochoa, S. Mccammon, and J. Peters, Computing moments of objects enclosed by piecewise polynomial surfaces, ACM Transactions on Graphics, vol.17, issue.3, pp.143-157, 1998.
DOI : 10.1145/285857.285858

C. Gonzalez-ochoa and J. Peters, Localized-hierarchy surface splines (LeSS) SI3D '99: Proceedings of the 1999 symposium on Interactive 3D graphics, pp.7-15, 1999.

S. Gortler and M. Cohen, Hierarchical and Variational Geometric Modeling with Wavelets. 1995 Symposium on 3D Interactive Graphics, pp.35-41, 1995.
DOI : 10.1145/199404.199410
URL : http://citeseerx.ist.psu.edu/viewdoc/summary?doi=10.1.1.2.7793

G. Greiner, Variational Design and Fairing of Spline Surfaces, Proc. Eurographics, pp.143-154, 1994.
DOI : 10.1111/1467-8659.1330143

G. Greiner and J. Loos, Data Dependent Thin Plate Energy and Its Use in Interactive Surface Modeling. Eurographics '96, pp.176-185, 1996.

H. Hagen and P. Santarelli, Variational Design of Smooth B-spline Surfaces, Topics in Geometric Modeling. SIAM Philadelphia, pp.85-94, 1992.

H. Hagen and G. Schulze, Automatics Smoothing with Geometric Surface Patches Aided Geometric Design, pp.231-236, 1997.
DOI : 10.1016/0167-8396(87)90014-8

S. Hahmann, Shape Improvement of Surfaces Computing Suppl, pp.135-152, 1998.

S. Hahmann and G. P. Bonneau, Triangular G1 interpolation by 4-splitting domain triangles, Computer Aided Geometric Design, vol.17, issue.8, pp.731-757, 2000.
DOI : 10.1016/S0167-8396(00)00021-2
URL : https://hal.archives-ouvertes.fr/hal-00319653

S. Hahmann and G. P. Bonneau, Polynomial surfaces interpolating arbitrary triangulations, IEEE Transactions on Visualization and Computer Graphics, vol.9, issue.1, pp.99-109
DOI : 10.1109/TVCG.2003.1175100
URL : https://hal.archives-ouvertes.fr/hal-00319652

S. Hahmann, B. Sauvage, and G. P. Bonneau, Area preserving deformation of multiresolution curves, Computer Aided Geometric Design, vol.22, issue.4, pp.349-367, 2005.
DOI : 10.1016/j.cagd.2005.01.006
URL : https://hal.archives-ouvertes.fr/hal-00319648

G. Hirota, R. Maheshwari, and M. C. Lin, Fast Volume-preserving Free-form Deformation Using Multi-level Optimization, Proceedings of Solid Modeling 99, pp.234-245, 1999.
DOI : 10.1016/s0010-4485(00)00038-5
URL : http://citeseerx.ist.psu.edu/viewdoc/summary?doi=10.1.1.45.4927

C. M. Hoffmann and R. Joan-arinyo, Parametric Modeling. Handbook of Computer Aided Geometric Design, 2001.

J. Hoschek and D. Lasser, Peters, Fundamentals of Computer Aided Geometric Design. A.K, 1993.

W. M. Hsu, J. F. Hughes, and H. Kaufman, Direct Manipulation of Free-form Deformations, Computer Graphics (SIGGRAPH '92 Proceedings); july 1992, pp.177-184

R. Kazinnik and G. Elber, Orthogonal Decomposition of Non-Uniform Bspline Spaces Using Wavelets Computer Graphics forum; septenber, pp.27-38, 1997.

L. Kobbelt, A variational approach to subdivision, Computer Aided Geometric Design, vol.13, issue.8, pp.743-761, 1996.
DOI : 10.1016/0167-8396(96)00007-6

L. Kobbelt and P. Schroder, A multiresolution framework for variational subdivision, ACM Transactions on Graphics, vol.17, issue.4, pp.209-237, 1998.
DOI : 10.1145/293145.293146

R. , L. Greca, M. Daniel, and P. Veron, La description dans l'approche déclarative de la modélisation de surfaces, GTMG Nantes, vol.2002

R. and L. Greca, Approche déclarative de la modélisation de surfaces, 2005.

J. Lasseter, Principles of Traditional Animation Applied to 3D Computer Animation, Computer Graphics Proceedings (SIGGRAPH '87), pp.35-44, 1987.

