M. Akerholm, B. Hinterstoisser, and L. Salmen, Characterization of the crystalline structure of cellulose using static and dynamic FT-IR spectroscopy, Carbohydrate Research, vol.339, issue.3, pp.569-578, 2004.
DOI : 10.1016/j.carres.2003.11.012

M. Akgúl, E. Gúmúskaya, and S. Korkut, Crystalliné structure of heattreated scots pine [Pinus sylvestris L.] and Uluda? fin, Abies nordmanniana (Stev.) subsp. bornmvelleriane (Matt f.)] wood, pp.281-289, 2007.

G. Almeida, J. Brito, and P. Perre, Changes in wood-water relationship due to heat treatment assess on micro-samples of three Eucalyptus species, Holzforshung, vol.66, pp.80-88, 2009.

M. Bhuyian, N. Hirai, and N. Sobue, Changes of crystallinity in wood cellulose by heat treatment under dried and moist conditions, Journal of Wood Science, vol.35, issue.6, pp.431-436, 2000.
DOI : 10.1007/BF00765800

M. Borrega and P. Kärenlampi, Hygroscopicity of heat-treated Norway spruce (Picea abies) wood, European Journal of Wood and Wood Products, vol.32, issue.2, pp.233-235, 2010.
DOI : 10.1007/s00107-009-0371-8

J. Bowyer, R. Shmulsky, J. Haygreen, A. Blackwell, J. Cael et al., Forest products and wood science: an introduction, 4th edn GPC and low angle laser light scattering for determination of cellulose molecular weight distributions, International Dissolving Pulps Conference, pp.216-223, 1980.

F. Carrillo, X. Colom, J. Sunol, and J. Saurina, Structural FTIR analysis and thermal characterisation of lyocell and viscose-type fibres, European Polymer Journal, vol.40, issue.9, pp.2229-2234, 2004.
DOI : 10.1016/j.eurpolymj.2004.05.003

J. Ferry, . Dj, D. Gunnells, M. Wolcott, and L. Amos, Viscoelastic properties of polymers Changes in wood polymers during the pressing of wood-composites Cellulosics, chemical, biochemical and material aspects, pp.513-518, 1980.

M. Hakkou, M. Petrissans, E. Bakali, I. Gerardin, P. Zoulalian et al., Wettability changes and mass loss during heat treatment of wood, Holzforschung, vol.59, issue.1, pp.35-37, 2005.
DOI : 10.1515/HF.2005.006

M. Hakkou, M. Petrissans, A. Zoulalian, and P. Gerardin, Investigation of wood wettability changes during heat treatment on the basis of chemical analysis, Polymer Degradation and Stability, vol.89, issue.1, pp.1-5, 2005.
DOI : 10.1016/j.polymdegradstab.2004.10.017

C. Hill, S. Ramsay, B. Keating, K. Lain, L. Rautkari et al., The water vapour sorption properties of thermally modified and densified wood, Journal of Materials Science, vol.29, issue.7, pp.3191-3197, 2012.
DOI : 10.1007/s10853-011-6154-8

W. Hsu, W. Schwald, J. Schwald, and J. Shields, Chemical and physical changes required for producing dimensionally stable wood-based composites, Wood Science and Technology, vol.22, issue.3, pp.281-289, 1988.
DOI : 10.1007/BF00386023

Y. Ito, M. Tanahashi, M. Shigematsu, and Y. Shinoda, Mechanism of Permanent Fixation, Holzforschung, vol.52, issue.2, pp.217-221, 1998.
DOI : 10.1515/hfsg.1998.52.2.217

G. Jafarpous, E. Dantras, A. Boudet, and C. Lacabanne, Molecular mobility of poplar cell wall polymers studied by dielectric techniques, Journal of Non-Crystalline Solids, vol.354, issue.27, pp.3207-3214, 2008.
DOI : 10.1016/j.jnoncrysol.2008.01.008

B. Kolin and T. Janezic, The Effect of Temperature, Density and Chemical Composition upon the Limit of Hygroscopicity of Wood, Holzforschung, vol.50, issue.3, pp.263-268, 1996.
DOI : 10.1515/hfsg.1996.50.3.263

S. Korkut, M. Akgul, and T. Dundar, The effects of heat treatment on some technological properties of Scots pine (Pinus sylvestris L.) wood, Bioresource Technology, vol.99, issue.6, pp.1861-1868, 2008.
DOI : 10.1016/j.biortech.2007.03.038

R. Kotilainen, R. Alen, and V. Arpiainen, Changes in the chemical composition of Norway spruce (Picea abies) at 160 -260°C under nitrogen and air atmospheres, pp.384-388, 1999.

R. Kotilainen, R. Alen, and T. Toivanen, Chemical changes in black alder (Alnus glutinosa) and European aspen (Populus tremula) during heating at 150?220° in a nitrogen atmosphere, Cell Chem Technol, vol.35, pp.275-284, 2001.

M. Laka and S. Chernyavskaya, Obtaining microcrystalline cellulose from softwood and hardwood pulp, Bioresources, vol.2, pp.583-589, 2007.

