Modeling permeation of volatile organic molecules through reverse osmosis spiral-wound membranes
Résumé
Reverse osmosis is an interesting process to eliminate organic solutes from distillery condensates before recycling them into the fermentation step. However, organic solutes transport phenomena through reverse osmosis membranes are specific. Rejection and sorption of five compounds were studied on a brackish water membrane. Acetic acid and 2,3-butanediol were not sorbed on the membrane while furfural and 2-phenylethanol presented strong sorption following the Langmuir pattern. These sorption effects coupled with solute molecular weight (MW) led to low rejections of acetic acid and furfural (30–60%) and high rejections of 2,3-butanediol and 2-phenylethanol (80–98%). With intermediate sorption and MW, butyric acid showed rejections between 70 and 80%. A modified solution-diffusion model was developed to take into account the sorption pattern and predict the concentration profile along the membrane on the retentate and permeate sides. Equilibrium properties were determined experimentally while transport properties were identified with data obtained from a synthetic condensate. This model was validated for various operating conditions with the synthetic and the industrial condensates. It was then used to simulate the influence of the recovery rate on the retentate and permeate concentrations. It showed the behavior differences between solutes with a linear sorption and solutes with a saturating sorption.