D. Lesage, Un modèle dynamique de spécifications d'ingénierie basé sur une approche de géométrie variationnelle, 2002.

D. C. Lin, V. C. Gossard, and R. A. Light, Variational geometry in computer aided design Graphics, Computer, vol.15, issue.3, pp.171-177, 1981.

C. Loop, A G1 triangular spline surface of arbitrary topological type, Computer Aided Geometric Design, vol.11, issue.3, pp.303-330, 1994.
DOI : 10.1016/0167-8396(94)90005-1

W. Lorensen and H. Cline, Marching Cubes: A High Resolution 3D Surface Construction Algorithm, Proceedings of SIGGRAPH '87, pp.163-169, 1987.

M. Lounsbery, T. De-rose, and J. Warren, Multiresolution analysis for surfaces of arbitrary topological type, ACM Transactions on Graphics, vol.16, issue.1, pp.34-73
DOI : 10.1145/237748.237750

M. Lucas and E. Desmontils, Les modeleurs déclaratifs. Revue Internationale de CFAO et d'Informatique graphique, pp.10-559, 1995.

M. Lucas, D. Martin, P. Martin, and D. Plemenos, Le projet ExploFormes, quelques pas vers la modélisation déclarative de formes, Journées GROPLAN, vol.1989

T. Lyche and K. Morken, Spline Wavelets of Minimal Support Numerical Methods of Approximation Theory, pp.177-194, 1990.

R. Maccracken and K. I. Joy, Free-form deformations with lattices of arbitrary topology, Proceedings of the 23rd annual conference on Computer graphics and interactive techniques , SIGGRAPH '96, pp.181-188
DOI : 10.1145/237170.237247

R. Maculet and M. Daniel, Conception, modélisation géométrique et contraintes en CAO : Une synthèse. Revue d'Intelligence Artificielle, pp.5-6, 2004.
DOI : 10.3166/ria.18.619-645

S. Mann and T. Yeung, Cylindrical Surface Pasting, Geometric Modelling, pp.233-248, 2001.
DOI : 10.1007/978-3-7091-6270-5_13
URL : http://citeseerx.ist.psu.edu/viewdoc/summary?doi=10.1.1.45.9572

P. Marks, What do solid models need? Machine Design, 1987.

P. Martin and D. Martin, An expert system for polyhedra modelling

. Jancene, North-Holland, European Computer Graphics Conference and Exhibition; september, pp.221-232, 1988.

T. Martino, B. Falcidieno, F. Giannini, S. Hassinger, and J. Ovtcharova, Feature-based modelling by integrating design and recognition approaches, Computer-Aided Design, vol.26, issue.8, pp.646-653, 1994.
DOI : 10.1016/0010-4485(94)90107-4

K. T. Mcdonnell and H. Qin, Dynamic Sculpting and Animation of Free-form Subdivision Solids, Proceedings of IEEE Computer Animation, pp.126-133, 2000.

K. T. Mcdonnell, H. Qin, and R. A. Wlodarczyk, Virtual clay, Proceedings of the 2001 symposium on Interactive 3D graphics , SI3D '01, pp.179-190, 2001.
DOI : 10.1145/364338.364395

E. Mehlum, Non-linear Spline, Computer Aided Geometric Design, pp.173-208, 1974.

P. Michalik and B. D. Bruderlin, Constrained-based design of B-spline surfaces from curves. Solid Modeling and Applications Conference, pp.213-223, 2004.

H. P. Moreton and C. H. Séquin, Functional Optimisation for Fair Surface Design, Computer Graphics, vol.1992, issue.262, pp.167-176

J. Pernot, S. Guillet, J. Lon, F. Giannini, and B. Falcidieno, Shape control using multiple minimisations during free-form syrface deformation, ASME DETC Design Automation Conference, 2003.
DOI : 10.1115/detc2003/dac-48777

J. P. Pernot-grenoble and U. Di-genova, Fully Free Form Deformation Features for Aesthetic and Engineering Designs, 2004.