C. Montero, C. B. Almeras, T. Van-der-lee, A. Gril, and J. , Relationship between wood elastic strain under bending and cellulose crystal strain, Composites Science and Technology, vol.72, issue.2, pp.175-181, 2012.
DOI : 10.1016/j.compscitech.2011.10.014
URL : https://hal.archives-ouvertes.fr/hal-00646489

P. Navi and F. Girardet, Effects of Thermo-Hydro-Mechanical Treatment on the Structure and Properties of Wood, Holzforschung, vol.54, issue.3, pp.287-293, 2000.
DOI : 10.1515/HF.2000.048

P. Navi and F. Heger, Combined Densification and Thermo-Hydro-Mechanical Processing of Wood, MRS Bulletin, vol.25, issue.05, pp.332-336, 2004.
DOI : 10.1515/hfsg.1998.52.2.211

M. Nelson, O. Connor, and R. , Relation of certain infrared bands to cellulose crystallinity and crystal latticed type. Part I. Spectra of lattice types I, II, III and of amorphous cellulose, Journal of Applied Polymer Science, vol.8, issue.3, pp.1311-1324, 1964.
DOI : 10.1002/app.1964.070080322

M. Nelson, O. Connor, and R. , Relation of certain infrared bands to cellulose crystallinity and crystal lattice type. Part II. A new infrared ratio for estimation of crystallinity in celluloses I and II, Journal of Applied Polymer Science, vol.8, issue.3, pp.1325-1341, 1964.
DOI : 10.1002/app.1964.070080323

N. Osman, N. Osman, A. Mcdonald, and M. Laborie, The chemistry of hot-pressing hybrid poplar wood. Dissertation, University of Idaho Analysis of DCM extractable components from hot-pressed hybrid poplar, Holzforschung, vol.66, pp.927-934, 2010.

N. Osman, M. Donald, A. Laborie, and M. , Bestimmung der wasserl??slichen Extrakte von hei??gepresstem Pappelholz, European Journal of Wood and Wood Products, vol.42, issue.437, pp.343-351, 2013.
DOI : 10.1007/s00107-013-0686-3

A. Penneru, K. Jayaraman, and D. Bhattacharyya, Viscoelastic behavior of solid wood under compressive loading, Holzforschung, vol.60, pp.294-298, 2006.

L. Ratkauri, C. Hill, S. Curling, Z. Jalaludin, and G. Ormondroyd, What is the role of the accessibility of wood hydroxyl groups in controlling moisture content?, Journal of Materials Science, vol.83, issue.18, pp.6352-6356, 2013.
DOI : 10.1007/s10853-013-7434-2

I. Reiniati, L. Reinprecht, F. Kacik, and R. Solar, Chemical, physical, and viscoelastic properties of hotpressed hybrid poplar. Thesis Relationship between the molecular structure and bending properties of the chemically and thermally degraded maplewood, Cellul Chem Technol, vol.33, pp.67-79, 1999.

V. Repellin and R. Guyonnet, Evaluation of a heat-treated wood solvent uptake by differential scanning calorimetry in relation to chemical composition, Holzforschung, vol.59, pp.28-34, 2005.

L. Schroeder and F. Haigh, Cellulose and wood pulp polysaccharides . Gel permeation chromatographic analysis, TAPPI J, vol.62, pp.103-105, 1979.

M. Silva, G. Machado, and J. Brito, Strength and stiffness of thermally rectified eucalyptus wood under compression, Materials Research, vol.16, issue.5, pp.1077-1083
DOI : 10.1590/S1516-14392013005000086

I. Suckling, R. Allison, S. Campion, K. Mcgrouther, and A. Mcdonald, Monitoring cellulose degradation during conventional and modified kraft pulping, J Pulp Pap Sci, vol.27, pp.336-341, 2001.

M. Sugiyama, E. Obataya, and M. Norimoto, Viscoelastic properties of the matrix substance of chemically treated wood, Journal of Materials Science, vol.33, issue.14, pp.3505-3510, 1998.
DOI : 10.1023/A:1004678506822

N. Sun, S. Das, and C. Frazier, Dynamic mechanical analysis of dry wood: Linear viscoelastic response region and effects of minor moisture changes, Holzforschung, vol.61, issue.1, pp.28-33, 2007.
DOI : 10.1515/HF.2007.006

T. Tabarsa and Y. Chui, Effect of hot-pressing on properties of white spruce, For Prod J, vol.47, pp.71-76, 1997.

B. Tjeerdsma, M. Boonstra, A. Pizzi, P. Tekely, and H. Militz, Charakterisieren von thermisch behandeltem Holz: Molekulare Ursachen f??r die Verbesserung der Holzstabilit??t, Holz als Roh- und Werkstoff, vol.48, issue.5, pp.149-153, 1998.
DOI : 10.1007/s001070050287

L. Wise, M. Murphy, D. Addieco, and A. , Chlorite holocellulose: its fractionation and bearing on summative wood analysis and on studies on the hemicellulose, Pap Trade J, vol.122, pp.35-43, 1946.

M. Wolcott, F. Kamke, and D. Dillard, Fundamentals of flakeboard manufacture: viscoelastic behavior of wood components, Wood Fiber Sci, vol.22, pp.345-361, 1990.

L. Xiao, Z. Lin, W. Peng, T. Yuan, F. Xu et al., Unraveling the structural characteristics of lignin in hydrothermal pretreated fibers and manufactured binderless boards from Eucalyptus grandis, Sustainable Chemical Processes, vol.2, issue.1, pp.9-21, 2014.
DOI : 10.1002/app.28393

S. Yildiz and E. Gumuskaya, The effects of thermal modification on crystalline structure of cellulose in soft and hardwood, Building and Environment, vol.42, issue.1, pp.62-67, 2007.
DOI : 10.1016/j.buildenv.2005.07.009

U. Yildiz, S. Yildiz, and E. Gezer, Mechanical and chemical behavior of beech wood modified by heat, Wood Fiber Sci, vol.37, pp.456-461, 2005.