Mechanical equivalent diameter of single struts for the stiffness prediction of lattice structures produced by Electron Beam Melting - Archive ouverte HAL Accéder directement au contenu
Article Dans Une Revue Additive Manufacturing Année : 2015

Mechanical equivalent diameter of single struts for the stiffness prediction of lattice structures produced by Electron Beam Melting

Résumé

The Electron Beam Melting (EBM) technology enables the manufacturing of new designs and sophisticated geometries. The process is particularly well suited for the fabrication of lattice structures. A standard methodology is presented in order to predict the mechanical response of lattice structures fabricated by EBM. The inner and outer structure of single struts produced by EBM was characterized using X-ray tomography. Struts with a 1 mm diameter and different orientations respect to the build direction were analyzed. The geometry discrepancies between the designed and the fabricated strut were highlighted. Two effects were identified. (i): The produced struts are generally thinner than the designed ones. (ii): Within the produced struts, loads are not transmitted by the entire geometry. It was therefore suggested to separate the strut between the mechanically “efficient and inefficientâ€? matter. The elastic response of the strut was assumed to be represented by a circular cylinder with an equivalent diameter. Two equivalent diameters were defined. The first one is the diameter of an inscribed cylinder whereas the second one is the result of a numerical simulation based on the 3D image of the strut characterized by X-ray tomography. The methodology was then applied to an octet-truss lattice structure. The difference in terms of Young's modulus between both approaches and experimental values were discussed. The mechanical equivalent diameter obtained by numerical simulation on a 3D image of the strut allows to simulate the “trueâ€? properties of the lattice structure by taking into account the manufacturing constraints of the EBM process.
Fichier non déposé

Dates et versions

hal-01240214 , version 1 (08-12-2015)

Identifiants

Citer

Mathieu Suard, Guilhem Martin, Pierre Lhuissier, Rémy Dendievel, Frédéric Vignat, et al.. Mechanical equivalent diameter of single struts for the stiffness prediction of lattice structures produced by Electron Beam Melting. Additive Manufacturing, 2015, 8, pp.124-131. ⟨10.1016/j.addma.2015.10.002⟩. ⟨hal-01240214⟩
145 Consultations
0 Téléchargements

Altmetric

Partager

Gmail Facebook X LinkedIn More