J. P. Pernot, B. Falcidieno, S. Guillet, and J. C. Léon, Aesthetic Design of Shapes using Fully Free Form Deformation Features. Tools and Methods for Competitive Engineering, pp.143-154, 2004.
URL : https://hal.archives-ouvertes.fr/hal-00360391

J. P. Pernot, S. Guillet, J. C. Léon, B. Falcidieno, and F. Giannini, Multi-Minimisations for Shape Control of Fully Free Form Deformation Features Shape Modelling Conference, 2004.

J. P. Pernot, S. Guillet, J. C. Leon, F. Giannini, B. Falcidieno et al., A shape deformation tool to model character lines in the early design phases, Proceedings SMI. Shape Modeling International 2002, 2002.
DOI : 10.1109/SMI.2002.1003542

J. Peters, $C^1 $-Surface Splines, SIAM Journal on Numerical Analysis, vol.32, issue.2, pp.32-645, 1995.
DOI : 10.1137/0732029

B. Piper, Visually smooth interpolation with triangular Bézier patches Geometric Modeling: Algorithms and new Trends, SIAM, pp.221-233, 1987.

D. Plemenos, La modélisation déclarative en synthèse d'images, tendances et perspectives. MSI 94-03, 1994.

H. Qin, C. Mandal, and B. C. Vemuri, Dynamic Catmull-Clark Subdivision Surfaces Graphics, IEEE Transactions on Visualization and Computer, vol.4, issue.3, pp.215-229, 1998.

S. F. Qin, D. K. Wright, and I. N. Jordanov, From on-line sketching to 2D and 3D geometry: a system based on fuzzy knowledge, Computer-Aided Design, vol.32, issue.14, pp.851-866, 2000.
DOI : 10.1016/S0010-4485(00)00078-6

A. Rappoport, A. Sheffer, and M. Bercovier, Volume-preserving Free-form Solids, Proceedings of Solid Modeling, vol.95, pp.361-372, 1995.
DOI : 10.1109/2945.489383

C. H. Reinsch, Smoothing by spline functions. II, Numerische Mathematik, vol.52, issue.5, pp.451-454, 1967.
DOI : 10.1007/BF02169154

A. A. Requicha and J. R. Rossignac, Solid modeling and beyond, IEEE Computer Graphics and Applications, vol.12, issue.5, pp.31-44
DOI : 10.1109/38.156011

A. A. Requicha and H. B. Voelcker, Solid Modeling: A Historical Summary and Contemporary Assessment, IEEE Computer Graphics and Applications, vol.2, issue.2, pp.9-23, 1982.
DOI : 10.1109/MCG.1982.1674149

J. R. Rossignac, Issues on feature-based editing and interrogation of solid models, Computers & Graphics, vol.14, issue.2, pp.149-172, 1990.
DOI : 10.1016/0097-8493(90)90029-W

B. Sauvage, S. Hahmann, and G. P. Bonneau, Length Preserving Multiresolution Editing of Curves. Computing, pp.161-170, 2004.
URL : https://hal.archives-ouvertes.fr/hal-00319651

P. Schroder and W. Sweldens, Spherical wavelets, Proceedings of the 22nd annual conference on Computer graphics and interactive techniques , SIGGRAPH '95, pp.161-172, 1995.
DOI : 10.1145/218380.218439

T. W. Sederberg and S. R. Parry, Free-form Deformation of Solid Geometric Models, Computer Graphics Proceedings, pp.151-160, 1986.

J. J. Shah, A schema for CAD?CAPP Integration Automation Systems Laboratory, General Electric Corp. Research and Development Center, 1986.

J. J. Shah, G. Balakershnan, M. T. Rogers, and S. D. Urban, Comparative study of procedural and declarative feature based geometric modelling, IFIP Valenciennes, pp.647-671, 1994.

H. Shi-min, Z. Hui, T. Chiew-lan, and S. Jia-guang, Direct Manipulation of FFD: Efficient Explicit Solutions and Decomposible Multiple Point Constraints. The Visual Computers, pp.17-370, 2001.

E. Stollnitz, T. Derose, and D. Salesin, Wavelets for Computer Graphics: Theory and Applications, 1996.

W. Sweldens, The Lifting Scheme: A Construction of Second Generation Wavelets, SIAM Journal on Mathematical Analysis, vol.29, issue.2, pp.511-546, 1997.
DOI : 10.1137/S0036141095289051

D. Terzopoulos and K. Fleischer, Modeling Inelastic Deformation: Viscoelasticity, Plasticity, Fracture, Computer Graphics (SIGGRAPH '88 Proceedings); august, pp.269-278, 1988.
DOI : 10.1145/54852.378522
URL : http://citeseerx.ist.psu.edu/viewdoc/summary?doi=10.1.1.133.5518

D. Terzopoulos and H. Qin, Dynamic NURBS with geometric constraints for interactive sculpting, ACM Transactions on Graphics, vol.13, issue.2, pp.103-136, 1994.
DOI : 10.1145/176579.176580

W. Tiller, L. Germany, /. Heidelberg, /. Germany, and . London, The NURBS Book 2nd Edition, p.646, 1997.

E. Van-den-berg, R. Van-der-meiden, and W. F. Bronsvoort, Specification of freeform features, Proceedings of the eighth ACM symposium on Solid modeling and applications , SM '03, 2003.
DOI : 10.1145/781606.781618

G. C. Vosniakos, Investigation of Feature-Based Shape Modelling for Mechanical Parts with Free Form Surfaces, The International Journal of Advanced Manufacturing Technology, vol.15, issue.3, pp.188-199, 1999.
DOI : 10.1007/s001700050056

J. Warren and H. Weimer, Variational Subdivision for Natural Cubic Splines Approximation Theory IX, pp.345-352, 1998.

J. Warren and H. Weimer, Subdivision Methods for Geometric Design: A Constructive Approach, 2001.

H. Weimer and J. Warren, Subdivision Schemes for Thin Plate Splines, Proceedings of Eurographics 98), pp.303-313, 1998.
DOI : 10.1111/1467-8659.00277
URL : http://citeseerx.ist.psu.edu/viewdoc/summary?doi=10.1.1.27.5680

H. Weimer and J. Warren, Subdivision Schemes for Fluid Flow Computer Graphics (SIG- GRAPH '99, Conference Proceedings, pp.111-120, 1999.
DOI : 10.1145/311535.311547
URL : http://citeseerx.ist.psu.edu/viewdoc/summary?doi=10.1.1.28.992

W. Welch and A. Witkin, Variational Surface Modeling Computer Graphics (SIGGRAPH '92 proceedings), pp.157-166

R. Whitaker and D. Breen, Level-set Models for the Deformation of Solid Objects, Implicit Surfaces '98 Eurographics and ACM-Siggraph Workshop, pp.19-36, 1998.

A. Witkin and W. Welch, Fast Animation and Control for Non-rigid Structures, Computer Graphics (SIGGRAPH '90 Proceedings), pp.243-252, 1990.

B. Wyvill, A. Guy, and E. Galin, Extending the CSG Tree. Warping, Blending and Boolean Operations in an Implicit Surface Modeling System, Computer Graphics Forum, vol.18, issue.2, pp.149-158, 1999.
DOI : 10.1111/1467-8659.00365

G. Wyvill, C. Mcpheeters, and B. , Data Structure for Soft Objects. The Visual Computer, pp.227-234, 1986.

A. Yvart, S. Hahmann, and G. P. Bonneau, Hierarchical triangular splines, ACM Transactions on Graphics, vol.24, issue.4, pp.1-18, 2005.
DOI : 10.1145/1095878.1095885
URL : https://hal.archives-ouvertes.fr/hal-00319643

D. Zorin and P. Schroder, Subdivision for Modeling and Animation Course Notes, 2000.